39 Results Found For "ratio"

COMP Cams’ highly-trained engineering staff uses some of the most sophisticated manufacturing and test equipment in the industry to design camshafts that make more horsepower...

COMP Cams’ highly-trained engineering staff uses some of the most sophisticated manufacturing and test equipment in the industry to design camshafts that make more horsepower than any other cam on the market. COMP Cams manufactures hydraulic and solid flat tappet cams, hydraulic and mechanical roller cams, and overhead cams for everything from OE replacement to full race, naturally aspirated, supercharged, turbocharged, or nitrous injected engines. For the ultimate in race-winning reliability, upgrade to COMP Cams’ competition-grade lifters, springs, timing sets, and gear sets—every part incorporates the same race-winning...

Showing In Stock Items. Show All 46 Items.

Individual Parts

Part Groups

Results 1 - 24 of 39

COMP Cams Ultra Pro Magnum Rocker Arms

Utilizing years of valvetrain design experience, the latest FEA stress analysis technology, and an exhaustive testing regiment (dyno and Spintron), COMP Cams engineering team left no detail to chance. Everything from casting techniques to valve spring clearance was scrutinized to ensure that Ultra Pro Magnum rocker arms not only lived up to the lofty standards of their predecessor, but also took stud mount rocker performance, stability, and value to a whole new level. The most noticeable advancement centers around their nearly unbreakable investment cast 8650 chromoly body. The arched, web-like design delivers a nearly 29 percent increase in strength and rigidity, while reducing the moment of inertia and optimizing the dynamic balance. The resulting rockers maximize lift and valvetrain control at high rpm. The increased retainer and valve spring clearances of the new design enable the use of large-diameter valve springs, retainers, and locks, without clearance or fitment issues. The new black oxide exterior finish offers a distinctive appearance, along with long-term corrosion resistance. The COMP Cams Ultra Pro Magnum rocker arms feature an oversized trunnion and precision-sorted needle bearings designed for use with high-load valve springs. These unique rockers also feature hardened roller tips for reduced friction and elimination of the valve stem "side loading" that causes premature valve guide wear.

4.77 out of 5 stars ( 206 )

$45.95

—

$622.95

COMP Cams Ultra Pro Magnum XD Roller Rocker Arms

Built to outlast and outperform in accuracy and strength, Ultra Pro Magnum XD roller rocker arms are engineered from durable 8650 steel and include a machined billet pushrod seat insert for a wide range of super accurate ratios. A unique and wide ratio range to fit almost any popular application from 1.5 to 1.8 in 0.5 in. increments for Chevy and 1.6 to 1.73 for various Ford applications is available. These Ultra Pro Magnum XD rockers are fully rebuildable and boast precision-sorted needle bearings and hardened roller tips. And, they work with most diameter springs and retainers. The XD design utilizes advanced FEA and CAD design and development to improve strength, stiffness and MOI (moment of inertia) optimization for drag and circle track applications.

4.58 out of 5 stars ( 60 )

$55.95

—

$649.95

COMP Cams Magnum Roller Tip Rocker Arms

One way to increase power is to increase lift. That's what makes COMP Cams Magnum roller tip rocker arms so popular. They're one of the highest lift rockers you can get outside of racing. And, along with the lift, you also get a ball pivot roller tip to prevent valve stem and guide wear.

4.58 out of 5 stars ( 290 )

$20.95

—

$240.95

COMP Cams Ultra Gold ARC Series Aluminum Rocker Arms

Designed specifically for high performance street and race engines, COMP Cams Ultra Gold ARC Series aluminum rocker arms are precision CNC-machined to strict tolerances. They incorporate modern technology and design features to create the most advanced aluminum rocker arms available. Proven to withstand extremely aggressive spring pressure, the COMP Cams Ultra Gold ARC Series aluminum rocker arms use their CNC-machined aluminum design for high quality and the ultimate in ratio accuracy.

4.63 out of 5 stars ( 114 )

$41.95

—

$1,626.95

COMP Cams High Energy Diecast Aluminum Rocker Arms

Finally, you can get high performance without a high price with COMP Cams High Energy diecast aluminum rocker arms. COMP Cams is a leader in valvetrain technology and has developed these High Energy rockers to provide a superior strength to weight ratio to withstand the hardships of your street performance and mild race engines, while adding valve lift. These diecast aluminum, larger-than-stock rocker bodies are designed to be stiffer and more durable. They feature needle-bearing fulcrums and roller tips to reduce friction and lower oil temperatures for even more horsepower potential. Maybe you're on a budget, or maybe you just appreciate getting the most for your coin; make an affordable choice without sacrificing performance--get COMP Cams High Energy diecast aluminum rocker arms.

4.52 out of 5 stars ( 223 )

$24.95

—

$270.95

COMP Cams Pro Magnum Shaft Mount Roller Rocker Arms

COMP Cams Pro Magnum shaft mount roller rocker arms combine the strength of 8650 chromoly steel and the weight savings of aluminum rockers. COMP Cams took advantage of computer design to simulate the stresses that affect rockers under various operating loads. This allowed the engineers to lessen the rockers' mass at non-critical areas and strengthen the areas that take the most punishment. The results are rocker arms that are strong where they need to be and actually weigh 5 percent less at the valve than comparable aluminum rockers.

4.58 out of 5 stars ( 31 )

$79.95

—

$948.95

COMP Cams Max-Lift BSR Shaft Rocker Systems

COMP Cams introduces another industry first with their Max-Lift BSR shaft rocker systems, a bolt-in bushed shaft rocker system that increases valve train stiffness helping your engine achieve higher levels of performance. By tying all eight rocker arms together on a single shaft that fits in the stock rocker stand, COMP Cams has found a way to improve valve train dynamics, increase valve train stiffness and reduce deflection under extreme loads. The increased valve train stiffness created the BSR rocker system allows your existing cam to act like a larger camshaft by transferring more of the motion to the valve or the use of more aggressive, higher lift cams without losing control of the valve train. Take complete control of your valves with the COMP Cams Max-Lift BSR shaft rocker system.

4.2 out of 5 stars ( 5 )

$774.95

—

$883.95

COMP Cams Trunnion-Upgraded OEM Rocker Arms for GM LS

Add some punch to your Chevy LS1 engine—install a set of GM LS trunnion-upgraded OEM rocker arms from COMP Cams, the absolute leader in valvetrain technology! These upgraded rocker arms feature a stronger, more durable trunnion and captured bearing design to eliminate cageless needle bearing failure in stock LS rocker arms when loads are increased. Choose the COMP Cams rocker arm application (ratio) that will best fit your goals. Additional features include: * High-quality steel body * Black oxide finish for long-term durability * Increases lift capacity * Utilizes caged roller bearings * Trunnions are secured by snap rings * Meets or exceeds OEM specifications

Not Yet Reviewed

$37.95

—

$627.95

COMP Cams Magnum Rocker Arm and High Energy Pushrod Kits

COMP Cams Magnum rocker arm and high energy pushrod kits are convenient packages that take the guess work out of choosing perfectly match performance components. If you want to experience a world of difference with your rocker arms and pushrods, then you need a set of these COMP Cams Magnum rocker arm and high energy pushrod kits.

4.01 out of 5 stars ( 85 )

$222.95

—

$376.95

COMP Cams Pro Magnum Roller Rocker Arms

COMP Cams Pro Magnum roller rocker arms combine the strength of 8650 chromoly steel and the weight savings of aluminum rockers. took advantage of computer design to simulate the stresses that affect rockers under various operating loads. This allowed the engineers to lessen the rockers' mass at non-critical areas, and strengthen the areas that take the most punishment. The results were rocker arms that are strong where they need to be, and actually weigh 5 percent less at the valve than comparable aluminum rockers. This means more RPM and valve train stability.

4.75 out of 5 stars ( 16 )

$249.95

—

$255.95

COMP Cams Ultra Pro Magnum Rocker Arm Upgrade Kits

COMP Cams Ultra Pro Magnum rocker arm upgrade kits include Ultra Pro Magnum rocker arms, guide plates, rocker studs, adjusting nuts, and set screws. These kits are designed to fit under the stock valve covers without machining. Build up your engine with COMP Cams Ultra Pro Magnum upgrade kits.

5.0 out of 5 stars ( 1 )

$784.95

COMP Cams Ultra Gold ARC Series Aluminum Break-In Rocker Arms

These COMP Cams Ultra Gold ARC Series aluminum break-in rockers are designed with a lower-than-stock ratio to help break in new Chevrolet V8 big block applications. They are engineered to eliminate excess open spring pressure, making them a must-have for the break-in process. If you have a new big block to break in, no other cams will help you do the job better than these COMP Cams Ultra Gold ARC Series aluminum break-in rocker arms.

Not Yet Reviewed

$50.95

—

$524.95

COMP Cams High Energy Rocker Arms

High Energy rocker arms from COMP Cams are excellent replacements for stock engine rebuilds with a stock or High Energy camshaft. They eliminate the noise and slop associated with worn or high-mileage stock rockers and match or exceed factory specifications.

4.0 out of 5 stars ( 28 )

$15.95

—

$274.95

COMP Cams Magnum Rocker Arm and Magnum Pushrod Kits

COMP Cams Magnum rocker arm and Magnum pushrod kits come with everything you need to install your rocker arms in one convenient package. Buying a kit takes out all of the guess work figuring out what will work best together. if you want to experience a world of difference, you need a set of these COMP Cams Magnum rocker arm and Magnum pushrod kits.

4.21 out of 5 stars ( 19 )

$328.95

—

$375.95

COMP Cams Ultra Pro Magnum Rocker Arm and Magnum Pushrod Kits

COMP Cams Ultra Pro Magnum rocker arm and magnum pushrod kits feature a web-like design that delivers increased strength and rigidity, while still reducing the moment of inertia and optimizing the dynamic balance. They have a unique black oxide finish to help prevent corrosion and increase durability. They also have precision-sorted needle bearings and hardened roller tips for the ultimate in performance and dependability. If you're looking for a set of rocker arms that is so strong that the bodies are guaranteed to never break, then these COMP Cams Ultra Pro Magnum rocker arm and magnum pushrod kits are what you've been waiting for.

Not Yet Reviewed

$611.95

COMP Cams Shaft Mount Aluminum Rocker Arms

COMP Cams shaft mount aluminum rocker arms are one of the most cost-effective ways to increase horsepower. These shaft rockers were designed using the latest in computer software and engineering. They center the roller tip over the valve tip at the correct time so that the roller tip is never more than 0.020 in. off-center of the valve tip. At the greatest load point, the roller tip contact is on the center of the valve. At valve closing, the roller tip contact is slightly behind the valve centerline. When the valve is at full open, the tip contact is slightly behind the centerline of the valve. The results are more horsepower and better performance.

5.0 out of 5 stars ( 1 )

$1,583.95

—

$3,021.95

COMP Cams Aluminum Roller Rocker Arms

COMP Cams aluminum roller rocker arms are made from a high-quality alloy, anodized for durability and good looks. They have needle-bearing trunnions to allow for high valve spring loads (over 350 lbs.) and a tensile strength of 80,000 psi. While these rockers are more expensive than COMP Cams High Energy or Magnum rockers, they're a great choice for any race application.

Not Yet Reviewed

$53.95

—

$1,056.95

COMP Cams LS1 Gen III Aluminum Shaft Rockers

These COMP Cams LS1 Gen III aluminum shaft rockers are CNC-machined for accuracy and precision alignment. They feature pressurized internal oiling to ensure long life and reduced friction. These rockers require minor valve cover machining and deliver the adjustability needed by most performance modifications.

Not Yet Reviewed

$1,623.95

—

$1,705.95

COMP Cams Upgraded OEM Rocker Arms for GM LT

The COMP Cams upgraded OEM rocker arms for GM LT are a great way to increase the durability and performance of your engine's valve train in high-rpm race and street applications. COMP Cams factory technicians upgrade the stock rocker arms with heavy-duty billet steel trunnions, high needle count full complement roller bearings, and hardened steel retaining rings for a complete package. These upgraded rocker arms are designed to improve the reliability of your GM Gen V LT rocker arms and are a must-have for whenever installing a high performance cam or higher load valve springs.

Not Yet Reviewed

$639.95

COMP Cams Magnum Hydraulic Cam and Lifter Kits

Designed for hot street/strip cars, COMP Cams Magnum Series cam and lifter kits require a higher compression ratio, rear-end gear ratio, and stall torque converter than stock. With a very aggressive profile, these Magnum hydraulic cam and lifter kits provide maximum top-end performance for your high performance car.

4.39 out of 5 stars ( 141 )

$305.95

—

$664.95

COMP Cams High Energy Cam and Lifter Kits

Increase your street machine's gas mileage and powerband performance! COMP Cams High Energy cam and lifter kits are designed for street engines with an 8:1 to 9:1 compression ratio. They also work well with all stock components, including intakes, exhaust manifolds, and carburetors. These kits offer good increases in both gas mileage and power throughout the rpm range for most street applications.

4.23 out of 5 stars ( 185 )

$305.95

—

$1,376.95

COMP Cams Valvetrain Checking Springs

Simplify your valvetrain maintenance with COMP Cams valvetrain checking springs. They feature a low-tension design that allows them to be installed by hand for measuring piston-to-valve clearance, rocker arm ratio, and degreeing in a camshaft. They're available as singles or pairs.

4.75 out of 5 stars ( 68 )

$8.95

—

$22.95

COMP Cams Magnum Hydraulic Camshafts

Designed for hot street/strip cars, COMP Cams Magnum series cams require a higher compression ratio, rear-end gear ratio, and stall torque converter than stock. With a very aggressive profile, these Magnum hydraulic camshafts provide maximum top-end performance for your high performance car.

4.75 out of 5 stars ( 60 )

$226.95

—

$473.95

COMP Cams Camshaft Degree Kits

COMP Cams camshaft degree kits dial-in your cam accurately! Degreeing your cam properly means better performance and these degree kits offer precision results. These kits have everything you need to work with the cylinder heads off including an easy-to-read and clean COMP Cams Sportsman 9 in. degree wheel. You can check cam lift, base circle runout, piston-to-valve clearance, top dead center, valve lift, valvetrain flex, and rocker arm ratio. Position your camshaft for performance with COMP Cams camshaft degree kits.

4.05 out of 5 stars ( 41 )

$249.95

—

$301.95

Page 1 of 2
Next