Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
OLDSMOBILE OMEGA Competition Engineering Parts and Accessories
Showing In Stock Items. Show All 14 Items.
Competition Engineering Adjustable Drag Shocks
These Competition Engineering adjustable drag shocks offer a 3-way valving system to dial-in the extension/compression ratio needed for any track condition. The front shocks have three adjustable ratios of 90/10, 80/20, and 60/40. The ratios for the rear shocks are 70/30, 60/40, and 50/50. These numbers represent the percentage of force required to extend (first number) and compress (second number) the shock. By changing the settings on the front and rear shocks, you can dial-in the car to raise the front on initial launch for weight transfer, and then settle smoothly for a final charge to the finish line.
( 243 )
$74.99
—
$75.99
Competition Engineering 10-Point Roll Bar Strut Kits
Wrap yourself in even more cabin protection, these Competition Engineering 10-point roll bar strut kits are the partner package for the 10-point roll bar main hoop kits. They include the two rear struts, two front door bars, ten 6 in. x 6 in. x 1/8th in. mounting pads, and 12 joint gussets. These combined with the main hoop kit give you the surrounding protection of a 10-point roll cage. This type of modification is required in most circuits of racing to provide increased cabin safety, while also improving the vehicles side impact protection. Best installed with the interior removed, they do require a mild amount of fabrication to properly fit to your vehicles application. Common installation steps may involve trimming length to fit your desired interior design, and welding is definitely involved. Working with the interior taken out also makes it much easier to get proper fitment, and assure proper welds are achieved. These strut kits will require the appropriate main hoop kits to complete the cage install. Both the main hoops and the strut kits are available in mild steel and chromoly, so make sure you get the right material for your designed cockpit.
( 3 )
$184.99
—
$437.99
Competition Engineering Bolt-On Frame Connectors
If you're going racing and have a hi-po engine in your unibody car, you might end up losing traction or twisting the body. What you need is extra support, and Competition Engineering subframe connectors give you that. Constructed of mild steel tubing, these connectors include all hardware and instructions.
( 161 )
$245.99
Competition Engineering Leaf Spring Traction Bar Kits
While the stock rear suspension in your ride may be adequate for stock engines and street tires, it just isn't going to cut it when you increase horsepower. What you need is Competition Engineering's leaf spring traction bars. Perfect for stock eliminator and bracket cars, they eliminate wheel hop and improve traction by applying the force that normally produces unwanted axle rotation into a downward force, making the tires stick to the pavement. They're constructed from heavy-gauge 2 1/2 x 1 1/2 x .120 in. wall steel tubing, and are fixture-welded to ensure a perfect fit for each application. Plus, they will handle up to 450 tire-shredding horsepower and include all materials required for installation.
( 24 )
$290.99
Competition Engineering Aluminum Spring Eye Bushings
Competition Engineering has developed these aluminum spring eye bushings to keep your leaf springs from moving around during a launch, like they would with the factory bushings. This simple improvement will give you quicker ETs by providing positive housing positioning, which allows for correct pinion angle and reduction of wheel hop.
( 1 )
$80.99
Competition Engineering Upper A-Arm Bushings
The stock upper control arm bushings found on most cars have serrations inside of the bushings to keep the arms from rotating freely. These serrations cause the bushings to twist and create friction that suppresses front-end lift and hinders weight transfer. By installing these Competition Engineering upper A-arm bushings, you eliminate the serrations. This allows the A-arm to pivot freely on the cross shaft, resulting in rapid front-end lift and increased weight transfer.
( 6 )
$84.99
Competition Engineering Solid Aluminum Body Mounts
Competition Engineering's solid aluminum body mounts are designed as direct replacements for the factory subframe body bushings on GM unibody cars. They eliminate the chassis flex and twisting that are common when these cars are used in competition. The mounts are CNC-machined from 6061-T6 aluminum for a perfect fit, and black anodized to resist corrosion. Instructions are included.
( 14 )
$84.99
Competition Engineering Weld-On Subframe Connectors
If you're going racing and have a hi-po engine in your unibody car, you might end up losing traction or twisting the body. What you need is extra support, and Competition Engineering's weld-on subframe connectors give you that. Constructed of mild steel tubing, they solidly connect your car's front and rear subframes.
( 14 )
$184.99
Competition Engineering 8-Point Roll Bar Main Hoop Kits
Building your protective race bubble begins with one of these Competition Engineering 8-point roll bar main hoops. Made from your choice of chromoly or mild steel, these strong one-piece hoops mount easily with minimal welding, reinforcing the cabin safety through increased rigidity. This type of modification is required on most racing circuits for improved driver protection. In order to install a complete roll cage, you'll also need the appropriate strut kit (sold separately)--or save time by simply ordering the complete roll bar hoop and strut assembly package. Match your vehicle to the support bars needed to ensure a secure cockpit design.
( 38 )
$279.99
Competition Engineering 12-Point Roll Bar Main Hoop Kits
Drag racers want their cars to be as safe as possible, and Competition Engineering 12-point roll bar main hoop kits offer superior strength and chassis rigidity for 360 degree driver protection. This design links the cage to the front frame, essentially making it one solid unit--you'll notice better control and vehicle reaction time. These packages furnish you with the main hoop, one top hoop, two front downstruts, one main hoop crossbrace, and two forward struts. This type of modification is required on most racing circuits for increased cabin safety and side impact security. The units require only minor modifications and welding for solid installation; they're tailored for specific types of cars, so check the applications for matching specs. Competition Engineering 12-pt roll bar main hoop kits require also ordering the appropriate strut kit if you desire a complete roll cage install. Both kits are available in mild steel and chromoly.
Not Yet Reviewed
$841.99
