Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
107 Results Found For "controller"
COMP Cams’ highly-trained engineering staff uses some of the most sophisticated manufacturing and test equipment in the industry to design camshafts that make more horsepower...
COMP Cams’ highly-trained engineering staff uses some of the most sophisticated manufacturing and test equipment in the industry to design camshafts that make more horsepower than any other cam on the market. COMP Cams manufactures hydraulic and solid flat tappet cams, hydraulic and mechanical roller cams, and overhead cams for everything from OE replacement to full race, naturally aspirated, supercharged, turbocharged, or nitrous injected engines. For the ultimate in race-winning reliability, upgrade to COMP Cams’ competition-grade lifters, springs, timing sets, and gear sets—every part incorporates the same race-winning...
COMP Cams’ highly-trained engineering staff uses some of the most sophisticated manufacturing and test equipment in the industry to design camshafts that make more horsepower than any other cam on the market. COMP Cams manufactures hydraulic and solid flat tappet cams, hydraulic and mechanical roller cams, and overhead cams for everything from OE replacement to full race, naturally aspirated, supercharged, turbocharged, or nitrous injected engines. For the ultimate in race-winning reliability, upgrade to COMP Cams’ competition-grade lifters, springs, timing sets, and gear sets—every part incorporates the same race-winning technology used in NASCAR and NHRA competition. Don’t settle for anything less in your street machine.
COMP Cams Computer-Controlled Camshafts
COMP Cams computer-controlled camshafts are specifically designed for the serious street performance enthusiast. Whether it's for a street rod or a show car with power accessories, one of these cams will fit your engine's needs.
( 47 )
$288.95
—
$549.95
COMP Cams Open Wheel Modified Traction Control Camshafts
The industry-leading camshaft designers at COMP Cams set out to engineer a camshaft specifically for the requirements of open wheel modified racers. They had to take on the daunting task of building maximum horsepower, while still taking into consideration the tire restrictions, chassis technology, engine combinations, and common rule packages found in open wheel modified racing sanctioning bodies, such as IMCA. The Open Wheel Modified Traction Control Camshaft Series is comprised of 10 solid flat tappet and mechanical roller grinds for small block Chevys. These powerful camshafts are separated into four categories, each of which is optimized for open wheel modified racing. A combination of proven camshaft design technologies and the most innovative and aggressive lobe profiles in the industry has produced camshafts that deliver an extremely wide powerband, pulling hard off the corner and all the way down the straightaway. A further benefit of the broad horsepower curve of these cams is that they minimize tire spin, creating legal traction control. These innovative grinds have been extensively track-tested, and they have been proven to run faster than any camshaft that has ever been tested for this type of racing. COMP Cams OWM T/C Series offers a cam for just about every open wheel modified racer.
Not Yet Reviewed
$341.95
—
$574.95
COMP Cams Computer-Controlled Cam and Lifter Kits
COMP Cams computer-controlled cam and lifter kits are specifically designed for the serious street performance enthusiast. Whether it's for a street rod or a show car with power accessories, one of these kits will fit your engine's needs.
( 9 )
$390.95
—
$1,216.95
COMP Cams Ultra Pro Magnum Rocker Arms
Utilizing years of valvetrain design experience, the latest FEA stress analysis technology, and an exhaustive testing regiment (dyno and Spintron), COMP Cams engineering team left no detail to chance. Everything from casting techniques to valve spring clearance was scrutinized to ensure that Ultra Pro Magnum rocker arms not only lived up to the lofty standards of their predecessor, but also took stud mount rocker performance, stability, and value to a whole new level. The most noticeable advancement centers around their nearly unbreakable investment cast 8650 chromoly body. The arched, web-like design delivers a nearly 29 percent increase in strength and rigidity, while reducing the moment of inertia and optimizing the dynamic balance. The resulting rockers maximize lift and valvetrain control at high rpm. The increased retainer and valve spring clearances of the new design enable the use of large-diameter valve springs, retainers, and locks, without clearance or fitment issues. The new black oxide exterior finish offers a distinctive appearance, along with long-term corrosion resistance. The COMP Cams Ultra Pro Magnum rocker arms feature an oversized trunnion and precision-sorted needle bearings designed for use with high-load valve springs. These unique rockers also feature hardened roller tips for reduced friction and elimination of the valve stem "side loading" that causes premature valve guide wear.
( 207 )
$45.95
—
$622.95
COMP Cams Evolution Series Hydraulic Roller Lifters
COMP Cams Evolution Series hydraulic roller lifters with Hydraulic Cartridge Technology (HCT) are revolutionary patented tappets. A combination of a self-contained hydraulic cartridge within a thick-wall lifter body and accompanying reduced oil volume that is less effected by oil aeration delivers the most consistent bleed rates between each lifter on the market. The smaller volume within the hydraulic cartridge creates one of the most responsive and quietest lifters on the market today. Startup noise is greatly reduced, and a precision-controlled bleed down rate ensures excellent performance at high RPM. The cartridge design also allows for an incredibly stiff lifter body, greatly reducing body distortion and further ensuring consistent hydraulic performance. The patented HCT tappets are a completely new design that was developed specifically by COMP Cams to meet the demanding performance and durability required for modern street and performance street engines. The HCT and proprietary manufacturing processes of these lifters ensure precision and longevity that exceed any lifter on the market. Other features include increased duration and lift to the camshaft and two oiling features. Another industry first is the fact that the hydraulic element of this patented lifter is serviceable, allowing anyone to rebuild lifters in his or her own garage. Order the Evolution lifters recommended for your year/make and engine application.
( 15 )
$40.95
—
$726.95
COMP Cams Adjustable Phaser Lock Kits
These COMP Cams adjustable phaser lock kits are easily adjustable and allocate locking over the OEM 50 degree phaser range. They allow you the use of larger, more aggressive aftermarket camshafts and are extremely durable. If you're looking for a way to gain more precise centerline control at high rpm under extreme conditions, then these high-quality adjustable phaser lock kits by COMP Cams will do the trick.
( 1 )
$131.95
—
$243.95
COMP Cams Camshaft Phaser Limiter Kits
COMP Cams camshaft phaser limiter kits are specially designed, computer-controlled cam gears that automatically optimize camshaft timing based on the current engine rpm. The engine oil is pressure fed to the phasers through passageways in the cylinder heads and cams. The engine computer's control solenoids that adjust this oil flow into and out of the phasers' control chambers, give the ability to retard the cams. While this technology provides fuel efficiency and the ability to always be in the best position for maximum power, regardless of engine rpm, it does present some limitations when it comes to performance cams. With such a wide range of valve timing movement, there is very little piston to valve clearance, which limits you to small cam profiles with little overlap.
( 2 )
$120.95
COMP Cams 3-Piece Billet Aluminum Timing Covers
COMP Cams 3-piece billet aluminum timing covers not only look good, but they work good, too. Save time and the hassle of breaking the oil pan seal when you need to change or adjust your timing chain or belt. Even with a thrust button, most stock stamped front covers flex under pressure, causing erratic ignition timing. These covers feature a rigid billet aluminum design that is strong enough to eliminate this flexing problem, hold your cam in place, and keep your timing in control. Endplay adjustment is made easy thanks to an access hole for the dial indicator. Plus, the 3-piece design allows your camshaft to be replaced without disturbing the oil pan seal or removing the harmonic damper. The covers use the same replacement hardware as the 2-piece models. In addition, some of these covers feature integrated time chain tensioner sets and quick-set cam correct and thrust adjustment.
( 18 )
$290.95
COMP Cams 2-Piece Billet Aluminum Timing Covers
Even with a thrust button, most stock stamped front covers flex under pressure, causing erratic ignition timing. COMP Cams 2-piece billet aluminum timing covers are strong and rigid enough to eliminate this flexing problem, hold your cam in place, and keep your timing in control. Endplay adjustment is made easy, thanks to an access hole for the dial indicator. Plus, the 2-piece design allows your camshaft to be replaced without disturbing the oil pan seal, making for a much more user-friendly unit.
( 16 )
$290.95
—
$333.95
COMP Cams Cam Phaser Limiter Kits
Comp Cams cam phaser limiter kits are specially designed, computer-controlled cam gears that automatically optimize camshaft timing based on the current engine rpm Engine oil is pressure-fed to the phasers through passageways in the cylinder heads and cams. The engine computers control solenoids that adjust this oil flow into and out of the phasers' control chambers, creating the ability to retard the cams. While this technology provides fuel efficiency and the ability to always be in the best position for maximum power, regardless of engine rpm, it does present some limitations when it comes to performance cams. With such a wide range of valve timing movement, there is very little piston to valve clearance, which limits you to small cam profiles with little overlap. COMP Cams cam phaser limiter kits restrict the range of cam timing movement (14 degrees for Chrysler, 20 degrees for Ford, and 22 degrees for GM), thus providing the necessary valve clearance for serious performance cams with tighter lobe separations--all while utilizing the benefits of VVT technology. Gain some serious upper rpm power without sacrificing bottom end or mid-range performance with Comp Cams cam phaser limiter kits.
( 6 )
$82.95
—
$281.95
COMP Cams Arbor/Pilots
COMP Cams spring seat cutter (sold separately) requires the use of an arbor/pilot, which is available in different sizes. These COMP Cams arbor/pilots also work with valve guide cutters (sold separately) used for shortening the guide for a high lift cam or installing a COMP Cams PTFE seal for oil control.
( 23 )
$39.95
COMP Cams Tri-Power Xtreme Modular 2V Camshafts
COMP Cams Tri-Power Xtreme modular 2-valve camshafts have been designed to work with the FAST-FLASH programmers to optimize torque and horsepower and improve fuel efficiency. They are available for late model, fuel injected, computer-controlled engines. These 2-valve camshafts feature a hydraulic roller swinging follower design, work with a standard valvetrain, and require no modifications to install.
Not Yet Reviewed
$798.95
—
$838.95
COMP Cams Piston Ring Expander Pliers
COMP Cams piston ring expander pliers offer versatility by accommodating various ring sizes for quick and efficient installation and removal of piston rings, saving time and effort during engine rebuilds or repairs. Traditional methods of installing or removing piston rings by hand can lead to scratching the piston or breaking the ring due to excessive twisting or force. COMP Cams piston ring expander pliers provide controlled and even pressure, minimizing the chances of damage. The pliers are heat-treated for long service life and durability, with rubberized hand grips for better comfort.
Not Yet Reviewed
$22.95
COMP Cams Max-Lift BSR Shaft Rocker Systems
COMP Cams introduces another industry first with their Max-Lift BSR shaft rocker systems, a bolt-in bushed shaft rocker system that increases valve train stiffness helping your engine achieve higher levels of performance. By tying all eight rocker arms together on a single shaft that fits in the stock rocker stand, COMP Cams has found a way to improve valve train dynamics, increase valve train stiffness and reduce deflection under extreme loads. The increased valve train stiffness created the BSR rocker system allows your existing cam to act like a larger camshaft by transferring more of the motion to the valve or the use of more aggressive, higher lift cams without losing control of the valve train. Take complete control of your valves with the COMP Cams Max-Lift BSR shaft rocker system.
( 5 )
$731.95
—
$883.95
COMP Cams Tree Shape Pointed End Burrs
COMP Cams Solid Carbide Tree Shape pointed end burrs allow for access to tight corners, sharp angles, and small spaces that other burr shapes might miss. Aluminum cut burrs are for soft, non-ferrous metals, or non-metals. They're also great for removing large amounts of material very quickly. Double cut burrs are for general purpose use and are designed to make a small controllable cut that's suitable for cast iron or aluminum. The Tree Shape pointed end burrs are manufactured from durable material and utilize a precise, straight, 1/4 in. shank, in various lengths. Select the COMP Cams Tree Shape pointed end burrs better suited to your project's needs.
Not Yet Reviewed
$30.95
—
$52.95
COMP Cams Tri-Power Xtreme Camshafts
COMP Cams Tri-Power Xtreme camshafts have been designed to work with the FAST-FLASH programmers to optimize torque and horsepower and improve fuel efficiency. They are available for late model, fuel injected, computer-controlled engines. The COMP Cams Tri-Power Xtreme camshafts work with a standard valvetrain, and require no modifications to install.
Not Yet Reviewed
$531.95
—
$855.95
COMP Cams Roller Cam Bearings
The latest technology in racing engines includes larger diameter cam journals and needle bearings. COMP Cams now offers these sometimes hard-to-find bearings in complete sets or as individual bearings. Not only will these bearings decrease friction, but they will also hold oil control much more closely. These bearings are steel jacketed and encapsulated for ease of installation.
( 3 )
$33.95
—
$119.95
COMP Cams Electric Powered Ring Filers
COMP Cams electric powered ring filers put an end to tedious filing and constant rechecking to get perfectly matched gaps. Simply grind the first ring and then complete the rest with the exact same setup to ensure consistency between all parts. COMP Cams ring filers feature powerful, high-torque motors, large grinding wheels, fine adjustment feed screws, deburring, and capabilities for rings from 2.5 in. up to 5.0 in. diameters. Features include: * Powerful AC motor makes grinding a snap; won't stall and there is never a need to replace batteries. * Large 3 in. grinding wheel allows for fast, accurate cuts * Grinds 1 to 8 ring gaps within .001 in. accuracy * Knurled in-feed adjustment knob offers extra control * Dial indicator means a super accurate cut the first and last time * Included de-burring wheel conveniently knocks off the sharp edges created when grinding
Not Yet Reviewed
$1,318.95
COMP Cams XFI SPR GM Gen IV VVT Camshafts
Rather than find ways around the recent advances in GM engine technology, the engineers at COMP Cams have found a way to work with the innovations to produce a powerful line of cams for newer L92 engines. These COMP Cams XFI SPR GM Gen IV VVT camshafts feature four unique cam grinds that provide substantial gains in both torque and horsepower. The 2007 and later GM L92 engines utilize Variable Valve Timing (VVT) technology, which changes the timing of the valves while the engine is in operation. VVT is controlled via cam phasers, which are computer-controlled cam gears that automatically optimize camshaft timing based on current engine rpm. While this technology provides tremendous efficiency benefits, it presents a challenge when designing performance camshafts. This is due to the wide range of the valve timing movement, which causes piston-to-valve clearance. Using the COMP Cams cam phaser limiter kit restricts the range of cam timing movement from 50 degrees to 20 degrees. While still utilizing the efficiency benefits of the VVT technology, this modification provides the necessary valve clearance for larger, more serious performance camshafts with tighter lobe separations.
( 1 )
$541.95
COMP Cams Precision Straight Edge Tools
COMP Cams precision straight edge tools are essential tools that are a vital part of quality control procedures in automotive repair and manufacturing. These machinist straight edges allow users to check the straightness and evenness of cylinder heads, flywheels, engine blocks, or any flat surface! They are constructed from heat-treated steel with 1/4 in. thick straight edges, precision-ground to .001 in. and are available in a choice of lengths and feature a convenient hang hole at one end. COMP Cams precision straight edge tools come complete with a durable, wooden storage case.
Not Yet Reviewed
$173.95
COMP Cams Hustler Valve Springs
COMP Cams Hustler valve springs are excellent performance upgrades in GM 603/604 and CT525 LS crate race applications with tight rules packages. These improved versions of the popular GM LS6 "blue" valve springs, offer a 4 percent higher seat and open loads for better dynamic control, as well as an extra .020 in. of lift capability over stock. COMP Cams Hustler valve springs are made from high-quality wire in small batch manufacturing processes for durability, and they're even painted blue so they are visually identical to the OEM springs.
Not Yet Reviewed
$356.95
COMP Cams Custom Ground Camshaft Cores
Design your perfect cam with these custom cores from COMP Cams. There is a large number of custom ground cam cores available for most any engine application, depending upon the type of cam being ground. This gives you the freedom to choose the core, lobe design, and lobe separation angle that best suit your needs. The possibilities are endless with COMP Cams!
( 4 )
$405.99
COMP Cams Remote Starter Switches
COMP Cams remote starter switches allow you to perform work under the hood without a partner assisting from the driver's seat. Whether you're adjusting valves or servicing the starter solenoid, you can now turn the engine over with just the push of a button. These inexpensive gadgets attach to the battery and the starter, giving you total remote control. It's like having a second pair of hands--courtesy of COMP Cams.
( 4 )
$43.95
COMP Cams V-Thunder Hy-Rev Lifters
COMP Cams V-Thunder Hy-Rev lifters were designed to handle the demand of today's high performance engines. These anti-pump-up lifters are produced on state-of-the-art computer controlled machinery which hold the tolerances to 0.003 in. for a precise fit. If you are looking to increase rpm capability and valvetrain stability, look no further then COMP Cams V-Thunder Hy-Rev lifters.
Not Yet Reviewed
$24.95
—
$110.95
