Availability
In the event of U-joint failure, Competition Engineering universal driveshaft loops will contain your driveshaft. Made of mandrel-formed 1.25 in. O.D. x .083 in. wall mild steel tubing, these kits offer a lightweight, weld-in alternative to bolt-on types. The driveshaft loop portion is a bolt-on design, for easy removal of the driveshaft.
( 24 )
$106.99
These Competition Engineering parachute pack mounts will allow you to position the parachute where you need to. They include a quick-release pin and tubing to mount the parachute. The mounts do require welding for installation.
( 6 )
$85.99
On Sale
Building your protective race bubble begins with one of these Competition Engineering 8-point roll bar main hoops. Made from your choice of chromoly or mild steel, these strong one-piece hoops mount easily with minimal welding, reinforcing the cabin safety through increased rigidity. This type of modification is required on most racing circuits for improved driver protection. In order to install a complete roll cage, you'll also need the appropriate strut kit (sold separately)--or save time by simply ordering the complete roll bar hoop and strut assembly package. Match your vehicle to the support bars needed to ensure a secure cockpit design.
( 38 )
$88.99
$80.09
On Sale
These Competition Engineering swing-out door bar kits feature a release pin and hinge bracket to help you get in and out of your roll-bar equipped car easily--no more crawling over the bars to get in! They are made from 1 5/8 in. x .134 in. wall mild steel tubing. Check with your sanctioning body for regulations on using this setup.
( 39 )
$68.99
$62.09
On Sale
High horsepower and torque leads to chassis flex. Competition Engineering roll cage struts defeat chassis flex and lessen your vehicle's reaction time by tying the front frame to the roll cage. These 1 5/8 in. by .134 in. wall mild steel tubing struts are mandrel-formed, meet NHRA and IHRA requirements, and are pre-notched for easy attachment to the roll cage. Welding is required. Competition Engineering roll cage struts secure the roll cage to the front of the frame--making for one tough, solid unit on the race track.
( 5 )
$106.99
$96.29
The safety features of Lexan and polycarbonate windshields are indisputable. Mounting one to your frame can sometimes be a challenge--unless you have the proper accessories. Competition Engineering windshield installation kits include the rubber gasket seal and 50 stainless steel screws with nuts. There are kits available for different windshield thicknesses.
( 3 )
$59.99
—
$63.99
On Sale
These Competition Engineering formed rear struts are designed to allow roll bar installation in most vehicles without permanently removing or modifying the rear seat. They are manufactured from 1 3/4 in. x .134 in. wall tubing with a 50 degree bend. The rear strut kits are NHRA and IHRA approved. Welding and fabrication are required to fit them into most vehicles.
( 5 )
$83.99
$75.59
On Sale
These Competition Engineering roll cage X-brace kits are designed to increase the strength of your chassis by eliminating side-to-side twist and uneven suspension loading. They are recommended for use with the formed rear struts for installation. The kits include one 60 in. long 1 5/8 in. x .134 in. wall tube and two 30 in. long 1 5/8 in. x .134 in. wall tubes. Welding is required to fit them into your vehicle.
Not Yet Reviewed
$77.99
$70.19
These Competition Engineering parachute anchor mounts weld to your chassis to hook up the strap from your parachute. They are manufactured from 1 5/8 in. diameter mild steel tubing and include the anchor strap bushing and bracket. The mounts require the use of the parachute pack system, also available from Competition Engineering.
( 3 )
$78.99
Recommended for all vehicles, Competition Engineering's bolt-on driveshaft safety loops will contain the driveshaft in case of front U-joint failure, keeping it from contacting the track and possibly flipping the vehicle. They're made from 2 in. wide, 1/4 in. thick, CNC-formed steel with durable clear zinc plating. They bolt to the floor pan with four bolts per side and are stronger than brands using only two bolts per side.
( 3 )
$71.99
Competition Engineering U-bend mounts are a quick and easy way to fabricate a driveshaft loop, battery mount, or shifter mount. These U-bend mounts come complete with a weld tube for mounting and safety pins to make removal quick and easy.
( 2 )
$60.99
These Competition Engineering roll bar bolt-in conversion kits allow you to bolt in an 8-point roll cage kit without welding base plates to the floor. They use 1/8 in. thick, 6 in. x 6 in. steel plates, which are positioned under the floor to sandwich the existing roll bar plates together. The conversion kits include Grade 8 mounting bolts and hardware. Some drilling is required for installation.
Not Yet Reviewed
$59.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
