Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
Competition Engineering Adjustable Drag Shocks
These Competition Engineering adjustable drag shocks offer a 3-way valving system to dial-in the extension/compression ratio needed for any track condition. The front shocks have three adjustable ratios of 90/10, 80/20, and 60/40. The ratios for the rear shocks are 70/30, 60/40, and 50/50. These numbers represent the percentage of force required to extend (first number) and compress (second number) the shock. By changing the settings on the front and rear shocks, you can dial-in the car to raise the front on initial launch for weight transfer, and then settle smoothly for a final charge to the finish line.
( 242 )
$80.99
—
$94.99
Competition Engineering Slide-A-Link Traction Bars
The guys at Competition Engineering say these Slide-A-Link traction bars will cut half a tenth off of your 60 ft. times. The secret is their innovative telescoping design, which gives you two full inches of adjustability when setting pinion angle and spring preload. That gives you more control over front-end lift and weight transfer, so you can make quick, easy, on-car adjustments to track conditions. The bars come with special urethane bushings that store energy to prevent unloading between shifts, replacement lower axle mount pads, 1/2 in. U-bolts, aluminum front spring eye bushings, hardware, and complete instructions.
( 12 )
$629.99
—
$727.99
Competition Engineering Bump Steer Kits
Competition Engineering bump steer kits are designed for vehicles that have been raised or lowered and have unwanted toe changes and bump steer during suspension travel. These fully adjustable kits replace non-adjustable stock components with precision, aircraft-quality components that bolt into place with common hand tools. Made from a strong billet aluminum these kits are built to perform.
Not Yet Reviewed
$170.99
Competition Engineering Front Motor Plates
Keep your engine from twisting in the chassis! Competition Engineering front motor plates provide a solid connection between your engine and chassis, eliminating movement and helping to improve reaction times. These motor plates are made from 1/4 in. thick 6061-T6 aluminum and are computer-designed and machined. They're perfect for engine swaps or for setting the motor back in the chassis for increased weight transfer.
( 31 )
$196.99
—
$241.99
Competition Engineering Mid-Mount Plates
Competition Engineering mid-mount plates are designed to work with the aluminum front motor plates to further eliminate engine twist and prevent broken transmission cases in high-torque installations. Made from .188 in. thick 6061-T6 aluminum or .090 in. thick mild steel, they allow easy transmission swaps and help align the drivetrain for trouble-free operation. They include universal frame mounts and hardware.
( 24 )
$79.99
—
$259.99
Competition Engineering Formed Rear Frame Rails
Competition Engineering formed rear frame rails adds some beef to your suspension. The "chassis people" have designed and manufactured these to replace the stock sheet metal rear rails in your subframe equipped car. CE's rails are mandrel-formed 2 in. x 3 in. x .083 in. wall mild steel tube that will increase the chassis strength for quicker vehicle reaction times. Plus, they have been engineered to move the leaf springs and frame rails inboard to provide additional tire clearance. Strengthen your suspension to put more power to the pavement utilizing a pair of Competition Engineering formed rear frame rails. Additional information: * Designed to fit stock floor contours with minor fabrication * Requires use of a fuel cell, rear fenderwells and an upper shock crossmember * Use with Competition Engineering weld-in subframe connectors * Two rails and hardware per kit
( 16 )
$431.99
Competition Engineering Leaf Spring Traction Bar Kits
While the stock rear suspension in your ride may be adequate for stock engines and street tires, it just isn't going to cut it when you increase horsepower. What you need is Competition Engineering's leaf spring traction bars. Perfect for stock eliminator and bracket cars, they eliminate wheel hop and improve traction by applying the force that normally produces unwanted axle rotation into a downward force, making the tires stick to the pavement. They're constructed from heavy-gauge 2 1/2 x 1 1/2 x .120 in. wall steel tubing, and are fixture-welded to ensure a perfect fit for each application. Plus, they will handle up to 450 tire-shredding horsepower and include all materials required for installation.
( 24 )
$314.99
—
$327.99
Summit Racing™ Front Coil Spring and Drag Shock Pro Packs
These Summit Racing™ front coil spring and drag shock Pro Packs will help you get those consistent ETs that you need at the track. They include a set of front coil springs that are available in different spring rates for different vehicle weights. Plus, you get a set of front and rear adjustable drag shocks, so you can choose the valving that is best for your specific application. Quicker, more reliable starting line launches are here--pick up one of these Summit Racing™ front coil spring and drag shock Pro Packs to get the job done.
( 1 )
$523.43
—
$580.95
Competition Engineering Solid Aluminum Body Mounts
Competition Engineering's solid aluminum body mounts are designed as direct replacements for the factory subframe body bushings on GM unibody cars. They eliminate the chassis flex and twisting that are common when these cars are used in competition. The mounts are CNC-machined from 6061-T6 aluminum for a perfect fit, and black anodized to resist corrosion. Instructions are included.
( 14 )
$90.99
Competition Engineering Rear Shock Crossmembers
Competition Engineering rear shock crossmembers provide a stronger mounting point for your shock absorbers on the inboard of the frame. Built to handle the stress of racing, they are made of 2 in. x 1 1/2 in. x .083 in. wall steel. As an added benefit, they will also strengthen the rear subframe.
( 9 )
$200.99
Competition Engineering Bolt-On Frame Connectors
If you're going racing and have a hi-po engine in your unibody car, you might end up losing traction or twisting the body. What you need is extra support, and Competition Engineering subframe connectors give you that. Constructed of mild steel tubing, these connectors include all hardware and instructions.
( 161 )
$245.99
—
$250.99
Competition Engineering Upper A-Arm Bushings
The stock upper control arm bushings found on most cars have serrations inside of the bushings to keep the arms from rotating freely. These serrations cause the bushings to twist and create friction that suppresses front-end lift and hinders weight transfer. By installing these Competition Engineering upper A-arm bushings, you eliminate the serrations. This allows the A-arm to pivot freely on the cross shaft, resulting in rapid front-end lift and increased weight transfer.
( 6 )
$90.99
Competition Engineering Torque Link Kits
Competition Engineering has developed these engine-limiting torque link kits for enthusiasts who want the benefits of a solid motor mount for racing, and the comfortable ride of a stock motor for street use. It all begins with the installation of two supplied zinc-plated brackets. One goes on the front of the driver side cylinder head, and the other on the sway bar mount on the frame. For racing use, the removable torque link can be installed with the supplied pins and clips, limiting engine movement. When the racing is over, simply remove the torque link, and you're ready for a smooth ride home. These kits include all hardware and instructions for a complete installation.
( 8 )
$103.99
Competition Engineering Weld-On Subframe Connectors
If you're going racing and have a hi-po engine in your unibody car, you might end up losing traction or twisting the body. What you need is extra support, and Competition Engineering's weld-on subframe connectors give you that. Constructed of mild steel tubing, they solidly connect your car's front and rear subframes.
( 14 )
$177.99
—
$184.99
Competition Engineering Aluminum Spring Eye Bushings
Competition Engineering has developed these aluminum spring eye bushings to keep your leaf springs from moving around during a launch, like they would with the factory bushings. This simple improvement will give you quicker ETs by providing positive housing positioning, which allows for correct pinion angle and reduction of wheel hop.
( 1 )
$80.99
Summit Racing™ Frame Rail and Subframe Connector Pro Packs
These Summit Racing™ frame rail and subframe connector Pro Packs will help to firm up your rear suspension for optimum traction control. They include a set of 2 in. x 3 in. steel formed rear frame rails and a set of weld-on subframe connectors. Put the maximum horsepower to the ground with one of these Summit Racing™ frame rail and subframe connector Pro Packs.
( 2 )
$616.98
Competition Engineering Torque Box Reinforcing Plates
Looking to stiffen up your ride? Competition Engineering has you covered with their torque box reinforcement plates. They weld in place of your old lower control arm mounts, and provide a stronger mount so you can plant more power to the pavement.
( 2 )
$41.99
Competition Engineering Transmission Crossmember Bushings
These solid aluminum crossmember bushings from Competition Engineering act as chassis-stiffening devices, helping to increase ET consistency. They replace the rubber in a factory crossmember, with no modifications or welding required.
( 1 )
$45.99
Competition Engineering Magnum Series Lower Control Arm Kits
These Magnum series lower control arm kits from Competition Engineering offer reduced weight with increased strength. They feature an adjustable length for squaring axles to chassis, and spherical rod ends for precise axle control while eliminating suspension bind. They're perfect for drag racing or road racing, and their rear-end brackets allow 3-way adjustment for improved performance. These control arms offer bolt-in installation, and include all hardware.
Not Yet Reviewed
$398.99
Competition Engineering Rear Control Arm Spherical Bearing Kits
Competition Engineering rear control arm spherical bearing-bushing kits are constructed from billet aluminum, with a steel spherical bearing-type insert for the rear upper control arm. These kits eliminate flex and binding, improve handling, and provide positive location of the rear axle housing.
( 1 )
$237.99
