Availability
The partner package for the 8-point roll bar main hoop kits, these Competition Engineering 8-point roll bar strut kits provide the support pieces to complete your safety cage. They include: two rear struts, two front door bars, main hoop cross brace, two diagonal hoop supports, six weld joint gussets, and eight 6.000 in. square x 0.134 in. (10 gauge) thick floor plates. Combining these parts with a main hoop kit gives you an 8-point roll cage—a modification required in most racing circuits for providing increased cabin safety and side impact protection. Both the main hoop and the strut kit are available in your choice of mild steel or chromoly. Complete your design of a secure cockpit with a Competition Engineering 8-point roll bar strut kit.
( 5 )
$290.99
—
$630.99
Competition Engineering seat back braces stem from the reality that in a fraction of a second, anything can happen while racing. By tying your seat into the sturdy roll cage, it'll stay in place under heavy acceleration, braking, cornering, and damaging situations. These braces use a 3 in. by 6 in. backing plate for attachment to the back of non FIA-approved seats; they can also be used on approved seats for added support. The braces feature a locking collar to allow the seat to move back and forth, and no welding is required for installation. A well-built roll cage is the safest part of a vehicle--keep your seat attached the frame with a Competition Engineering back brace kit.
( 23 )
$144.99
Competition Engineering funny car cage kits are crafted from aircraft-quality chromoly tubing. They're designed to upgrade your 10-point roll cage kit to have funny car cage protection. They are left long and un-notched so that they can be custom-fitted to your application and meet NHRA and IHRA requirements. If you need a kit to upgrade your kit from a 10-point or more roll cage to a funny car cage, Competition Engineering has you covered.
( 16 )
$213.99
—
$520.99
Wrap yourself in even more cabin protection, these Competition Engineering 10-point roll bar strut kits are the partner package for the 10-point roll bar main hoop kits. They include the two rear struts, two front door bars, ten 6 in. x 6 in. x 1/8th in. mounting pads, and 12 joint gussets. These combined with the main hoop kit give you the surrounding protection of a 10-point roll cage. This type of modification is required in most circuits of racing to provide increased cabin safety, while also improving the vehicles side impact protection. Best installed with the interior removed, they do require a mild amount of fabrication to properly fit to your vehicles application. Common installation steps may involve trimming length to fit your desired interior design, and welding is definitely involved. Working with the interior taken out also makes it much easier to get proper fitment, and assure proper welds are achieved. These strut kits will require the appropriate main hoop kits to complete the cage install. Both the main hoops and the strut kits are available in mild steel and chromoly, so make sure you get the right material for your designed cockpit.
( 3 )
$171.99
—
$408.99
Wrap yourself up in 10 points of protection, these Competition Engineering 10-Point roll bar main hoop kits give you that extra protection required when you truly get competitive and head out to the circuit races. These 10-point roll bar main hoop kits come with the main loop, one top loop, two front down struts, one main hoop crossbrace, and two diagonal hoop supports. This type of modification is required in most circuits of racing to provide increased cabin safety, while also improving the vehicles side impact protection. Best installed with the interior removed, they do require a mild amount of fabrication to properly fit to your vehicles application. Common installation steps may involve trimming length to fit your desired interior design, and welding definitely. Working with the interior out also makes it much easier to get proper fitment, and assure proper welds are achieved. These main hoop kits will require the appropriate strut kits to complete the cage install. These main hoop kits are available in mild steel and chromoly, so make sure you get the right material for your designed cockpit.
( 14 )
$316.99
—
$706.99
In the event of U-joint failure, Competition Engineering universal driveshaft loops will contain your driveshaft. Made of mandrel-formed 1.25 in. O.D. x .083 in. wall mild steel tubing, these kits offer a lightweight, weld-in alternative to bolt-on types. The driveshaft loop portion is a bolt-on design, for easy removal of the driveshaft.
( 24 )
$106.99
—
$181.99
Competition Engineering parachute release systems give you everything you need to pull your parachute correctly. They include an 18 ft. cable, an aluminum release lever, and the required mounting hardware. Just add the parachute, and you're on your way to rapid deceleration.
( 1 )
$143.99
These Competition Engineering swing-out door bar kits feature a release pin and hinge bracket to help you get in and out of your roll-bar equipped car easily--no more crawling over the bars to get in! They are made from 1 5/8 in. x .134 in. wall mild steel tubing. Check with your sanctioning body for regulations on using this setup.
( 39 )
$68.99
Building your protective race bubble begins with one of these Competition Engineering 8-point roll bar main hoops. Made from your choice of chromoly or mild steel, these strong one-piece hoops mount easily with minimal welding, reinforcing the cabin safety through increased rigidity. This type of modification is required on most racing circuits for improved driver protection. In order to install a complete roll cage, you'll also need the appropriate strut kit (sold separately)--or save time by simply ordering the complete roll bar hoop and strut assembly package. Match your vehicle to the support bars needed to ensure a secure cockpit design.
( 37 )
$88.99
—
$263.99
These Competition Engineering parachute pack mounts will allow you to position the parachute where you need to. They include a quick-release pin and tubing to mount the parachute. The mounts do require welding for installation.
( 6 )
$85.99
High horsepower and torque leads to chassis flex. Competition Engineering roll cage struts defeat chassis flex and lessen your vehicle's reaction time by tying the front frame to the roll cage. These 1 5/8 in. by .134 in. wall mild steel tubing struts are mandrel-formed, meet NHRA and IHRA requirements, and are pre-notched for easy attachment to the roll cage. Welding is required. Competition Engineering roll cage struts secure the roll cage to the front of the frame--making for one tough, solid unit on the race track.
( 5 )
$106.99
Competition Engineering 10-point complete roll cage kits are designed to strengthen your chassis without adding a lot of excess weight. These all-inclusive packages contain both the Main Hoop Kit and the Strut Kit, enabling you to begin a total roll bar and cage assembly with all components on-hand. The tubing is available in your choice of mild steel or aircraft-grade chromoly--all mandrel-formed by computer for consistent thickness. This type of cage is required on many race circuits, and Competition Engineering units are fully sanctioned by the NHRA and IHRA. Welding and minor car modifications may be necessary for a perfect fit. These kits are compatible with a wide variety of vehicles, including models from GM, Chrysler, Dodge, and Ford. Competition Engineering 10-point complete roll cage kits are your link between speed and safety. Here's a breakdown of what you'll receive: * 10-Point Roll Bar Main Hoop Kit, which includes the main hoop, top hoop, main hoop crossbrace, two diagonal hoop supports, and two front downstruts * 10-Point Roll Bar Strut Kit, which includes two rear struts, two door bars, weld joint gussets, and steel mounting pads (6 in. by 6 in. by 1/8 in thick) * Complete instructions for a hassle-free installation
( 21 )
$488.98
—
$1,176.99
Dragsters and hot rod racers attain speeds between 200 and 300 mph, so every safety precaution can spare you from serious injury or worse. Competition Engineering 8-point complete roll cage kits are designed to strengthen your chassis without adding a lot of excess weight. These all-inclusive packages contain both the Main Hoop Kit and the Strut Kit, enabling you to begin a total roll bar and cage assembly with all components on-hand. The tubing is available in your choice of mild steel or aircraft-grade chromoly--all mandrel-formed by computer for consistent thickness. This type of cage is required on many race circuits, and Competition Engineering units are fully sanctioned by the NHRA and IHRA. Welding and minor car modifications may be necessary for a perfect fit. These kits are compatible with a wide variety of vehicles, including sport compacts and models from AMC, Chrysler, Dodge, GM, and Ford. Competition Engineering 8-point complete roll cage kits are your link between speed and safety. Here's a breakdown of what you'll receive: * 8-Point Roll Bar Main Hoop Kit, which includes the main roll bar hoop * 8-Point Roll Bar Strut Kit, which includes a main hoop crossbrace, two front door bars, two rear struts, two diagonal hoop supports, six weld joint gussets, and eight 6 in. by 6 in. by 1/8 in. thick steel mounting plates * Complete instructions for a hassle-free installation
( 37 )
$379.98
—
$774.99
If you're going to be running 10.99 seconds or quicker in NHRA, you must have at least a 10-point roll cage. If you currently have an 8-point roll bar installed, one of Competition Engineering's 10-point roll bar conversion kits will upgrade your 8-point bar to a 10-point cage. These weld-in kits consist of a top hoop, which attaches to the front of the existing roll bar and follows the perimeter of the roof, plus two supports for the front of the top hoop. Both the top hoop and the supports are made from rugged, 1 5/8 in., 0.134 in. wall, computer mandrel-bent, mild-steel tubing. Even if you aren't required to have a 10-point cage, upgrading your existing 8-point bar will add protection, as well as chassis stiffness that can translate into better reaction times.
( 6 )
$205.99
—
$210.99
These Competition Engineering formed rear struts are designed to allow roll bar installation in most vehicles without permanently removing or modifying the rear seat. They are manufactured from 1 3/4 in. x .134 in. wall tubing with a 50 degree bend. The rear strut kits are NHRA and IHRA approved. Welding and fabrication are required to fit them into most vehicles.
( 5 )
$83.99
The safety features of Lexan and polycarbonate windshields are indisputable. Mounting one to your frame can sometimes be a challenge--unless you have the proper accessories. Competition Engineering windshield installation kits include the rubber gasket seal and 50 stainless steel screws with nuts. There are kits available for different windshield thicknesses.
( 3 )
$59.99
—
$63.99
Drag racers want their cars to be as safe as possible, and Competition Engineering 12-point roll bar main hoop kits offer superior strength and chassis rigidity for 360 degree driver protection. This design links the cage to the front frame, essentially making it one solid unit--you'll notice better control and vehicle reaction time. These packages furnish you with the main hoop, one top hoop, two front downstruts, one main hoop crossbrace, and two forward struts. This type of modification is required on most racing circuits for increased cabin safety and side impact security. The units require only minor modifications and welding for solid installation; they're tailored for specific types of cars, so check the applications for matching specs. Competition Engineering 12-pt roll bar main hoop kits require also ordering the appropriate strut kit if you desire a complete roll cage install. Both kits are available in mild steel and chromoly.
Not Yet Reviewed
$349.99
—
$789.99
When you want your ride to be as safe as possible, these Competition Engineering 12-point roll bar strut kits give you superior strength and driver protection with proper installation. These strut kits are the partner package for the 12-point roll bar main hoop kits. They include the two rear struts, two front door bars, two diagonal hoop supports, one rear X-brace, ten 6 in. x 6 in. x 1/8th in. mounting pads, and 12 weld joint gussets. These combined with the main hoop kit give you the surrounding protection of a 12-point roll cage. This type of modification is required in most circuits of racing to provide increased cabin safety, while also improving the vehicles side impact protection. Best installed with the interior removed, they do require a mild amount of fabrication to properly fit to your vehicles application. Common installation steps may involve trimming length to fit your desired interior design, and welding is definitely involved. Working with the interior taken out also makes it much easier to get proper fitment, and assure proper welds are achieved. These strut kits will require the appropriate main hoop kits to complete the cage install. Both the main hoops and the strut kits are available in mild steel and chromoly, so make sure you get the right material for your designed cockpit.
( 1 )
$274.99
—
$680.99
These Competition Engineering roll cage X-brace kits are designed to increase the strength of your chassis by eliminating side-to-side twist and uneven suspension loading. They are recommended for use with the formed rear struts for installation. The kits include one 60 in. long 1 5/8 in. x .134 in. wall tube and two 30 in. long 1 5/8 in. x .134 in. wall tubes. Welding is required to fit them into your vehicle.
Not Yet Reviewed
$77.99
Competition Engineering's bolt-in race harness mounting plates are designed to be installed on the outside of the floor pan or transmission tunnel to create a strong, reinforced point that an anti-submarine belt and/or lap belt can be bolted to. The mounting plates are made of thick 12-gauge steel and need to be welded in place and includes bolt and spacer to allow the harnesses bolt-in hardware to be raised off the floor or tunnel for proper belt positioning. Once a 1/2 in. diameter hole is drilled into the floor pan or tunnel for the anti-submarine belt and/or lap belt, the mounting plate is positioned so the plate's included hardware can be tightened. The harness mounting plate needs to be installed as per your sanctioning body rules.
Not Yet Reviewed
$32.99
Competition Engineering's snap-in race harness mounting plates create a strong, reinforced point that an anti-submarine belt and/or lap belt can be snapped to. Made from thick 12-gauge steel, these mounting plates are to be installed on the exterior side of the floor pan or transmission tunnel. Once a 1/2 in. diameter hole is drilled into the floor pan or tunnel for the anti-submarine belt and/or lap belt, the mounting plate is positioned so the plate's included hardware can be tightened. Mounting plates should be welded into place and include nut and eyelet that fit popular snap-in seatbelt racing harness applications. Please note: these race harness mounting plates need to be installed as per your sanctioning body rules.
( 1 )
$32.99
These Competition Engineering parachute anchor mounts weld to your chassis to hook up the strap from your parachute. They are manufactured from 1 5/8 in. diameter mild steel tubing and include the anchor strap bushing and bracket. The mounts require the use of the parachute pack system, also available from Competition Engineering.
( 3 )
$78.99
Competition Engineering's roll bar mounting plates are the same plates included in their 8-point roll bar, 10-point and 12-point roll cage kits. Based on customer requests, they are now available separately. The mounting plates are constructed of 10-gauge steel and offered in various quantities.
Not Yet Reviewed
$30.99
Competition Engineering roll bar fill plates are designed to fill roll bar tubing gaps around firewalls or rear parcel shelves. These slotted fill plates are also used to tie roll bar tubing into rockers and A/B pillars. Stamped from 18-gauge steel, the 5 in. x 10 in. roll bar fill plates are available in your choice of 1 5/8 in. or 1 3/4 in. diameters.
Not Yet Reviewed
$20.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
