Availability
Prevent cam damage from fuel pump lobe wear. COMP Cams has a reputation for being a problem solver. When a high-pressure fuel pump is run with a steel roller cam core, the stock fuel pump pushrod is not compatible with the steel core. You can damage an expensive roller cam as a result of wear at the fuel pump lobe. COMP Cams offers several fuel pump pushrods in response to this problem.
( 76 )
$26.95
—
$52.95
COMP Cams pushrod guideplates are necessary in high-rpm motors. They keep your pushrods in line with your lifter cups and rocker arms—and prevent deflecting or walking sideways. The guideplates are hardened to prevent premature wear. They're available in sizes and styles for fitment on a variety of engine applications.
( 180 )
$26.95
—
$57.95
COMP Cams crankshaft sockets are the perfect addition to your engine-building toolbox. They accept 1/2 in. drive ratchets for versatility and easy engine rotation. They're precision-machined for an accurate fit over the crank snout, and their knurled retaining nut threads-on to sandwich a degree wheel in place. The nut can be loosened, while on the crank snout, so that the wheel can be turned independently of the engine when finding top dead center.
( 194 )
$59.95
These COMP Cams engine finishing kits contain the often-forgotten components missing during final engine assembly. They include parts like Woodruff keys, cylinder head alignment dowels, cam bolts, timing cover dowels, and oil pump dowels. Available for small and big block Chevrolet and small block Ford engines, the COMP Cams engine finishing kits make engine assembly easy.
( 66 )
$22.95
—
$54.95
Because all roller cam lobes are ground flat instead of tapered, like hydraulic or solid cams, COMP Cams provides a means of holding the cam back to the rear of the engine. Their cam buttons ride between the front of the timing gear and the back of the front cover and can be shimmed for proper endplay of the cam. COMP Cams makes solid nylon buttons and roller bearing thrust buttons for the ultimate in performance.
( 109 )
$20.95
—
$31.95
Prevent your lifters from rotating with Comp Cams retrofit lifter guides. Utilize these guides to keep the wheels of your hydraulic lifters rolling and prevent them from sliding over your cam. These "dog bones" are made from steel. Keep your lifters in line with Comp Cams retrofit hydraulic roller lifter guides.
( 3 )
$52.95
These COMP Cams shaft-type rocker arm adjusting screws are precision-machined from premium billet steel material and selectively heat-treated to provide maximum strength. They're extremely lightweight and are drilled for oiling, depending on your application. Whether you're rebuilding your engine or keeping up scheduled maintenance, COMP Cams shaft-type rocker arm adjusting screws will keep your valvetrain operating smoothly.
( 5 )
$22.95
Built to outlast and outperform in accuracy and strength, Ultra Pro Magnum XD roller rocker arms are engineered from durable 8650 steel and include a machined billet pushrod seat insert for a wide range of super accurate ratios. A unique and wide ratio range to fit almost any popular application from 1.5 to 1.8 in 0.5 in. increments for Chevy and 1.6 to 1.73 for various Ford applications is available. These Ultra Pro Magnum XD rockers are fully rebuildable and boast precision-sorted needle bearings and hardened roller tips. And, they work with most diameter springs and retainers. The XD design utilizes advanced FEA and CAD design and development to improve strength, stiffness and MOI (moment of inertia) optimization for drag and circle track applications.
( 59 )
$55.95
—
$59.95
Designed specifically for high performance street and race engines, COMP Cams Ultra Gold ARC Series aluminum rocker arms are precision CNC-machined to strict tolerances. They incorporate modern technology and design features to create the most advanced aluminum rocker arms available. Proven to withstand extremely aggressive spring pressure, the COMP Cams Ultra Gold ARC Series aluminum rocker arms use their CNC-machined aluminum design for high quality and the ultimate in ratio accuracy.
( 112 )
$41.95
—
$53.95
COMP Cams Endure-X roller lifters set the standard for solid roller lifter technology. The hydraulic roller lifters are designed with oiling and inboard link bars, they're engineered to withstand the demands of aggressive cam lobe designs and increased RPM ranges. The lifters feature a wear-resistant tool steel axle, precision sorted needle bearings, and most applications include EDM oil injection technology that guarantees the bearing assembly receives a constant flow of oil. Endure-X solid roller lifters are heat treated, machined to ultra-high tolerances, and fully rebuildable.
( 40 )
$58.95
—
$64.95
Utilizing years of valvetrain design experience, the latest FEA stress analysis technology, and an exhaustive testing regiment (dyno and Spintron), COMP Cams engineering team left no detail to chance. Everything from casting techniques to valve spring clearance was scrutinized to ensure that Ultra Pro Magnum rocker arms not only lived up to the lofty standards of their predecessor, but also took stud mount rocker performance, stability, and value to a whole new level. The most noticeable advancement centers around their nearly unbreakable investment cast 8650 chromoly body. The arched, web-like design delivers a nearly 29 percent increase in strength and rigidity, while reducing the moment of inertia and optimizing the dynamic balance. The resulting rockers maximize lift and valvetrain control at high rpm. The increased retainer and valve spring clearances of the new design enable the use of large-diameter valve springs, retainers, and locks, without clearance or fitment issues. The new black oxide exterior finish offers a distinctive appearance, along with long-term corrosion resistance. The COMP Cams Ultra Pro Magnum rocker arms feature an oversized trunnion and precision-sorted needle bearings designed for use with high-load valve springs. These unique rockers also feature hardened roller tips for reduced friction and elimination of the valve stem "side loading" that causes premature valve guide wear.
( 202 )
$45.95
—
$46.95
Remove pressed-in rocker studs and tap for screw-in studs with these rocker stud puller and tap guides from COMP Cams. To remove pressed-in rocker studs, slide the rocker stud puller over two side-by-side studs, and then crank down on the retaining nut to force out the stud. Use the tool with the included tap guide to ensure proper alignment when tapping the stud boss for screw-in studs.
( 10 )
$47.95
Using COMP Cams offset bushings is the simplest way to change the degree of a camshaft in relation to the crankshaft. These bushings offer accurate positioning of the cam because of their precise manufacturing.
( 14 )
$20.95
—
$39.95
Stress placed on cams and timing sets in today's racing engines produces a weak area at the front of the block. COMP Cams solved the problem with their moly-coated wear plates and thrust bearings. They are a must for all Chevy big block engines. The thrust bearings are a one-piece encapsulated design for the Chevys and a 3-piece design for Fords.
( 25 )
$20.95
—
$23.95
One way to increase power is to increase lift. That's what makes COMP Cams Magnum roller tip rocker arms so popular. They're one of the highest lift rockers you can get outside of racing. And, along with the lift, you also get a ball pivot roller tip to prevent valve stem and guide wear.
( 290 )
$20.95
—
$31.95
Finally, you can get high performance without a high price with COMP Cams High Energy diecast aluminum rocker arms. COMP Cams is a leader in valvetrain technology and has developed these High Energy rockers to provide a superior strength to weight ratio to withstand the hardships of your street performance and mild race engines, while adding valve lift. These diecast aluminum, larger-than-stock rocker bodies are designed to be stiffer and more durable. They feature needle-bearing fulcrums and roller tips to reduce friction and lower oil temperatures for even more horsepower potential. Maybe you're on a budget, or maybe you just appreciate getting the most for your coin; make an affordable choice without sacrificing performance--get COMP Cams High Energy diecast aluminum rocker arms.
( 219 )
$24.95
—
$26.95
Keep your valvetrain running smooth. COMP Cams High Energy hydraulic roller lifters are for use with the newly designed hydraulic roller cam series, or as performance replacements for stock hydraulic roller lifters. You must be certain that the lifters are correct for the type of block used.
( 73 )
$35.95
Designed for extreme racing applications, COMP Cams replacement Hi-Tech roller race timing chains are double-row chains for extra strength and reliability. They serve as replacement chains for the old, worn-out chains in your Hi-Tech roller race timing sets, which are dynamically balanced for smoother, more accurate operation, with less fluctuation.
( 5 )
$31.95
—
$57.95
COMP Cams offers these pivots balls as direct replacements for those used in their Magnum rockers.
( 10 )
$27.95
—
$32.95
COMP Cams High Energy timing sets are a solid choice for many applications. They are designed to meet or exceed all OE specifications, which makes them a good selection for RVs, street rods, or daily drivers.
( 27 )
$52.95
—
$60.95
For the enthusiast who chooses a solid lifter cam, COMP Cams offers the highest quality solid lifters available today. These lifters are manufactured using the tightest tolerances in the industry, ensuring optimum performance. The crown of the lifters is ground to a precise radius for proper break-in and to guarantee long life. The oil-metering band is milled to the correct depth to prevent too much oil from being delivered to the top of the motor, and to prevent horsepower loss. Order the size and quantity needed for your engine application.
( 27 )
$24.95
—
$62.95
When building a high performance engine with a solid or solid roller cam, it's necessary to meter the amount of oil going through the lifters and up to the rocker arms. Too much oil to the top will starve the main and rod bearings and cause engine failure. COMP Cams oil restrictors are easy-to-use parts and should be considered when installing a solid lifter or a solid roller camshaft. Simply screw directly into the oil gallery with no machine work.
Not Yet Reviewed
$27.95
COMP Cams timing cover hardware kits are quality-made replacement pieces for your COMP Cams timing cover. These kits include the thrust button, shims, locking plate, and bolts.
Not Yet Reviewed
$60.95
These High Energy hydraulic lifters from COMP Cams feature a patented, constant orifice-metering valve that precisely meters oil to the rocker arms. Continuous contact between the metering valve and the precisely coined bottom surface of the pushrod seat is maintained throughout the engine's rpm range, eliminating excessive oiling at high speeds. The pushrod seat is made of a special powdered metal iron alloy, heat-treated for strength and wear resistance. The longer piston is produced with through-hardened steel that provides more bearing surface and increased lifter longevity. These lifters have a lightweight check valve disk that allows for quicker response, resulting in increased engine speed before valve float.
( 153 )
$20.95
—
$28.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
