Availability
CVR vacuum reservoirs will allow you enough extra vacuum for stopping and to power any other accessories that require a vacuum source. They feature a built-in check valve and vacuum gauge, so you can monitor the vacuum level at any time. These reservoirs are manufactured from high-quality billet aluminum and have a built-in mounting flange for fast, simple installation.
( 78 )
$123.99
With 1.9 hp and a 4:1 gear reduction ratio, these CVR Protorque starters are sure to get your engine cranking. These starters feature a unique aluminum housing to eliminate hot start problems and are adjustable (where applicable) to help clear suspension parts, oil pans, and exhaust systems. These CVR Protorque starters are sealed units with rubber O-rings and grommets and also have easily replaceable plungers and contacts.
( 161 )
$195.99
—
$247.99
Position your hose where you want it with CVR thermostat housings. These beautifully machined housings swivel 360 degrees for ease of installation. Crafted from T6-6061 billet aluminum, CVR thermostat housings are bright anodized in several finishes for a professional look under your hood. The flange is sealed at the manifold with an O-ring, eliminating the gasket, plus stainless steel hardware is included. You can count on high performance looks and operation with CVR thermostat housings.
( 67 )
$102.99
—
$118.99
CVR Protorque Ultra starters live up to their name by delivering 250+ lb.-ft. of torque. They feature a specially wound field coil and armature to deliver that torque throughout the cranking range. The machined aluminum adjustable mounting block works with most oversized kickout oil pans, and are great for big cubic inch engines. The starters use a 2.5 kW, 3.4 hp motor that'll support up to 18:1 compression ratio.
( 15 )
$240.99
Brighten up your engine bay with these CVR timing covers! Constructed from T-6 6061 billet aluminum, these covers eliminate flexing problems, holding the cam in place and keeping timing control. CVR timing covers allow your camshaft to be replaced without disturbing the oil pan seal. CVR timing covers are offered in a choice of bright anodized finishes. They come complete with bolts, gaskets, and a seal for an easy installation.
( 29 )
$241.99
CVR water pump housings are made of high-quality aluminum and mount easily in your stock location. They include all mounting hardware and gaskets for a simple installation. They make it possible to eliminate the drive belt and fan in order to save weight, as well as horsepower, and will also provide you with maximum circulation to improve cooling efficiency. If you're looking for a new water pump housing, CVR has what you need.
( 17 )
$134.99
Up the amount and speed of air into your intake plenum with CVR carburetor velocity spacers! These spacers increase the velocity of the air/fuel charge to enhance fuel atomization. Throttle response is also increased and your high-rpm power is boosted! If you want a more powerful, efficiently breathing engine, CVR carburetor velocity spacers are the solution!
( 12 )
$113.99
—
$149.99
CVR LS 2-piece timing covers work with both single- and double-roller timing chains and feature an optional passenger side female -8 AN O-ring port for the oil return line. The covers accept OEM crank seals and gaskets. They're available in billet or cast aluminum construction, with a variety of finishes. O-ring and stainless steel hardware are included. Order the CVR 2-piece timing cover recommended for your LS engine application.
( 6 )
$158.99
—
$172.99
These CVR replacement electric water pumps mount directly to stock water pump locations by removing the existing fan, pulley, plate, and impeller. Your stainless steel mounting hardware and gasket are included. CVR replacement electric water pumps eliminate the drive belt and fan to save weight and horsepower, while providing maximum circulation to improve cooling efficiency in all driving conditions, especially during idling. Features include: * Carbon ceramic seal offers 10,000-hour life expectancy * Stainless steel shaft will not corrode * Computer-designed impeller machined from T6-6061 billet aluminum * Mounts easily in stock location * 12 V, 6 amp draw * T6-6061 billet aluminum
( 4 )
$124.99
—
$249.99
CVR Propower alternators feature one-wire hookup and double-sealed, low-drag, high-speed bearings. They are available in Denso and Delco styles and a choice of amperages. CVR Propower alternators are track-tested and street-proven for the high performance you demand. Available units include: * Drag racing alternators when weight is not as crucial as amperage; these alternators provide high-output at idle * Small, compact, serious drag racing alternators with the highest amps-to-weight ratio of all CVR alternators * Alternators for Pro Street racers and others with high electrical demands; their oversize bearings make them ideal for racers who count on a durable, long-lasting unit with more amps per pound
( 1 )
$215.99
—
$225.99
CVR's Proflo maximum water pumps give you the flow that you need without costing you horsepower. CNC-machined from T6-6061 billet aluminum, these lightweight pumps have a direct-drive 12 V motor that draws a low 6.1 amps. The Proflo maximum water pumps feature a computer-designed machined billet impeller, a stainless steel shaft, and a carbon ceramic seal that offers a 10,000-hour life expectancy. These CVR Proflo maximum water pumps are available in different colors and sizes. The pumps feature a modular design and can be mounted on a number of different engine applications. Amazingly, these pumps can also be mounted in remote locations. Stainless steel fasteners are included. Additionally, the inlet fittings can be changed between the passenger and driver side to suit your radiator outlet. Proflo maximum water pumps are the cooling system components that your ride craves!
( 16 )
$247.99
Set your nitrous bottle at the proper angle with CVR nitrous bottle brackets. The proper angle gets you the proper flow, and CVR brackets are precision-machined from T6-6061 billet aluminum at the right angle for your bottle's operation. They also machine two rubber rings into the nitrous brackets to firmly hold and protect your bottles from scratching. The brackets are bright anodized in a choice of colors for long-lasting, durable protection. CVR makes high performance easier by creating bottle brackets that open a full 180 degrees, adding heavy-duty finger knobs and including stainless steel hardware. Get ready to run with nitrous and CVR nitrous bottle brackets.
Not Yet Reviewed
$238.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
