Availability
Racers know that wheel stands look spectacular but hurt performance. Competition Engineering's Wheel-E-Bars control wheel stands without unloading the rear tires, putting more power into moving the car forward. These bars feature upper spring adjusters made from 7075-T6 aluminum for easy preload adjustment, lower 6061-T6 aluminum struts for fatigue resistance, and natural rubber wheels with aluminum ball-bearing hubs. The kits also include all fasteners and quick-release pins for easy access to the rear housing.
( 18 )
$585.99
—
$692.99
Competition Engineering designed these bars specifically for the street enthusiast. Using the same components as its Professional Wheel-E-Bars, Competition Engineering designed bolt-on mounting brackets to replace the harder-to-install weld-on brackets.
( 19 )
$641.99
These Universal Wheel-E-Bar kits allow the professional chassis builder to fabricate bars to fit a specific vehicle. Each kit is available in your choice of sprung or unsprung versions. The 60 in. long tubes can be cut to the desired length to suit individual needs. As an added feature, each kit includes the necessary material to install an upper cross brace for increased strength.
( 4 )
$532.99
—
$692.99
With Ladder Link bars from Competition Engineering, you can fine-tune the suspension without taking the bars off of your vehicle. These bars won't bind like other bars, either, because of the dual-pivoting adjustable lower links. The bars are made of steel tubing for strength. They also have high-quality spherical front rod ends and forged solid rear rod ends.
( 9 )
$517.99
These Summit Racing™ front coil spring and drag shock Pro Packs will help you get those consistent ETs that you need at the track. They include a set of front coil springs that are available in different spring rates for different vehicle weights. Plus, you get a set of front and rear adjustable drag shocks, so you can choose the valving that is best for your specific application. Quicker, more reliable starting line launches are here--pick up one of these Summit Racing™ front coil spring and drag shock Pro Packs to get the job done.
( 1 )
$508.95
—
$580.95
Competition Engineering Magnum 4-link kits offer the ultimate strength and adjustability for your high horsepower race car. Your big power racer needs more than directly-threaded links. These Magnum kits feature special threaded tube inserts that weld into thick-walled chromoly steel link tubing to handle shock loads without flexing. Plus, the 1/4 in. thick housing and frame brackets feature integral shock mounting holes to save you fabrication time on separate shock brackets along with additional mounting holes for wheelie bars, sway bars, and additional tube gusseting. Your high performance race car needs high performance traction devices; get connected with Competition Engineering Magnum 4-link kits. Features: * Chromoly steel tube links * Computer machined treaded tube ends * Thick steel brackets * Chromoly spherical rod ends * 21 in. mounting radius * Hardware and instructions
( 10 )
$698.99
The guys at Competition Engineering say these Slide-A-Link traction bars will cut half a tenth off of your 60 ft. times. The secret is their innovative telescoping design, which gives you two full inches of adjustability when setting pinion angle and spring preload. That gives you more control over front-end lift and weight transfer, so you can make quick, easy, on-car adjustments to track conditions. The bars come with special urethane bushings that store energy to prevent unloading between shifts, replacement lower axle mount pads, 1/2 in. U-bolts, aluminum front spring eye bushings, hardware, and complete instructions.
( 12 )
$629.99
—
$800.99
These Summit Racing™ frame rail and subframe connector Pro Packs will help to firm up your rear suspension for optimum traction control. They include a set of 2 in. x 3 in. steel formed rear frame rails and a set of weld-on subframe connectors. Put the maximum horsepower to the ground with one of these Summit Racing™ frame rail and subframe connector Pro Packs.
( 2 )
$601.98
—
$616.98
Competition Engineering anti-roll bar kits make it possible for you to preload the chassis, eliminating body roll during hard launches. This allows the car to drive straighter off the starting line, helping to improve 60 ft. times.
Not Yet Reviewed
$522.99
If you're going racing and have a hi-po engine in your unibody car, you might end up losing traction or twisting the body. What you need is extra support, and Competition Engineering subframe connectors give you that. Constructed of mild steel tubing, these connectors include all hardware and instructions.
( 161 )
$573.99
Competition Engineering universal 80 in. single wheelie bar kits are perfect for the professional and amateur chassis builder. They feature the lower tube and wheel pocket and are welded for perfect alignment, while still allowing the builder to trim them to any desired length. The bars are 1 in. diameter x 0.065 in. thick wall chromoly tubing that is strong, yet lightweight, while the two high-misalignment rod ends allow the bar to adjust to any rear axle housing without the need for a tubing bender. The kits include all necessary hardware and a set of detailed instructions.
( 1 )
$637.99
Competition Engineering rear coilover shock absorbers come with 12-way adjustability, allowing you to tune the suspension from soft to firm with the simple turn of a knob. They work with a variety of applications, including drag race, Pro Street, street rods, and kit cars. Their billet housing is CNC-machined from aluminum and they flaunt a black anodized body. The spring seats are adjustable for a preload and accept 2 1/2 in. I.D. springs. The 5/8 in. hardened chrome piston rod provides superior strength, while the advanced sealing reduces drag for a faster reaction. Also included are two 1 in. wide spherical mounting bearings with locking snap rings.
( 1 )
$579.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
