Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
On Sale
Competition Engineering Weld-On Subframe Connectors
If you're going racing and have a hi-po engine in your unibody car, you might end up losing traction or twisting the body. What you need is extra support, and Competition Engineering's weld-on subframe connectors give you that. Constructed of mild steel tubing, they solidly connect your car's front and rear subframes.
( 14 )
$177.99
—
$184.99
$160.19
—
$166.49
On Sale
Competition Engineering Tubular Driveshaft Safety Loops
In the event of U-joint failure, Competition Engineering universal driveshaft loops will contain your driveshaft. Made of mandrel-formed 1.25 in. O.D. x .083 in. wall mild steel tubing, these kits offer a lightweight, weld-in alternative to bolt-on types. The driveshaft loop portion is a bolt-on design, for easy removal of the driveshaft.
( 24 )
$114.99
—
$194.99
$103.49
—
$175.49
On Sale
Competition Engineering Ladder Bar Crossmembers
These Competition Engineering ladder bar crossmembers are designed to be strong mounting points for the front rod ends. They will fit most chassis, while acting as a ladder bar mount and rear driveshaft loop.
( 14 )
$119.99
—
$242.99
$107.99
—
$218.69
On Sale
Competition Engineering Cable-Style Front End Travel Limiters
Competition Engineering cable-style front-end travel limiters are designed to fit both A-arm and strut front suspensions. Their 7-position adjuster enables you to fine-tune front-end separation, improving 60 ft. times as well as vehicle reaction time. These kits include weld-on mounting tabs, cable assemblies, mounting hardware, and detailed instructions.
( 4 )
$111.99
$100.79
On Sale
Competition Engineering Bolt-On Conversion Kits
These Competition Engineering bolt-on conversion kits are designed to allow the bolt-on aluminum strut wheelie bar kit to be bolted on to any rear-end housing. They include all necessary mounting brackets and hardware for installation.
( 5 )
$124.99
$112.49
On Sale
Competition Engineering Fuel Tank Sump Kits
These Competition Engineering fuel tank sump kits mount in the lowest, rear-most part of your tank, so that they maximize pressure on the inlet side of your fuel pump.
( 19 )
$121.99
$109.79
On Sale
Competition Engineering Seat Back Braces
Competition Engineering seat back braces stem from the reality that in a fraction of a second, anything can happen while racing. By tying your seat into the sturdy roll cage, it'll stay in place under heavy acceleration, braking, cornering, and damaging situations. These braces use a 3 in. by 6 in. backing plate for attachment to the back of non FIA-approved seats; they can also be used on approved seats for added support. The braces feature a locking collar to allow the seat to move back and forth, and no welding is required for installation. A well-built roll cage is the safest part of a vehicle--keep your seat attached the frame with a Competition Engineering back brace kit.
( 24 )
$155.99
$140.39
On Sale
Competition Engineering 10-Point Roll Bar Strut Kits
Wrap yourself in even more cabin protection, these Competition Engineering 10-point roll bar strut kits are the partner package for the 10-point roll bar main hoop kits. They include the two rear struts, two front door bars, ten 6 in. x 6 in. x 1/8th in. mounting pads, and 12 joint gussets. These combined with the main hoop kit give you the surrounding protection of a 10-point roll cage. This type of modification is required in most circuits of racing to provide increased cabin safety, while also improving the vehicles side impact protection. Best installed with the interior removed, they do require a mild amount of fabrication to properly fit to your vehicles application. Common installation steps may involve trimming length to fit your desired interior design, and welding is definitely involved. Working with the interior taken out also makes it much easier to get proper fitment, and assure proper welds are achieved. These strut kits will require the appropriate main hoop kits to complete the cage install. Both the main hoops and the strut kits are available in mild steel and chromoly, so make sure you get the right material for your designed cockpit.
( 3 )
$184.99
$166.49
On Sale
Competition Engineering Transmission Crossmembers
These universal transmission crossmembers from Competition Engineering make transmission installation and removal quick and easy. They include a 1 5/8 in. x .134 in. wall tube, four flat mounting tabs, and four concave mounting tabs with all hardware. Welding is required.
( 16 )
$119.99
$107.99
On Sale
Competition Engineering Lower Coilover Shock Mount Kits
Competition Engineering lower coilover shock-mount kits provide a solid, adjustable mounting point for racing coilover-type shocks. Machined spacers are included to adapt the components to various brands of shocks. These kits may be used with your own upper mount or with Competition Engineering's universal upper coilover mount kit, sold separately. Welding is required.
( 22 )
$114.99
$103.49
On Sale
Competition Engineering Roll Cage Struts
High horsepower and torque leads to chassis flex. Competition Engineering roll cage struts defeat chassis flex and lessen your vehicle's reaction time by tying the front frame to the roll cage. These 1 5/8 in. by .134 in. wall mild steel tubing struts are mandrel-formed, meet NHRA and IHRA requirements, and are pre-notched for easy attachment to the roll cage. Welding is required. Competition Engineering roll cage struts secure the roll cage to the front of the frame--making for one tough, solid unit on the race track.
( 5 )
$114.99
$103.49
On Sale
Competition Engineering 9 in. Ford Axle Housing Braces
Keep your 9 in. Ford axle housing steady with these braces from Competition Engineering. Their 2-piece CAD design is CNC-manufactured, so they are contoured to fit for easier welding. These braces are made from 1/8 in. mild steel to ensure power is transferred to the wheels instead of twisting the housing.
( 2 )
$147.99
—
$188.99
$133.19
—
$170.09
On Sale
Competition Engineering Wishbone Rear Axle Locators
Competition Engineering wishbone rear axle locators are designed to eliminate any sway in a ladder bar or 4-link system. They include 3/4 in. forged solid steel rod ends, steel or chromoly tubing, and installation brackets and hardware. The rear axle locators are available in both welded and un-welded versions, but will require welding for installation to the vehicle and rear-end housings.
( 5 )
$231.99
$208.79
On Sale
Competition Engineering Offset Spring Hangers
Originally designed for Super Stock classes, these offset spring hangers are designed to relocate the rear of the leaf springs inboard 4 in. for additional tire clearance. Welding is required for installation; they're not for use with weld-in frame connectors.
( 2 )
$128.99
$116.09
On Sale
Competition Engineering Universal Window Frame Kits
These Competition Engineering universal window frame kits are designed for drag racing vehicles with plastic or Lexan-style windows. They include 3/8 in. round steel tubing, a bending fixture to custom-bend to your window, mounting tabs, and installation hardware. The kits will complete two doors, and require welding to complete the frame.
( 1 )
$221.99
$199.79
On Sale
Competition Engineering Forged Rear Axle Housing Ends
Whether narrowing a rear axle housing for bigger tires or just building a new housing for your street car, you will need housing ends to complete the project. You could re-use the old housing ends but most of the time they are either too rusty or damaged from the removal process. Competition Engineering's Forged Rear Housing Ends are offered in five popular styles, each CAD designed to ensure a proper fit. They are forged from mild steel to allow for ease of welding and then fully machined on CNC equipment. A black oxide coating protects them from rust and allows them to be welded without major grinding.
( 1 )
$146.99
$132.29
On Sale
Competition Engineering Roll Cage Upgrade Kits
These kits from Competition Engineering are designed to upgrade your existing roll cage to meet NHRA requirements when the firewall, floor pan, or rocker panels have been modified or replaced with aluminum panels. Manufactured from 1 5/8 in. diameter x .134 in. wall tubing, these kits come complete with one dash bar, two door diagonals, two rocker bars, and six gussets. Welding and fabrication are required.
Not Yet Reviewed
$174.99
$157.49
On Sale
Competition Engineering Rear Coilover Mount Kits
Competition Engineering rear coilover mount kits without shocks and springs are designed specifically to improve traction and handling. The upper and lower shock mounts fit stock rear locations, and the bolt-in design requires no welding or fabricating. All hardware and spacers are included.
Not Yet Reviewed
$177.99
$160.19
On Sale
Competition Engineering Rear Axle Housing Ends
Whether narrowing a rear axle housing for bigger tires, or just building a new housing for your street car, you will need housing ends to complete the project. These Competition Engineering rear housing ends are offered in five popular styles, each CAD-designed to ensure a proper fit. They are forged from mild steel for ease of welding, and then fully machined on CNC equipment.
Not Yet Reviewed
$159.99
—
$176.99
$143.99
—
$159.29
On Sale
Competition Engineering Ultra Magnum Series Diagonal Links
Designed to eliminate side-to-side housing movement, these Competition Engineering Ultra Magnum Series diagonal links are superior to the panhard bar for eliminating sway in ladder bar and 4-link suspensions. They include left and right-hand threaded rod ends to allow for on-car adjustments and can be shortened to fit a narrow chassis. Ultra Magnum Series weld-on diagonal link kits by Competition Engineering help keep your rear axle housing centered in the chassis for straight tracking. Product features: * Constructed from chromoly steel tubing * 1.000 in. diameter x 0.065 in. wall thickness x 36.000 in. overall length * Kit includes weld-in tube adapters, mounting brackets with 1/2 in. holes, plus all rod ends and mounting hardware
Not Yet Reviewed
$134.99
$121.49
On Sale
Competition Engineering 10-Point Roll Bar Conversion Kits
If you're going to be running 10.99 seconds or quicker in NHRA, you must have at least a 10-point roll cage. If you currently have an 8-point roll bar installed, one of Competition Engineering's 10-point roll bar conversion kits will upgrade your 8-point bar to a 10-point cage. These weld-in kits consist of a top hoop, which attaches to the front of the existing roll bar and follows the perimeter of the roof, plus two supports for the front of the top hoop. Both the top hoop and the supports are made from rugged, 1 5/8 in., 0.134 in. wall, computer mandrel-bent, mild-steel tubing. Even if you aren't required to have a 10-point cage, upgrading your existing 8-point bar will add protection, as well as chassis stiffness that can translate into better reaction times.
( 6 )
$216.99
—
$225.99
$195.29
—
$203.39
On Sale
Competition Engineering Funny Car Cage Kits
Competition Engineering funny car cage kits are crafted from aircraft-quality chromoly tubing. They're designed to upgrade your 10-point roll cage kit to have funny car cage protection. They are left long and un-notched so that they can be custom-fitted to your application and meet NHRA and IHRA requirements. If you need a kit to upgrade your kit from a 10-point or more roll cage to a funny car cage, Competition Engineering has you covered.
( 16 )
$228.99
$206.09
On Sale
Competition Engineering Front Motor Plates
Keep your engine from twisting in the chassis! Competition Engineering front motor plates provide a solid connection between your engine and chassis, eliminating movement and helping to improve reaction times. These motor plates are made from 1/4 in. thick 6061-T6 aluminum and are computer-designed and machined. They're perfect for engine swaps or for setting the motor back in the chassis for increased weight transfer.
( 31 )
$196.99
—
$241.99
$177.29
—
$217.79
On Sale
Competition Engineering Rear Shock Crossmembers
Competition Engineering rear shock crossmembers provide a stronger mounting point for your shock absorbers on the inboard of the frame. Built to handle the stress of racing, they are made of 2 in. x 1 1/2 in. x .083 in. wall steel. As an added benefit, they will also strengthen the rear subframe.
( 9 )
$200.99
$180.89
