49 Results Found For "valve stems"

COMP Cams’ highly-trained engineering staff uses some of the most sophisticated manufacturing and test equipment in the industry to design camshafts that make more horsepower...

COMP Cams’ highly-trained engineering staff uses some of the most sophisticated manufacturing and test equipment in the industry to design camshafts that make more horsepower than any other cam on the market. COMP Cams manufactures hydraulic and solid flat tappet cams, hydraulic and mechanical roller cams, and overhead cams for everything from OE replacement to full race, naturally aspirated, supercharged, turbocharged, or nitrous injected engines. For the ultimate in race-winning reliability, upgrade to COMP Cams’ competition-grade lifters, springs, timing sets, and gear sets—every part incorporates the same race-winning...

Showing In Stock Items. Show All 68 Items.

Individual Parts

Part Groups

Results 1 - 24 of 49

COMP Cams Valve Seals

COMP Cams offers a complete line of valve seals, from the stock GM O-rings to the positive-stop PTFE seals. They are a must to keep unwanted oil from entering the combustion chamber through the clearance in the valve guides. The O-ring seals use the standard retainer and oil splash shield. The umbrella seals are normally used when a larger-than-stock diameter spring is used. In the case of a double spring, the positive stop PTFE seals are used. For triple-spring applications, use the smaller-diameter Viton® seals.

4.31 out of 5 stars ( 198 )

$6.95

—

$56.95

COMP Cams Valve Seal Installation Tools

These COMP Cams valve seal installation tools are made from CNC-machined aluminum and are black powdercoated for protection. They will install PTFE valve seals on any .500 or .531 in. valve guide without seal distortion or gouging.

4.12 out of 5 stars ( 17 )

$43.95

COMP Cams Street Valve Locks

COMP Cams Street valve locks are stock replacement for stock engine rebuilds. They're stamped and hardened for superior wear resistance. Use these steel valve locks for street applications with standard valve spring loads. They're available in a variety of sizes, styles, and quantities.

4.84 out of 5 stars ( 45 )

$6.95

—

$200.95

COMP Cams Super Valve Locks

COMP Cams Super valve locks are wider-angled 10 degree locks. They distribute the ever-increasing valve spring loads over the retainer better than typical 7 degree locks by reducing the chance of "pull-through" failure. They are precision-machined for accuracy and are available for many popular valve sizes with or without a lash cap recess. Super valve locks will fit any COMP Cams 10 degree retainer and are recommended for all race applications due to their superior strength.

4.61 out of 5 stars ( 130 )

$7.95

—

$277.95

COMP Cams Sportsman Stainless Steel Valves

Featuring precision tolerances and superior final machining, COMP Cams Sportsman stainless steel valves offer outstanding performance and durability for high-rpm, high-horsepower engines. They are manufactured from 21-4N high-strength, one-piece stainless steel. They also feature a chrome polished stem, hardened tips, and high-flow underhead for minimum flow restriction. Recommended for hydraulic, mechanical, or roller lifter camshaft cylinder heads, COMP Cams Sportsman stainless steel valves provide you with the reliability and performance that you require.

3.71 out of 5 stars ( 7 )

$18.95

—

$1,766.95

COMP Cams Race Valve Locks

COMP Cams race locks are designed for stock or performance engines using 7 degree valve locks. They are manufactured from machined steel and offer excellent valve spring location, so it is not necessary to change to a 10 degree retainer. Whether you're rebuilding a stock engine or changing to valve springs that have more seat pressure, COMP Cams Race valve locks will provide the reliability that you've been looking for.

4.53 out of 5 stars ( 30 )

$6.95

—

$249.95

COMP Cams Titanium 8 Degree Valve Locks

COMP Cams titanium 8 degree valve locks are designed for engines needed lightweight, durable valve locks. They are manufactured from titanium and offer superior valve spring location. The COMP Cams titanium 8 degree valve locks will require specific retainers and will not fit standard 7 or 10 degree retainers. Give your valvetrain an upgrade with these COMP Cams titanium 8 degree valve locks.

Not Yet Reviewed

$26.95

—

$277.95

COMP Cams Tool Steel Valve Spring Retainers

COMP Cams tool steel valve spring retainers are lightweight, high-strength, and have excellent wear characteristics. They're 30 percent stronger than conventional chromoly steel retainers and can withstand even the most demanding engine rpm ranges. Manufactured from high-grade tool steel, COMP Cams tool steel valve spring retainers are the right components to instantly add reliability to your valvetrain.

5.0 out of 5 stars ( 2 )

$24.95

—

$475.95

COMP Cams Steel Valve Spring Retainers

New valve springs with larger diameters require new retainers to handle the higher pressures developed by the springs. COMP Cams valve spring retainers are the solution. Precision-machined, these retainers are specifically designed for positive location when combined with COMP Cams' valve springs. They're available for single, double and triple-spring applications.

4.64 out of 5 stars ( 168 )

$11.95

—

$429.95

COMP Cams Titanium Valve Spring Retainers

Ideal for serious racers, COMP Cams titanium valve spring retainers are stronger and lighter than steel. They're available in a wide range of sizes, styles, and quantities. The retainers work best with COMJP Cams valve locks and optional lash caps. Order the set best suited for your single, dual, or triple spring application.

4.9 out of 5 stars ( 10 )

$32.95

—

$724.95

COMP Cams Spring Seat Cutters

Cut your own valve spring seats with these COMP Cams spring seat cutters. These seat cutters are made from tough carbide, so they can cut seat after seat without wearing out. They are available in a variety of configurations and sizes to precisely cut seats for various spring sizes, designs, and even aftermarket valve seats. Each tool utilizes interchangeable arbors to match your valve stem to keep everything square and true. Save time and money by cutting your own valve spring seats with these COMP Cams spring seat cutters.

Not Yet Reviewed

$155.95

COMP Cams High Performance Valve Spring Kits

Simplify your valvetrain assembly! COMP Cams high performance valve spring kits have everything that you need for a complete valve spring assembly. Springs and retainers are included, along with complete instructions for a worry-free installation.

4.68 out of 5 stars ( 34 )

$145.95

—

$1,311.95

COMP Cams Valve Springs

Valve springs are one of the most critical and overlooked components in your engine. They must be matched to your cam in order for the engine to reach its full potential. It does absolutely no good to install a cam that will perform up to 8,000 rpm if you do not have the correct springs. Use the only valve springs that will give the recommended spring pressure with the valve both on the seat and at maximum lift. COMP Cams valve springs are offered in single and dual styles to meet your cam requirements.

4.64 out of 5 stars ( 225 )

$550.95

—

$823.95

COMP Cams Valve Lash Caps

In today's higher rpm engines, the tip of the valve stem is subjected to a tremendous pounding. The best solution to this problem is COMP Cams' lash caps. These hardened lash caps are precision-machined and ground perfectly flat, to maintain accurate valvetrain adjustment.

4.58 out of 5 stars ( 33 )

$8.95

—

$80.95

COMP Cams Conical Valve Spring Kits

These cone-shaped springs from COMP Cams are for high performance street applications where the heads are not removed and machined for larger springs. The springs will work without any modifications. The kits also include retainers, locks, and seals.

Not Yet Reviewed

$604.95

COMP Cams Valve Spring Seat Cutting Tools

COMP Cams valve spring seat-cutting tools allow you to machine the cylinder head for the correct diameter valve spring. This will allow you to install larger springs and hardened spring seats. They will require the use of an arbor/pilot (sold separately).

4.89 out of 5 stars ( 36 )

$130.95

COMP Cams Magnum Roller Tip Rocker Arms

One way to increase power is to increase lift. That's what makes COMP Cams Magnum roller tip rocker arms so popular. They're one of the highest lift rockers you can get outside of racing. And, along with the lift, you also get a ball pivot roller tip to prevent valve stem and guide wear.

4.58 out of 5 stars ( 291 )

$20.95

—

$240.95

COMP Cams Ultra Pro Magnum Rocker Arms

Utilizing years of valvetrain design experience, the latest FEA stress analysis technology, and an exhaustive testing regiment (dyno and Spintron), COMP Cams engineering team left no detail to chance. Everything from casting techniques to valve spring clearance was scrutinized to ensure that Ultra Pro Magnum rocker arms not only lived up to the lofty standards of their predecessor, but also took stud mount rocker performance, stability, and value to a whole new level. The most noticeable advancement centers around their nearly unbreakable investment cast 8650 chromoly body. The arched, web-like design delivers a nearly 29 percent increase in strength and rigidity, while reducing the moment of inertia and optimizing the dynamic balance. The resulting rockers maximize lift and valvetrain control at high rpm. The increased retainer and valve spring clearances of the new design enable the use of large-diameter valve springs, retainers, and locks, without clearance or fitment issues. The new black oxide exterior finish offers a distinctive appearance, along with long-term corrosion resistance. The COMP Cams Ultra Pro Magnum rocker arms feature an oversized trunnion and precision-sorted needle bearings designed for use with high-load valve springs. These unique rockers also feature hardened roller tips for reduced friction and elimination of the valve stem "side loading" that causes premature valve guide wear.

4.75 out of 5 stars ( 209 )

$45.95

—

$622.95

COMP Cams HRT Max Power Camshaft Kits

COMP Cams HRT Max Power camshaft kits take the guesswork out of choosing the right valvetrain-upgrade package to achieve your desired performance with your Dodge Gen III Hemi. These Max Power kits feature the "low shock technology" of COMP's HRT camshafts with lobe profiles designed to maximize horsepower and improve stability at higher rpms. The profiles are also easier on valve springs, enhancing durability and reducing load loss. By dyno testing with many combinations of valvetrain components, COMP Cams' engineers have created perfectly matched engine camshaft packages for your Hemi application in three different stages of performance. COMP HRT Max Power CK-kits include: * HRT Cam * Pushrods * Conical or Beehive springs * Steel retainers * Locks * Spring seats * Valve seals * Phase limiter (VVT Hemi kits only)

Not Yet Reviewed

$1,363.95

—

$1,408.95

COMP Cams Thumpr Hydraulic Flat Tappet Cam and Lifter Kits

COMP Cams is bringing the muscle car sound back, and it's nastier than ever! Let's face it--few things serve to grab our attention at a car show or cruise night more than a car with a thumping, high performance idle. In an ongoing quest to provide you with the performance and sound you demand, COMP Cams engineering team proudly introduces the Thumpr Series cam and lifter kits. The lobe profile and grind characteristics of these Thumpr camshafts use a combination of an early exhaust valve opening, a long exhaust duration, and a generous amount of intake and exhaust overlap to maximize the rough-idling characteristics of the cams. This gives you a seriously aggressive exhaust note without negatively impacting the power output or streetability of the engine. Thumpr camshafts are available in different grind profiles; each one will produce a rough, racy exhaust note and impressive amounts of horsepower and torque within a different rpm range. Thumpr Series cam and lifter kits deliver a substantial power increase over an identical hydraulic flat tappet grind without sacrificing reliability or ease of maintenance.

4.38 out of 5 stars ( 217 )

$587.95

—

$747.95

COMP Cams Thumpr LS Master Camshaft Packages

COMP Cams Thumpr LS Master camshaft packages come as a complete valvetrain parts package that is matched for specific LS applications and desired performance. COMP Cams engineers have spent countless hours testing and creating valve train component combinations that are perfectly matched for maximum horsepower and dependability, as well as creating that wildly popular Thumpr sound in GM LS applications. These packages can add anywhere from 60 to 110 hp (depending on the application). COMP Cams Thumpr LS Master camshaft packages include: * Thumpr LS camshaft * Lifters * Timing gear set * Pushrods * Valve springs * Retainers * Valve locks * Spring seats * Valve seats

4.0 out of 5 stars ( 8 )

$1,288.95

COMP Cams Stage 1 LST Master Camshaft Packages

COMP Cams Stage 1 LST Master camshaft packages for GM LS applications take the guesswork out of choosing the right valve train upgrade package for your specific engine and desired performance. The "Low Shock Technology" behind COMP Cams LST camshaft packages features lobe profiles designed to maximize horsepower, while improving stability at higher rpm. These profiles are also easier on the valve springs, enhancing durability and reducing load loss. By Spintron and dyno testing these new profiles with many combinations of valve train components, COMP Cams engineers have created valve train packages that are perfectly matched for maximum horsepower and dependability in all popular LS applications with varying modifications. Stage 1 LST kits commonly add 60+ hp, depending on application. Stage 1 LST Master camshaft packages include: * COMP Cams LST Camshaft * Lifters * Timing Gear Seat or Phaser Limiter (Depending on application) * Pushrods * Valve Springs * Retainers * Valve Locks * Spring Seats * Valve Seals

4.0 out of 5 stars ( 1 )

$1,784.95

COMP Cams Stage 2 LST Master Camshaft Packages

COMP Cams Stage 2 LST Master camshaft packages for GM LS applications take the guesswork out of choosing the right valve train upgrade package for your specific engine and desired performance. The "Low Shock Technology" behind COMP Cams LST camshaft packages features lobe profiles designed to maximize horsepower, while improving stability at higher rpm. These profiles are also easier on the valve springs, enhancing durability and reducing load loss. By Spintron and dyno testing these new profiles with many combinations of valve train components, COMP Cams engineers have created valve train packages that are perfectly matched for maximum horsepower and dependability in all popular LS applications with varying modifications. Stage 2 LST kits commonly add 90+ hp, depending on application. Stage 2 LST Master camshaft packages include: * COMP Cams LST camshaft * Lifters * Timing gear set or phaser limiter (depending on application) * Pushrods * Valve springs * Retainers * Valve locks * Spring seats * Valve seats

5.0 out of 5 stars ( 1 )

$1,504.95

—

$1,784.95

COMP Cams LST Stage 2 Blower Camshaft Packages

COMP Cams LST Stage 2 blower camshaft packages offer billet steel construction and Low Shock Technology making them the perfect upgrade for GM LS engines with larger displacement or larger blower applications that include more serious additional modifications for higher rpm and more power. Available in either a Cam Kit (CK) or Master Kit (MK) that includes lifters and timing set, both are Spintron and dyno-tested. Features: * LST Low Shock Technology cam lobe profiles for increased horsepower and improved stability at higher rpm * Spintron and dyno-tested to ensure maximum power, boost response, and reliability * Packages include: Hydraulic roller camshaft, pushrods, dual valve springs, tool steel retainers, valve locks, spring seats, and valve seals

Not Yet Reviewed

$1,839.95

Page 1 of 3
Next