Availability
On Sale
Wrap yourself in even more cabin protection, these Competition Engineering 10-point roll bar strut kits are the partner package for the 10-point roll bar main hoop kits. They include the two rear struts, two front door bars, ten 6 in. x 6 in. x 1/8th in. mounting pads, and 12 joint gussets. These combined with the main hoop kit give you the surrounding protection of a 10-point roll cage. This type of modification is required in most circuits of racing to provide increased cabin safety, while also improving the vehicles side impact protection. Best installed with the interior removed, they do require a mild amount of fabrication to properly fit to your vehicles application. Common installation steps may involve trimming length to fit your desired interior design, and welding is definitely involved. Working with the interior taken out also makes it much easier to get proper fitment, and assure proper welds are achieved. These strut kits will require the appropriate main hoop kits to complete the cage install. Both the main hoops and the strut kits are available in mild steel and chromoly, so make sure you get the right material for your designed cockpit.
( 3 )
$184.99
$166.49
On Sale
Competition Engineering funny car cage kits are crafted from aircraft-quality chromoly tubing. They're designed to upgrade your 10-point roll cage kit to have funny car cage protection. They are left long and un-notched so that they can be custom-fitted to your application and meet NHRA and IHRA requirements. If you need a kit to upgrade your kit from a 10-point or more roll cage to a funny car cage, Competition Engineering has you covered.
( 16 )
$228.99
$206.09
On Sale
If you're going to be running 10.99 seconds or quicker in NHRA, you must have at least a 10-point roll cage. If you currently have an 8-point roll bar installed, one of Competition Engineering's 10-point roll bar conversion kits will upgrade your 8-point bar to a 10-point cage. These weld-in kits consist of a top hoop, which attaches to the front of the existing roll bar and follows the perimeter of the roof, plus two supports for the front of the top hoop. Both the top hoop and the supports are made from rugged, 1 5/8 in., 0.134 in. wall, computer mandrel-bent, mild-steel tubing. Even if you aren't required to have a 10-point cage, upgrading your existing 8-point bar will add protection, as well as chassis stiffness that can translate into better reaction times.
( 6 )
$220.99
—
$225.99
$198.89
—
$203.39
Designed to eliminate side-to-side movement of the rear axle housing, Competition Engineering panhard bars keep your tires from hitting the wheelwells and allow the car to run straight down the track. The 30 in. long bars can be trimmed to fit most applications and include gusseted mounting brackets, spherical rod ends, hardware, and instructions.
( 20 )
$167.99
On Sale
When you want your ride to be as safe as possible, these Competition Engineering 12-point roll bar strut kits give you superior strength and driver protection with proper installation. These strut kits are the partner package for the 12-point roll bar main hoop kits. They include the two rear struts, two front door bars, two diagonal hoop supports, one rear X-brace, ten 6 in. x 6 in. x 1/8th in. mounting pads, and 12 weld joint gussets. These combined with the main hoop kit give you the surrounding protection of a 12-point roll cage. This type of modification is required in most circuits of racing to provide increased cabin safety, while also improving the vehicles side impact protection. Best installed with the interior removed, they do require a mild amount of fabrication to properly fit to your vehicles application. Common installation steps may involve trimming length to fit your desired interior design, and welding is definitely involved. Working with the interior taken out also makes it much easier to get proper fitment, and assure proper welds are achieved. These strut kits will require the appropriate main hoop kits to complete the cage install. Both the main hoops and the strut kits are available in mild steel and chromoly, so make sure you get the right material for your designed cockpit.
( 1 )
$294.99
$265.49
On Sale
Building your protective race bubble begins with one of these Competition Engineering 8-point roll bar main hoops. Made from your choice of chromoly or mild steel, these strong one-piece hoops mount easily with minimal welding, reinforcing the cabin safety through increased rigidity. This type of modification is required on most racing circuits for improved driver protection. In order to install a complete roll cage, you'll also need the appropriate strut kit (sold separately)--or save time by simply ordering the complete roll bar hoop and strut assembly package. Match your vehicle to the support bars needed to ensure a secure cockpit design.
( 38 )
$279.99
—
$288.99
$251.99
—
$260.09
These Competition Engineering ladder bar crossmembers are designed to be strong mounting points for the front rod ends. They will fit most chassis, while acting as a ladder bar mount and rear driveshaft loop.
( 14 )
$119.99
—
$242.99
Competition Engineering seat back braces stem from the reality that in a fraction of a second, anything can happen while racing. By tying your seat into the sturdy roll cage, it'll stay in place under heavy acceleration, braking, cornering, and damaging situations. These braces use a 3 in. by 6 in. backing plate for attachment to the back of non FIA-approved seats; they can also be used on approved seats for added support. The braces feature a locking collar to allow the seat to move back and forth, and no welding is required for installation. A well-built roll cage is the safest part of a vehicle--keep your seat attached the frame with a Competition Engineering back brace kit.
( 23 )
$155.99
On Sale
High horsepower and torque leads to chassis flex. Competition Engineering roll cage struts defeat chassis flex and lessen your vehicle's reaction time by tying the front frame to the roll cage. These 1 5/8 in. by .134 in. wall mild steel tubing struts are mandrel-formed, meet NHRA and IHRA requirements, and are pre-notched for easy attachment to the roll cage. Welding is required. Competition Engineering roll cage struts secure the roll cage to the front of the frame--making for one tough, solid unit on the race track.
( 5 )
$114.99
$103.49
These Competition Engineering bolt-on conversion kits are designed to allow the bolt-on aluminum strut wheelie bar kit to be bolted on to any rear-end housing. They include all necessary mounting brackets and hardware for installation.
( 5 )
$124.99
Designed to eliminate side-to-side housing movement, these Competition Engineering Ultra Magnum Series diagonal links are superior to the panhard bar for eliminating sway in ladder bar and 4-link suspensions. They include left and right-hand threaded rod ends to allow for on-car adjustments and can be shortened to fit a narrow chassis. Ultra Magnum Series weld-on diagonal link kits by Competition Engineering help keep your rear axle housing centered in the chassis for straight tracking. Product features: * Constructed from chromoly steel tubing * 1.000 in. diameter x 0.065 in. wall thickness x 36.000 in. overall length * Kit includes weld-in tube adapters, mounting brackets with 1/2 in. holes, plus all rod ends and mounting hardware
Not Yet Reviewed
$134.99
Designed to stabilize ladder bar and 4-link suspensions, these Competition Engineering diagonal links connect the front mounting bracket of a ladder or 4-link to the rear housing mounting bracket on the opposite side. They include left and right-hand threaded rod ends to allow for on-car adjustments. These links can be trimmed to fit narrow rear-ends, and come complete with all of the necessary brackets and hardware.
( 17 )
$129.99
—
$228.99
Competition Engineering has developed these engine-limiting torque link kits for enthusiasts who want the benefits of a solid motor mount for racing, and the comfortable ride of a stock motor for street use. It all begins with the installation of two supplied zinc-plated brackets. One goes on the front of the driver side cylinder head, and the other on the sway bar mount on the frame. For racing use, the removable torque link can be installed with the supplied pins and clips, limiting engine movement. When the racing is over, simply remove the torque link, and you're ready for a smooth ride home. These kits include all hardware and instructions for a complete installation.
( 8 )
$103.99
Competition Engineering wishbone rear axle locators are designed to eliminate any sway in a ladder bar or 4-link system. They include 3/4 in. forged solid steel rod ends, steel or chromoly tubing, and installation brackets and hardware. The rear axle locators are available in both welded and un-welded versions, but will require welding for installation to the vehicle and rear-end housings.
( 5 )
$231.99
These Competition Engineering adjustable drag shocks offer a 3-way valving system to dial-in the extension/compression ratio needed for any track condition. The front shocks have three adjustable ratios of 90/10, 80/20, and 60/40. The ratios for the rear shocks are 70/30, 60/40, and 50/50. These numbers represent the percentage of force required to extend (first number) and compress (second number) the shock. By changing the settings on the front and rear shocks, you can dial-in the car to raise the front on initial launch for weight transfer, and then settle smoothly for a final charge to the finish line.
( 242 )
$120.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
