65 Results Found For "arms"

COMP Cams’ highly-trained engineering staff uses some of the most sophisticated manufacturing and test equipment in the industry to design camshafts that make more horsepower...

COMP Cams’ highly-trained engineering staff uses some of the most sophisticated manufacturing and test equipment in the industry to design camshafts that make more horsepower than any other cam on the market. COMP Cams manufactures hydraulic and solid flat tappet cams, hydraulic and mechanical roller cams, and overhead cams for everything from OE replacement to full race, naturally aspirated, supercharged, turbocharged, or nitrous injected engines. For the ultimate in race-winning reliability, upgrade to COMP Cams’ competition-grade lifters, springs, timing sets, and gear sets—every part incorporates the same race-winning...

Showing In Stock Items. Show All 71 Items.

Not Showing Customizable Items. View Customizable Items.

Individual Parts

Part Groups

Results 1 - 24 of 65

COMP Cams Ultra Pro Magnum Rocker Arms

Utilizing years of valvetrain design experience, the latest FEA stress analysis technology, and an exhaustive testing regiment (dyno and Spintron), COMP Cams engineering team left no detail to chance. Everything from casting techniques to valve spring clearance was scrutinized to ensure that Ultra Pro Magnum rocker arms not only lived up to the lofty standards of their predecessor, but also took stud mount rocker performance, stability, and value to a whole new level. The most noticeable advancement centers around their nearly unbreakable investment cast 8650 chromoly body. The arched, web-like design delivers a nearly 29 percent increase in strength and rigidity, while reducing the moment of inertia and optimizing the dynamic balance. The resulting rockers maximize lift and valvetrain control at high rpm. The increased retainer and valve spring clearances of the new design enable the use of large-diameter valve springs, retainers, and locks, without clearance or fitment issues. The new black oxide exterior finish offers a distinctive appearance, along with long-term corrosion resistance. The COMP Cams Ultra Pro Magnum rocker arms feature an oversized trunnion and precision-sorted needle bearings designed for use with high-load valve springs. These unique rockers also feature hardened roller tips for reduced friction and elimination of the valve stem "side loading" that causes premature valve guide wear.

4.77 out of 5 stars ( 206 )

$45.95

—

$622.95

COMP Cams Ultra Pro Magnum XD Roller Rocker Arms

Built to outlast and outperform in accuracy and strength, Ultra Pro Magnum XD roller rocker arms are engineered from durable 8650 steel and include a machined billet pushrod seat insert for a wide range of super accurate ratios. A unique and wide ratio range to fit almost any popular application from 1.5 to 1.8 in 0.5 in. increments for Chevy and 1.6 to 1.73 for various Ford applications is available. These Ultra Pro Magnum XD rockers are fully rebuildable and boast precision-sorted needle bearings and hardened roller tips. And, they work with most diameter springs and retainers. The XD design utilizes advanced FEA and CAD design and development to improve strength, stiffness and MOI (moment of inertia) optimization for drag and circle track applications.

4.58 out of 5 stars ( 60 )

$55.95

—

$649.95

COMP Cams Magnum Roller Tip Rocker Arms

One way to increase power is to increase lift. That's what makes COMP Cams Magnum roller tip rocker arms so popular. They're one of the highest lift rockers you can get outside of racing. And, along with the lift, you also get a ball pivot roller tip to prevent valve stem and guide wear.

4.58 out of 5 stars ( 291 )

$20.95

—

$240.95

COMP Cams High Energy Diecast Aluminum Rocker Arms

Finally, you can get high performance without a high price with COMP Cams High Energy diecast aluminum rocker arms. COMP Cams is a leader in valvetrain technology and has developed these High Energy rockers to provide a superior strength to weight ratio to withstand the hardships of your street performance and mild race engines, while adding valve lift. These diecast aluminum, larger-than-stock rocker bodies are designed to be stiffer and more durable. They feature needle-bearing fulcrums and roller tips to reduce friction and lower oil temperatures for even more horsepower potential. Maybe you're on a budget, or maybe you just appreciate getting the most for your coin; make an affordable choice without sacrificing performance--get COMP Cams High Energy diecast aluminum rocker arms.

4.52 out of 5 stars ( 223 )

$24.95

—

$270.95

COMP Cams Ultra Gold ARC Series Aluminum Rocker Arms

Designed specifically for high performance street and race engines, COMP Cams Ultra Gold ARC Series aluminum rocker arms are precision CNC-machined to strict tolerances. They incorporate modern technology and design features to create the most advanced aluminum rocker arms available. Proven to withstand extremely aggressive spring pressure, the COMP Cams Ultra Gold ARC Series aluminum rocker arms use their CNC-machined aluminum design for high quality and the ultimate in ratio accuracy.

4.63 out of 5 stars ( 115 )

$41.95

—

$1,626.95

COMP Cams Pro Magnum Shaft Mount Roller Rocker Arms

COMP Cams Pro Magnum shaft mount roller rocker arms combine the strength of 8650 chromoly steel and the weight savings of aluminum rockers. COMP Cams took advantage of computer design to simulate the stresses that affect rockers under various operating loads. This allowed the engineers to lessen the rockers' mass at non-critical areas and strengthen the areas that take the most punishment. The results are rocker arms that are strong where they need to be and actually weigh 5 percent less at the valve than comparable aluminum rockers.

4.58 out of 5 stars ( 31 )

$79.95

—

$948.95

COMP Cams Retrofit Trunnion Kits for GM LS Series

COMP Cams retrofit trunnion kits for GM LS Series engines are designed to convert stock LS Series rocker arms into captured roller trunnions for high-rpm race applications. They include rocker arm trunnions, bearings, and retaining rings for a complete installation. Keep your valvetrain reliable throughout the entire rpm range with one of these GM LS rocker arm bearing upgrade kits. Kits include: * 16 rocker arm trunnions, LS-type retrofit * 32 rocker arm bearings, LS-type retrofit * 32 rocker arm retaining rings, LS-type retrofit * 16 bolts for LS trunnion kit * 2 washers for pressing trunnions

4.57 out of 5 stars ( 105 )

$184.95

—

$222.95

COMP Cams Rocker Arm Adjusting Nuts

COMP Cams rocker arm adjusting nuts are designed for the ultimate in strength and locking force. They are precision-ground for minimum runout and are tapered for extra strength in the locking area. The special alloys in the polylocks ensure a quality and strength not found in any other competitive products.

4.44 out of 5 stars ( 147 )

$6.95

—

$152.95

COMP Cams Magnum Rocker Arm and High Energy Pushrod Kits

COMP Cams Magnum rocker arm and high energy pushrod kits are convenient packages that take the guess work out of choosing perfectly match performance components. If you want to experience a world of difference with your rocker arms and pushrods, then you need a set of these COMP Cams Magnum rocker arm and high energy pushrod kits.

4.0 out of 5 stars ( 86 )

$187.95

—

$379.95

COMP Cams Max-Lift BSR Shaft Rocker Systems

COMP Cams introduces another industry first with their Max-Lift BSR shaft rocker systems, a bolt-in bushed shaft rocker system that increases valve train stiffness helping your engine achieve higher levels of performance. By tying all eight rocker arms together on a single shaft that fits in the stock rocker stand, COMP Cams has found a way to improve valve train dynamics, increase valve train stiffness and reduce deflection under extreme loads. The increased valve train stiffness created the BSR rocker system allows your existing cam to act like a larger camshaft by transferring more of the motion to the valve or the use of more aggressive, higher lift cams without losing control of the valve train. Take complete control of your valves with the COMP Cams Max-Lift BSR shaft rocker system.

4.2 out of 5 stars ( 5 )

$731.95

—

$883.95

COMP Cams Pro Magnum Roller Rocker Arms

COMP Cams Pro Magnum roller rocker arms combine the strength of 8650 chromoly steel and the weight savings of aluminum rockers. took advantage of computer design to simulate the stresses that affect rockers under various operating loads. This allowed the engineers to lessen the rockers' mass at non-critical areas, and strengthen the areas that take the most punishment. The results were rocker arms that are strong where they need to be, and actually weigh 5 percent less at the valve than comparable aluminum rockers. This means more RPM and valve train stability.

4.75 out of 5 stars ( 16 )

$249.95

—

$255.95

COMP Cams Magnum Rocker Arm Studs

Replace your stock rocker arm studs with these COMP Cams rocker arm studs. The Magnum series studs work well in applications with moderate lifts and spring pressures. These studs have thin jam nuts for rocker clearance, rolled threads for maximum contact, and ground-flat tops to achieve and maintain accurate valve adjustments. The jam nuts are large in diameter to spread the load over larger areas. COMP Cams studs have generous radii and feature a black oxide finish.

4.88 out of 5 stars ( 24 )

$11.95

—

$81.95

COMP Cams Hi-Tech Rocker Arm Studs

Replace your stock rocker arm studs with these COMP Cams rocker arm studs. When ultimate strength is required, as with high-rpm roller cam applications, Hi-Tech Race studs are just what you need. These studs have thin jam nuts for rocker clearance, rolled threads for maximum contact, and ground-flat tops to achieve and maintain accurate valve adjustments. The jam nuts are large in diameter to spread the load over larger areas. All COMP Cams Hi-Tech studs have generous radii and feature a black oxide finish.

4.83 out of 5 stars ( 24 )

$12.95

—

$215.95

COMP Cams Stud Girdles

COMP Cams is proud to offer the finest stud girdles on the market. These stud girdles will tie your studs together, as well as keep them in line.

4.25 out of 5 stars ( 24 )

$183.95

—

$432.95

COMP Cams High Energy Pedestal Mount Rocker Arms

These High Energy pedestal mount rocker arms from COMP Cams are excellent replacements for stock engine rebuilds with a stock or High Energy camshaft. They eliminate the noise and slop associated with worn or high-mileage stock rockers, and match or exceed factory specifications. These rockers include adjusting nuts and pivot balls where required.

3.2 out of 5 stars ( 5 )

$200.95

COMP Cams Adjustable Rocker Arm Conversion Kits

COMP Cams adjustable rocker arm conversion kits replace the factory studs with new studs, spacers, and adjusting nuts. These kits are a simple, easy, and inexpensive way to add an adjustable valvetrain to your engine.

4.6 out of 5 stars ( 10 )

$174.95

COMP Cams Shaft-Type Rocker Arm Adjusting Screws

These COMP Cams shaft-type rocker arm adjusting screws are precision-machined from premium billet steel material and selectively heat-treated to provide maximum strength. They're extremely lightweight and are drilled for oiling, depending on your application. Whether you're rebuilding your engine or keeping up scheduled maintenance, COMP Cams shaft-type rocker arm adjusting screws will keep your valvetrain operating smoothly.

4.33 out of 5 stars ( 6 )

$22.95

COMP Cams Magnum Rocker Arm and Magnum Pushrod Kits

COMP Cams Magnum rocker arm and Magnum pushrod kits come with everything you need to install your rocker arms in one convenient package. Buying a kit takes out all of the guess work figuring out what will work best together. if you want to experience a world of difference, you need a set of these COMP Cams Magnum rocker arm and Magnum pushrod kits.

4.21 out of 5 stars ( 19 )

$328.95

—

$396.95

COMP Cams High Energy Rocker Arms

High Energy rocker arms from COMP Cams are excellent replacements for stock engine rebuilds with a stock or High Energy camshaft. They eliminate the noise and slop associated with worn or high-mileage stock rockers and match or exceed factory specifications.

4.0 out of 5 stars ( 28 )

$15.95

—

$239.95

COMP Cams Rocker Shaft Retainers and Bolts

COMP Cams rocker shaft retainers and bolts contain the hold-down retainers and bolts to secure both rocker arm shafts. They are manufactured to OEM Mopar specifications to ensure the highest quality. The retainers and bolts will fit all cylinder heads with cast-in rocker arm stands.

4.71 out of 5 stars ( 7 )

$81.95

COMP Cams Magnum Rocker Arm Replacement Pivot Balls

COMP Cams offers these pivots balls as direct replacements for those used in their Magnum rockers.

4.7 out of 5 stars ( 10 )

$6.95

—

$32.95

COMP Cams Rocker Stud Remover and Tap Guides

Remove pressed-in rocker studs and tap for screw-in studs with these rocker stud puller and tap guides from COMP Cams. To remove pressed-in rocker studs, slide the rocker stud puller over two side-by-side studs, and then crank down on the retaining nut to force out the stud. Use the tool with the included tap guide to ensure proper alignment when tapping the stud boss for screw-in studs.

2.82 out of 5 stars ( 11 )

$47.95

COMP Cams LS Trunnion Installation and Disassembly Tools

COMP Cams LS rocker trunnion installation and disassembly tools are nicely engineered pieces that simplify improving your rocker arms' stability. They're compatible with all stock LS rockers. The tools can be used with a bench vise, arbor press, and C-clamp, making them the most resourceful alternatives on the market. With precision-machined cylindrical steel construction, the tools are black oxide plated for corrosion resistance and increased lifespan. A centering die with an embedded magnet is included to ensure consistent bearing placement and one-handed assembly. COMP Cams engineers have helped make this task quick and easy for you.

5.0 out of 5 stars ( 3 )

$59.95

COMP Cams Trunnion-Upgraded OEM Rocker Arms for GM LS

Add some punch to your Chevy LS1 engine—install a set of GM LS trunnion-upgraded OEM rocker arms from COMP Cams, the absolute leader in valvetrain technology! These upgraded rocker arms feature a stronger, more durable trunnion and captured bearing design to eliminate cageless needle bearing failure in stock LS rocker arms when loads are increased. Choose the COMP Cams rocker arm application (ratio) that will best fit your goals. Additional features include: * High-quality steel body * Black oxide finish for long-term durability * Increases lift capacity * Utilizes caged roller bearings * Trunnions are secured by snap rings * Meets or exceeds OEM specifications

Not Yet Reviewed

$37.95

—

$627.95

Page 1 of 3
Next