Availability
Crown Automotive steering knuckle seals install between the steering knuckle and axle housing. Kits may include retaining plates and seals and are application-specific. Check attributes for proper fitment. Crown Automotive is renowned for manufacturing the highest quality OE replacement parts.
( 5 )
$13.99
—
$24.99
Crown Automotive clutch pivot repair kits can help you maintain your clutch linkage and keep your clutch engaging smooth and easy. Over time your clutch pedal bushings will wear out and become sloppy. These quality OE type kits include bushings, clips, and end boots. They are an easy install and a must for your old Jeep that has shifted gears for many miles.
( 5 )
$10.99
Crown Automotive automatic transmission kickdown cables will help to keep your vehicle shifting smoothly. These throttle control cables are engineered for an OE fit and performance to make your install efficient and operation predictable. Over time cables age, stretch, or even break. Maintain optimum performance with Crown Automotive automatic transmission replacement kickdown cables.
( 30 )
$20.99
When you see oil leaking from your Jeep's rear axle, it's time to order new Crown Automotive axle seals. These seals are designed for oil bath axles and are built identically to the originals for excellent fit and finish. Whether your brakes end up coated in oil or the lube simply runs onto the ground, these economical Crown Automotive axle seals will solve messy problems that could lead to more serious issues. Dozens of styles are available to service numerous vehicle applications.
( 13 )
$10.99
—
$21.99
That whining and grinding noise down near the clutch isn't going away—until you address the problem. When the pilot bearing on your vehicle is damaged or worn-out, replace it with a new unit from Crown Automotive. These bearings or bushings are designed and built to OEM specs for excellent fit and reliable performance. They're available in a variety of styles for fitment on specific vehicle applications. Silence the excess noise with Crown Automotive pilot bearings.
( 9 )
$12.99
—
$17.99
Get a grip! Be kind to your hands and replace your broken, loose, or flimsy knobs with quality replacement parts from Crown Automotive. Their transfer case shift knobs will complement your project. Whether it's a restoration or a rebuild, Crown can help complete your gearshift setup.
( 5 )
$16.99
Crown Automotive ring gear bolt kits attach your differential to the carrier. These replacement ring gear bolts will help give you the peace of mind that you did the job right the first time. They are designed to handle the incredible shock loads of a drag racing launch or city driving.
( 5 )
$11.99
—
$17.99
Jeeps are built to be driven hard. Crown Automotive manual shifter replacement components are offered in a large line of quality, vehicle-specific parts-- from boots to grommets, rail caps to levers. Whether you're upgrading or replacing your setup, check out their complete line.
( 8 )
$11.99
Crown Automotive replacement brake hub dust caps seal out moisture and dirt. They are made from quality steel and are zinc plated.
Not Yet Reviewed
$11.99
Fix your light issues with Crown Automotive neutral and backup safety switches, direct replacements for your original equipment at a reasonable price. Neutral safety switches prevent the vehicle from starting when in any other gear besides "Neutral" and "Park"—and they double as a backup light switch. Backup switches can make other drivers aware of your intentions when you shift into reverse. These small replacement units help to prevent accidents which may occur if your old switches become loose or have degraded over time. Crown safety switches are available in various styles for fitment on numerous makes and models.
( 17 )
$13.99
—
$17.99
Crown Automotive transfer case shift linkage repair kits are available to stop the thumping or creaking noise which you may have heard coming from the transmission tunnel area on acceleration, or while driving over bumpy roads. The bushings and boots can wear out, or the rubber gasket tears on the end. This allows the torque shaft to travel back and forth too much, causing one of the links to tap on the bracket on the tub. These kits come complete to solve that annoying rattle.
( 3 )
$17.99
Crown Automotive clutch linkage rods provide the fit and function of factory-style equipment. And that means smoother shifts for you. These OE replacements are made from quality materials and are available in a couple of styles and several applications to renew your vehicle's performance.
( 11 )
$11.99
—
$19.99
Get the right axle spacing for your Jeep application when you use Crown Automotive axle bearing spacers. These steel drivetrain accessories are machined to fit the specific vehicle and axle models.
Not Yet Reviewed
$12.99
Crown Automotive axle seal retainers are designed to hold the seal and axle shaft securely to the rear housing. These steel retainers are available in a natural or zinc plated finish, will hold up well to the elements, and provide years of reliable service.
( 6 )
$11.99
—
$21.99
If your clutch pedal doesn't return all the way after being depressed it could be due to cracked bellcrank brackets. Replace them with Crown Automotive clutch bellcrank brackets. Cracked brackets will flex under load, which gets the master cylinder misaligned and causes the piston to bind inside of the cylinder. With Crown heavy-duty steel parts, you'll restore a much better feel to your clutch.
( 1 )
$14.99
Crown Automotive engine separator plates are direct OE-replacement Jeep parts. These bellhousing to engine spacer plates are constructed from steel with a natural finish. Crown Automotive has long been the leading manufacturer and distributor of replacement parts for Jeeps, as well as some Chrysler and Dodge aftermarket parts.
( 2 )
$16.99
Worn or damaged CV boots allow the grease surrounding the CV joints to become contaminated with dirt, sand, rocks, and water--which leads to rapid wear. Give those defective parts the boot. Replace them with factory-style components from Crown Automotive. These durable rubber CV boot kits will protect your axle shaft assemblies and keep them functioning smoothly. Order the correct boots for proper fitment on your Jeep, Plymouth, Dodge, Ram, Chrysler, or American Motors vehicle.
( 2 )
$15.99
—
$26.99
Rear outer wheel bearings are extremely important for keeping the axle centered and transferring torque—but it's the retaining rings that keep everything in place, allowing it to work. Crown Automotive axle shaft bearing retaining rings are a perfect replacement when changing bearings. These units are designed and built to OE specs for excellent fit and reliable performance. Crown Automotive retaining rings help keep bearings under control and spinning down the road.
( 1 )
$11.99
—
$13.99
Crown Automotive offers a wide selection of axle bearings to meet your application needs. They have bearings for the front and rear that will keep your axles spinning without resistance. Whether you need just a bearing or a complete bearing and seal kit, Crown Automotive has the quality choices to get your project revolving.
( 31 )
$11.99
—
$22.99
No matter what decade your Jeep rolled off the assembly line, it goes without saying that you shift gears early and often. When your clutch linkage components begin to show their age, Crown Automotive offers a large selection of replacements--such as adjusters, springs, pedal rods, yokes, clevises, bellcrank bearings, and bushing clips. These parts are precision-manufactured from quality materials to provide the correct fit and function for specific models.
( 1 )
$10.99
—
$19.99
Crown Automotive pinion crush sleeves and spacers are durable steel parts which aid in properly securing your replacement pinion seals to the shaft and preventing oil leaks. Don't take shortcuts with your geartrain assemblies--Crown direct-fit parts are vehicle-specific quality replacements.
( 1 )
$10.99
—
$12.99
Vehicles with manual transmissions are not only fun to drive, but also allow excellent control during all weather conditions and environments. Crown Automotive clutch forks can help you cure clutch issues. They're designed and built to OE specs for easy installation and reliable service. Forks deal with a lot of pressure, so they should be checked for cracks on a regular basis. Crown replacement clutch forks are designed for proper fitment on a variety of makes/models.
( 7 )
$13.99
—
$19.99
From the time your vehicle starts moving until it stops, the parts in the transfer case are in action and under stress. When time, use, and stresses overcome these parts, replace them with Crown Automotive transfer case components. These components are OE-quality and designed to directly replace the originals. Transfer cases are constantly on the go, and when put into 4WD, they are downright abused. Rebuild or refresh your vehicle's case as needed with Crown Automotive transfer case components.
( 32 )
$11.99
Crown Automotive knows that wheel bearings can eventually wear out. If you notice excessive play or noise—especially when cornering—and adjustment doesn't fix the problem, the wheel bearings and seals in your Jeep may need replaced. Because wheel bearings are a vital part of your vehicle's suspension, if they become worn or damaged, maintenance should be performed as soon as possible. Crown is a name you can trust for quality automotive parts for numerous vehicles.
( 5 )
$15.99
—
$19.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
