Availability
These Competition Engineering ladder bar crossmembers are designed to be strong mounting points for the front rod ends. They will fit most chassis, while acting as a ladder bar mount and rear driveshaft loop.
( 14 )
$119.99
If you're going racing and have a hi-po engine in your unibody car, you might end up losing traction or twisting the body. What you need is extra support, and Competition Engineering subframe connectors give you that. Constructed of mild steel tubing, these connectors include all hardware and instructions.
( 160 )
$245.99
—
$535.99
These universal transmission crossmembers from Competition Engineering make transmission installation and removal quick and easy. They include a 1 5/8 in. x .134 in. wall tube, four flat mounting tabs, and four concave mounting tabs with all hardware. Welding is required.
( 16 )
$101.99
—
$119.99
Competition Engineering formed rear frame rails adds some beef to your suspension. The "chassis people" have designed and manufactured these to replace the stock sheet metal rear rails in your subframe equipped car. CE's rails are mandrel-formed 2 in. x 3 in. x .083 in. wall mild steel tube that will increase the chassis strength for quicker vehicle reaction times. Plus, they have been engineered to move the leaf springs and frame rails inboard to provide additional tire clearance. Strengthen your suspension to put more power to the pavement utilizing a pair of Competition Engineering formed rear frame rails. Additional information: * Designed to fit stock floor contours with minor fabrication * Requires use of a fuel cell, rear fenderwells and an upper shock crossmember * Use with Competition Engineering weld-in subframe connectors * Two rails and hardware per kit
( 16 )
$388.99
—
$461.99
These Summit Racing™ frame rail and subframe connector Pro Packs will help to firm up your rear suspension for optimum traction control. They include a set of 2 in. x 3 in. steel formed rear frame rails and a set of weld-on subframe connectors. Put the maximum horsepower to the ground with one of these Summit Racing™ frame rail and subframe connector Pro Packs.
( 2 )
$601.98
—
$616.98
If you're going racing and have a hi-po engine in your unibody car, you might end up losing traction or twisting the body. What you need is extra support, and Competition Engineering's weld-on subframe connectors give you that. Constructed of mild steel tubing, they solidly connect your car's front and rear subframes.
( 14 )
$171.99
—
$184.99
Competition Engineering offers several different types of brackets and tabs to help make it easier for you to mount and install accessories to your chassis. These brackets and tabs enable you to replace bent and damaged brackets, or update your chassis setup.
( 21 )
$21.99
—
$60.99
These Competition Engineering steel fenderwells are beaded at the seams to give them extra strength, and are made of 24-gauge steel. These fenderwells allow for plenty of clearance, even on 15 and 16 in. Pro Stock tires.
( 13 )
$153.99
—
$176.99
These Competition Engineering universal frame rails provide the perfect foundation for just about any race suspension. Available for 4-link and ladder bar suspensions, these mandrel-bent rails provide solid mounting for your suspension and rear axle components, while allowing you to run a low ride height or taller race tires.
( 7 )
$417.99
—
$499.99
Competition Engineering offers these Magnum series 4-link brackets to enable you to replace bent or damaged brackets when updating your rear-end housing. Designed for use on 3 in. diameter axle tubes, these brackets feature a radiused profile that simplifies welding and saves hours of fabrication time. The rugged steel construction eliminates bending in ultra high-horsepower cars, and the entire profile is stamped from hot rolled steel in one operation, to eliminate distortion and ensure exact dimensions.
Not Yet Reviewed
$50.99
These Competition Engineering aluminum fenderwells are beaded at the seams to give them extra strength, and are made of 0.032 in. aluminum. These fenderwells allow for plenty of clearance, even on 15 and 16 in. Pro Stock tires.
Not Yet Reviewed
$206.99
—
$363.99
Competition Engineering parachute release cable clamps feature a bracket manufactured from 1/8 in. thick aluminum with a steel clamp and mounting hardware. Designed to work with Moroso parachute mounts, they can be used with other mounts as well. Plus, they comply with NHRA general regulations requiring clamps to be within 12 in. of the parachute pack edge. Going fast is great, but being able to stop is even better! Trust your parachute to the maximum performance people at Competition Engineering and their release cable clamps.
Not Yet Reviewed
$40.99
Competition Engineering roll bar gussets provide additional strength to welded tube joints. They're offered in either lightweight 1/8 in. mild steel or 4130 chromoly, and welding is required. These versatile triangular brackets are sold in sets of 25.
( 1 )
$33.99
Competition Engineering's roll bar mounting plates are the same plates included in their 8-point roll bar, 10-point and 12-point roll cage kits. Based on customer requests, they are now available separately. The mounting plates are constructed of 10-gauge steel and offered in various quantities.
Not Yet Reviewed
$12.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
