Availability
Clearance
If it weren't for axles, the wheels on your vehicle wouldn't be moving anywhere. When those all-important parts twist, break, or have other difficulties, simply replace them with Crown Automotive direct-fit axle shaft assemblies. These assemblies are available for numerous axle types, such as CV-style, C-clip, front inner and outer, and bolt-in. While some replacement axles use hardened 4340 chromoly shafts, most are designed and steel-built to OEM specs for reliability and fitment. Each axle is engineered for its particular location and differential. Crown direct-fit assemblies cover many models of vehicles.
( 93 )
$84.99
—
$229.99
$57.50
—
$162.50
Clearance
Crown Automotive ring and pinion gear and installation kit combos are complete with all the components needed to swap out your ring and pinion gears. Everything required for a gear replacement and/or upgrade is included—gaskets, seals, shims, bearings, and all necessary hardware. These convenient kits are available for a wide variety of submodels, with component ratios tailored to your specific vehicle. Crown quality combos offer great performance and the best bang for your maintenance buck!
Not Yet Reviewed
$893.99
$681.50
Clearance
You're just about to conquer a tough, rocky, tire-dropping section of trail when, "BAM!"—the U-joint grenades and takes out an ear on the yoke. Thankfully, you came prepared with Crown Automotive driveshaft yokes so you can make the repair and keep on riding. These yokes are designed and built to OEM specs for excellent fit and reliable performance. Whether you are hot rodding on the street or on a trail ride, always be prepared with Crown Automotive yokes.
( 29 )
$63.99
$43.50
Clearance
A quality pan is essential for the performance of any automatic transmission. They serve as a reservoir for your fluid, which provides lubrication, cooling, and transmission fluid pressure. Crown Automotive offers a line of replacement automatic transmission pans built to withstand the rigors of many Jeep and Mopar vehicles. The steel pans have a protective black finish, and they are available in basic stock applications, or in deep pan style kits with additional components. Don't let old or leaky fluid pans lead to erratic shifting and decrease the lifespan of your automatic transmission.
( 4 )
$31.99
$23.50
Clearance
Worn or damaged CV boots allow the grease surrounding the CV joints to become contaminated with dirt, sand, rocks, and water--which leads to rapid wear. Give those defective parts the boot. Replace them with factory-style components from Crown Automotive. These durable rubber CV boot kits will protect your axle shaft assemblies and keep them functioning smoothly. Order the correct boots for proper fitment on your Jeep, Plymouth, Dodge, Ram, Chrysler, or American Motors vehicle.
( 2 )
$14.99
—
$40.99
$8.50
—
$28.50
Clearance
From the time your vehicle starts moving until it stops, the parts in the transfer case are in action and under stress. When time, use, and stresses overcome these parts, replace them with Crown Automotive transfer case components. These components are OE-quality and designed to directly replace the originals. Transfer cases are constantly on the go, and when put into 4WD, they are downright abused. Rebuild or refresh your vehicle's case as needed with Crown Automotive transfer case components.
( 32 )
$66.99
—
$142.99
$46.50
—
$104.50
Clearance
Keep your clutch engaged and your vehicle moving smoothly. Crown Automotive clutch discs have a durable semi-metallic and metal construction to improve your shift quality. Manufactured to the initial OE part's specifications, these organic replacement discs install easily with clear-cut fitment on a wide range of vehicles. Choose the correct size and style for your particular vehicle and enhance your ride quality with factory-style components from Crown.
Not Yet Reviewed
$63.99
$45.50
Clearance
There's never a good time for transmission problems, but you can reduce the possibility of being stuck in the middle of a busy intersection by using Crown Automotive automatic transmission rebuild kits. These overhaul kits are specifically designed for each particular transmission, to help keep your Jeep or Dodge truck moving down the road instead of blocking traffic. An ounce of prevention is worth a pound of cure. Stay ahead of issues with Crown Automotive automatic transmission rebuild kits.
Not Yet Reviewed
$154.99
$114.50
Clearance
Crown Automotive manual transmission bearings enable your tranny to operate at peak performance. Your transmission has bearings that will keep it running smoothly, and Crown offers a diverse selection of replacements to fit your vehicle—whether it is vintage, classic, or a little more modern. From input, output, and main shaft bearings, needle bearings for gears and much more, Crown Automotive manual transmission bearings will help you shift from harsh performance into efficient and reliable operation once again.
( 1 )
$74.99
—
$100.99
$56.50
—
$75.50
Clearance
Crown Automotive converter drive plates can restore efficient transmission drive and also maintain starter operation. With a superior grade metal construction, these converter drive plates are a direct replacement for the OEM part, so installation is at least as straightforward as with the stock component. Order the model designed to fit your application. Whether you're looking to service, optimize, or upgrade, Crown Automotive has quality parts to get your Jeep and Mopar vehicles back on the road.
Not Yet Reviewed
$86.99
$59.50
Clearance
Whether you're switching gear ratios or replacing older ring and pinions with worn or chipped teeth, your vehicle will need new Crown Automotive pinion bearings. They're designed and built to OEM specs for easy fitment and reliable service on stock axles. Always remember to order new bearing cups, as well, unless they're included as part of your kit. These pinion bearings are available for a wide range of specific vehicles. When replacing the ring and pinion, choose Crown Automotive pinion bearings for the right fit every time.
Not Yet Reviewed
$25.99
$18.50
Clearance
With all of the horsepower and torque being transferred to differentials, it's amazing how long they last. Crown Automotive differential carrier replacement parts are designed to get your vehicle moving down the road and trail again. These parts are designed and built to OEM specs for excellent fit and reliable performance.
Not Yet Reviewed
$6.99
$3.50
Clearance
Flywheel ring gears can easily be replaced on your manual transmission for a lot less money than the entire flywheel. Crown Automotive has the OE-style flywheel ring gears which will allow your starter to get the engine spinning. If the pinion teeth don't mesh cleanly with the ring gear, it will cause accelerated wear on your flywheel and starter. Heavy-duty steel gears from Crown will get you moving again at peak performance.
( 1 )
$29.99
$21.50
Clearance
Crown Automotive ring and pinion gear installation kits have everything you need for a complete master overhaul to your bearing and seal kits. Make sure you have all of the components you need before beginning an axle rebuild project. These Crown kits conveniently assemble quality parts to streamline the rebuild on your particular make and model.
( 2 )
$143.99
$99.50
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
