Availability
Because all roller cam lobes are ground flat instead of tapered, like hydraulic or solid cams, COMP Cams provides a means of holding the cam back to the rear of the engine. Their cam buttons ride between the front of the timing gear and the back of the front cover and can be shimmed for proper endplay of the cam. COMP Cams makes solid nylon buttons and roller bearing thrust buttons for the ultimate in performance.
( 109 )
$15.95
COMP Cams cam lock plates will keep your cam installed in the right position. Most locking plates come with Grade 8 bolts and have a black oxide finish.
( 64 )
$10.95
Simplify your valvetrain maintenance with COMP Cams valvetrain checking springs. They feature a low-tension design that allows them to be installed by hand for measuring piston-to-valve clearance, rocker arm ratio, and degreeing in a camshaft. They're available as singles or pairs.
( 67 )
$8.95
—
$15.95
These Gator brand clamps from COMP Cams are produced using a stainless steel continuous band with extruded, asymmetrical threads for reliable performance. The edges of the band are rolled to prevent them from damaging the hose. This is especially important on silicone hoses that have a soft, vulnerable cover. An asymmetrical (offset) gear box is designed to remain stationery as the clamps are tightened to prevent movement over the hose. The combination of the asymmetrical gear box and the extruded threads provides an even clamping force over the surface of the hose that ensures proper sealing with minimal torque. Gator brand clamps hold up to 3.7 ft.-lbs. (5 Nm) of torque; conventional clamps strip and fail at this torque. Gator brand clamps can be installed using a flat blade screwdriver, a metric socket wrench, or the Gator brand flexible clamp tool for maximum torque potential.
( 74 )
$6.95
—
$13.95
These High Energy hydraulic lifters from COMP Cams feature a patented, constant orifice-metering valve that precisely meters oil to the rocker arms. Continuous contact between the metering valve and the precisely coined bottom surface of the pushrod seat is maintained throughout the engine's rpm range, eliminating excessive oiling at high speeds. The pushrod seat is made of a special powdered metal iron alloy, heat-treated for strength and wear resistance. The longer piston is produced with through-hardened steel that provides more bearing surface and increased lifter longevity. These lifters have a lightweight check valve disk that allows for quicker response, resulting in increased engine speed before valve float.
( 153 )
$14.95
COMP Cams rocker arm adjusting nuts are designed for the ultimate in strength and locking force. They are precision-ground for minimum runout and are tapered for extra strength in the locking area. The special alloys in the polylocks ensure a quality and strength not found in any other competitive products.
( 142 )
$6.95
—
$14.95
Initial startup is the most critical time in the life of any camshaft. COMP Cams Pro Cam lube can break in your camshafts properly. This lube must be spread generously on all lobes of the cam, the bottom of the lifters, and the distributor gear when installing a cam. This is the instant protection that you need to guard against any premature wear.
( 94 )
$8.95
COMP Cams offers a complete line of valve seals, from the stock GM O-rings to the positive-stop PTFE seals. They are a must to keep unwanted oil from entering the combustion chamber through the clearance in the valve guides. The O-ring seals use the standard retainer and oil splash shield. The umbrella seals are normally used when a larger-than-stock diameter spring is used. In the case of a double spring, the positive stop PTFE seals are used. For triple-spring applications, use the smaller-diameter Viton® seals.
( 190 )
$6.95
—
$14.95
COMP Cams roller lifter link bars are designed to replace your worn or damaged link bars, when fitted to COMP Cams roller lifters. They are precision-crafted from stainless steel and wear-coated for a long life in all applications.
( 1 )
$14.95
In today's higher rpm engines, the tip of the valve stem is subjected to a tremendous pounding. The best solution to this problem is COMP Cams' lash caps. These hardened lash caps are precision-machined and ground perfectly flat, to maintain accurate valvetrain adjustment.
( 30 )
$8.95
—
$11.95
COMP Cams offers these decals in a wide variety of sizes and designs to help you show your support for the leader in valvetrain technology.
( 2 )
$6.95
—
$7.95
COMP Cams rocker arm hold-down bolts are designed to secure your bolt-down, pedestal mounted roller rockers. They are fully rollerized at the roller tip and trunion, and have a black oxide coating applied for corrosion resistance. The bolts are available in different thread sizes and styles, so they're sure to have a set to fit your specific engine combinations.
( 9 )
$2.95
—
$6.95
Valve springs are one of the most critical and overlooked components in your engine. They must be matched to your cam in order for the engine to reach its full potential. It does absolutely no good to install a cam that will perform up to 8,000 rpm if you do not have the correct springs. Use the only valve springs that will give the recommended spring pressure with the valve both on the seat and at maximum lift. COMP Cams valve springs are offered in single and dual styles to meet your cam requirements.
( 273 )
$6.95
—
$14.95
COMP Cams rocker arm replacement components consist of necessary items like rocker arm stands, retaining rings, adjusting nuts, screws, pedestals, shafts, bearings, trunnions, and bolts. These items are essential to proper rocker arm maintenance and performance. Order the parts needed for your vehicle application.
( 1 )
$6.95
—
$14.95
COMP Cams pushrod guideplates are necessary in high-rpm motors. They keep your pushrods in line with your lifter cups and rocker arms—and prevent deflecting or walking sideways. The guideplates are hardened to prevent premature wear. They're available in sizes and styles for fitment on a variety of engine applications.
( 180 )
$8.95
—
$14.95
Replace your stock rocker arm studs with these COMP Cams rocker arm studs. The Magnum series studs work well in applications with moderate lifts and spring pressures. These studs have thin jam nuts for rocker clearance, rolled threads for maximum contact, and ground-flat tops to achieve and maintain accurate valve adjustments. The jam nuts are large in diameter to spread the load over larger areas. COMP Cams studs have generous radii and feature a black oxide finish.
( 24 )
$11.95
—
$13.95
COMP Cams offers replacement timing cover gaskets for a variety of applications. Made from top-quality materials, they ensure a leak-free seal.
( 2 )
$14.95
COMP Cams High Energy pushrods are your best choice when building an engine for your street rod, RV, or everyday driver. COMP Cams High Energy pushrods are manufactured to meet or exceed all original equipment specifications for pushrods. They will mate perfectly with High Energy or Magnum rockers.
( 240 )
$8.95
—
$15.95
COMP Cams offers Xtreme Energy DLC solid flat tappet lifters for a wide range of vehicles, including many Buick, Cadillac, Chevrolet, Oldsmobile, Ford, Chrysler, AMC, and Pontiac models from the 1950s, '60s, '70s, and '80s. They are quality yet inexpensive performance-proven lifters available in hydraulic and solid for multiple applications. The tappets feature a Diamond-Like Coating (DLC) face that forms an extremely hard, tough, and high-lubricity surface to reduce friction at the cam lobe/lifter interface, extending lifter and camshaft life significantly. Additional details: * DLC: Diamond-Like Carbon * Wear-resistant * High lubricity * Cast iron and steel camshaft compatible * Outstanding performance in Spintron durability testing simulation of an entire racing season * Excellent alternative to hard-to-find standard lifters
Not Yet Reviewed
$9.95
COMP Cams replacement rocker arm bearings are here to help you convert your stock rocker arm into a captured roller trunnion for race applications. They are designed with the increased stability and stiffness that are necessary when working with high-horsepower race applications and are NASCAR spec-proven. If you've purchased a retro-fit trunnion kit, COMP Cams has the replacement pieces you need to keep your engine in perfect working order.
Not Yet Reviewed
$9.95
COMP Cams Super valve locks are wider-angled 10 degree locks. They distribute the ever-increasing valve spring loads over the retainer better than typical 7 degree locks by reducing the chance of "pull-through" failure. They are precision-machined for accuracy and are available for many popular valve sizes with or without a lash cap recess. Super valve locks will fit any COMP Cams 10 degree retainer and are recommended for all race applications due to their superior strength.
( 128 )
$7.95
—
$12.95
COMP Cams race locks are designed for stock or performance engines using 7 degree valve locks. They are manufactured from machined steel and offer excellent valve spring location, so it is not necessary to change to a 10 degree retainer. Whether you're rebuilding a stock engine or changing to valve springs that have more seat pressure, COMP Cams Race valve locks will provide the reliability that you've been looking for.
( 29 )
$6.95
—
$7.95
COMP Cams Xtreme Energy DLC hydraulic flat tappet lifters are quality yet inexpensive performance-proven lifters available in hydraulic and solid for multiple applications. These tappets feature a Diamond-Like Coating (DLC) face that forms an extremely hard, tough, and high-lubricity surface to reduce friction at the cam lobe/lifter interface, extending lifter and camshaft life significantly. The lifters maintain the excellent performance expected of a COMP product and are available for Chevrolet, Buick, Cadillac, Pontiac, Oldsmobile, Ford, Chrysler, and AMC applications requiring flat tappets. Additional details: * DLC: Diamond-Like Carbon * Wear-resistant * High lubricity * Cast-iron and steel camshaft compatible * Outstanding performance in Spintron durability testing simulation of an entire racing season * Excellent alternative to hard-to-find standard lifters
( 1 )
$8.95
New valve springs with larger diameters require new retainers to handle the higher pressures developed by the springs. COMP Cams valve spring retainers are the solution. Precision-machined, these retainers are specifically designed for positive location when combined with COMP Cams' valve springs. They're available for single, double and triple-spring applications.
( 164 )
$11.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
