Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
COMP Cams Computer-Controlled Camshafts
COMP Cams computer-controlled camshafts are specifically designed for the serious street performance enthusiast. Whether it's for a street rod or a show car with power accessories, one of these cams will fit your engine's needs.
( 47 )
$531.95
—
$549.95
COMP Cams Open Wheel Modified Traction Control Camshafts
The industry-leading camshaft designers at COMP Cams set out to engineer a camshaft specifically for the requirements of open wheel modified racers. They had to take on the daunting task of building maximum horsepower, while still taking into consideration the tire restrictions, chassis technology, engine combinations, and common rule packages found in open wheel modified racing sanctioning bodies, such as IMCA. The Open Wheel Modified Traction Control Camshaft Series is comprised of 10 solid flat tappet and mechanical roller grinds for small block Chevys. These powerful camshafts are separated into four categories, each of which is optimized for open wheel modified racing. A combination of proven camshaft design technologies and the most innovative and aggressive lobe profiles in the industry has produced camshafts that deliver an extremely wide powerband, pulling hard off the corner and all the way down the straightaway. A further benefit of the broad horsepower curve of these cams is that they minimize tire spin, creating legal traction control. These innovative grinds have been extensively track-tested, and they have been proven to run faster than any camshaft that has ever been tested for this type of racing. COMP Cams OWM T/C Series offers a cam for just about every open wheel modified racer.
Not Yet Reviewed
$574.95
COMP Cams Computer-Controlled Cam and Lifter Kits
COMP Cams computer-controlled cam and lifter kits are specifically designed for the serious street performance enthusiast. Whether it's for a street rod or a show car with power accessories, one of these kits will fit your engine's needs.
( 9 )
$587.95
COMP Cams Evolution Series Hydraulic Roller Lifters
COMP Cams Evolution Series hydraulic roller lifters with Hydraulic Cartridge Technology (HCT) are revolutionary patented tappets. A combination of a self-contained hydraulic cartridge within a thick-wall lifter body and accompanying reduced oil volume that is less effected by oil aeration delivers the most consistent bleed rates between each lifter on the market. The smaller volume within the hydraulic cartridge creates one of the most responsive and quietest lifters on the market today. Startup noise is greatly reduced, and a precision-controlled bleed down rate ensures excellent performance at high RPM. The cartridge design also allows for an incredibly stiff lifter body, greatly reducing body distortion and further ensuring consistent hydraulic performance. The patented HCT tappets are a completely new design that was developed specifically by COMP Cams to meet the demanding performance and durability required for modern street and performance street engines. The HCT and proprietary manufacturing processes of these lifters ensure precision and longevity that exceed any lifter on the market. Other features include increased duration and lift to the camshaft and two oiling features. Another industry first is the fact that the hydraulic element of this patented lifter is serviceable, allowing anyone to rebuild lifters in his or her own garage. Order the Evolution lifters recommended for your year/make and engine application.
( 15 )
$548.95
—
$726.95
COMP Cams Ultra Pro Magnum Rocker Arms
Utilizing years of valvetrain design experience, the latest FEA stress analysis technology, and an exhaustive testing regiment (dyno and Spintron), COMP Cams engineering team left no detail to chance. Everything from casting techniques to valve spring clearance was scrutinized to ensure that Ultra Pro Magnum rocker arms not only lived up to the lofty standards of their predecessor, but also took stud mount rocker performance, stability, and value to a whole new level. The most noticeable advancement centers around their nearly unbreakable investment cast 8650 chromoly body. The arched, web-like design delivers a nearly 29 percent increase in strength and rigidity, while reducing the moment of inertia and optimizing the dynamic balance. The resulting rockers maximize lift and valvetrain control at high rpm. The increased retainer and valve spring clearances of the new design enable the use of large-diameter valve springs, retainers, and locks, without clearance or fitment issues. The new black oxide exterior finish offers a distinctive appearance, along with long-term corrosion resistance. The COMP Cams Ultra Pro Magnum rocker arms feature an oversized trunnion and precision-sorted needle bearings designed for use with high-load valve springs. These unique rockers also feature hardened roller tips for reduced friction and elimination of the valve stem "side loading" that causes premature valve guide wear.
( 207 )
$541.95
—
$622.95
COMP Cams Max-Lift BSR Shaft Rocker Systems
COMP Cams introduces another industry first with their Max-Lift BSR shaft rocker systems, a bolt-in bushed shaft rocker system that increases valve train stiffness helping your engine achieve higher levels of performance. By tying all eight rocker arms together on a single shaft that fits in the stock rocker stand, COMP Cams has found a way to improve valve train dynamics, increase valve train stiffness and reduce deflection under extreme loads. The increased valve train stiffness created the BSR rocker system allows your existing cam to act like a larger camshaft by transferring more of the motion to the valve or the use of more aggressive, higher lift cams without losing control of the valve train. Take complete control of your valves with the COMP Cams Max-Lift BSR shaft rocker system.
( 5 )
$731.95
COMP Cams Tri-Power Xtreme Camshafts
COMP Cams Tri-Power Xtreme camshafts have been designed to work with the FAST-FLASH programmers to optimize torque and horsepower and improve fuel efficiency. They are available for late model, fuel injected, computer-controlled engines. The COMP Cams Tri-Power Xtreme camshafts work with a standard valvetrain, and require no modifications to install.
Not Yet Reviewed
$531.95
—
$579.95
COMP Cams HRT Stage 2 Camshafts
COMP Cams HRT Stage 2 camshafts use the newest and most advanced lobe designs in order to produce some of the highest average power and torque available. The "Low Shock Technology" features lobe profiles designed to maximize horsepower while improving stability at higher engine speeds. These profiles are also easier on the valve springs, enhancing durability and reducing load loss. These new HRT camshafts receive the Micro Surface Enhancement (MSE) finishing process as a standard feature, which increases strength and performance by reducing surface peak roughness and provides a 250 percent improvement in the effective load bearing area, allowing for much higher loads.
( 1 )
$579.95
—
$605.95
COMP Cams Xtreme Energy Camshafts
COMP Cams Xtreme Energy camshafts employ the latest cam technology to provide maximum performance. Whether your use is off-roading, towing, or street performance, there's an Xtreme Energy cam available for you. By using an aggressive lobe profile, these cams provide better throttle response and more top-end horsepower than equivalent cams from other manufacturers—while delivering increased engine vacuum. Hundreds of models are available for fitment on vehicles from 1955 to the present. Select the cam designed for your application.
( 345 )
$531.95
—
$742.95
COMP Cams Magnum Hydraulic Roller Camshafts
COMP Cams Magnum hydraulic roller camshafts are designed for everyone from the serious street performance enthusiast to the all-out competition drag racer. Whether you're driving a street rod or show car with power accessories, or a super gas, super competition car on alcohol, one of these cams will fit your engine's needs.
( 17 )
$549.95
COMP Cams High Energy Camshafts
COMP Cams High Energy camshafts are designed for street engines with an 8:1 to 9:1 compression ratio. They also work well with all stock components, including intakes, exhaust manifolds, and carburetors. These cams offer an increase in both gas mileage and power throughout the rpm range for most street applications.
( 63 )
$549.95
COMP Cams Godzilla Hydraulic Roller Camshafts
COMP Cams Godzilla hydraulic roller camshaft upgrades are designed to provide amazing drivability and throttle response, while producing increased torque across the entire RPM range with a significant horsepower bump with minimal effort. They're available in three distinct models: * Stage 1 NSR/NTR model: Utilizes the full phaser sweep for excellent mileage and optimized performance, without compromising durability. They requires no adjustment to the factory cam phasing or ignition timing without the need for a limiter. However, minimal ECU tuning may be required to meet the maximum potential. Testing with an optimized tune resulted in over 60 hp and 15 lbs.-ft. over stock with a much broader torque curve—impressive gains with minimal effort and zero compromise. * Stage 2 NSR model: Maintaining use of the phaser with a limiter kit allows these camshafts to also produce incredible horsepower. They offer maximum torque in the low- to mid-range for heavy vehicles and towing. Stage 2 cams deliver an increase of over 75 lbs.-ft. of torque at 3,000 rpm! They require a phaser limiter (P/N 5473). Testing with the phaser limiter kit resulted in gains of more than 75 hp over stock. One look at the torque curve produced by this camshaft will have your tires crying for mercy. * Stage 3 model: Godzilla Stage 3 camshafts are made for crate engines and engine swaps into lighter vehicles and those seeking maximum horsepower while still utilizing the phaser with a limiter kit. These cams bring the exhaust note that is worthy of the Godzilla name. They will produce well over 600 hp on pump gas! Awesome power can be expected, from 5,000 to 6,700 rpm with the valve spring kit (P/N 7230GCS-KIT) and a phaser limiter (P/N 5473). Testing with the phaser limiter kit resulted in gains of nearly 100 hp and 25 lbs.-ft. over stock. This much horsepower will make even Godzilla fly.
Not Yet Reviewed
$677.95
COMP Cams Xtreme Energy Cam and Lifter Kits
COMP Cams Xtreme Energy cam and lifter kits are built to take advantage of the latest cam technology and provide maximum performance. Whether your use is off-roading, towing, or street performance, there are Xtreme Energy options available for you. By using an aggressive lobe profile, they provide better throttle response and more top-end horsepower than equivalent kits from other manufacturers, while delivering increased engine vacuum. Order the model designed for your vehicle and engine application.
( 392 )
$570.95
—
$589.95
COMP Cams Chrysler Hemi Phaser Camshafts
COMP Cams Chrysler Hemi phaser camshafts utilize Variable Valve Timing (VVT) technology to maximize power and performance in stock and street/strip applications. The new Hemi engines from Chrysler are great power plants straight from the factory, with technology that allows the camshafts to move in real time. Instead of scrapping this advanced system, COMP Cams has embraced it with a new line of aftermarket Hemi-specific cams. The patent-pending Hemi phaser camshafts work with phaser limiters or locks to fully utilize Chrysler's Variable Valve Timing (VVT) technology, which allows them to pick up torque in the low end of the engine, while maintaining power up high. Made from a billet core, these hydraulic roller cams are engineered tough enough to handle 5.7L and 6.4L Hemi street/strip engines. Their unique, no-springs-required design maintains piston-to-valve clearance, while enabling high performance lobes utilizing VVT, making them perfect for late model Dodge Challengers, Dodge Chargers, Chrysler 300s, Jeeps, Dodge trucks, and Mopar crate engines with VVT. COMP Cams Chrysler Hemi phaser camshafts are available as both custom and three different off-the-shelf grinds, dependent upon engine type, for improved performance over OEM options. They will require the COMP Cams phaser limiter or lock kits to limit the degree of maximum cam phasing to 14 crank degrees (7 cam degrees) and they are available separately.
( 5 )
$605.95
COMP Cams HRT Stage 1 Camshafts
COMP Cams HRT Stage 1 camshafts use the newest and most advanced lobe designs in order to produce some of the highest average power and torque available. The "Low Shock Technology" features lobe profiles designed to maximize horsepower while improving stability at higher engine speeds. These profiles are also easier on the valve springs, enhancing durability and reducing load loss. COMP Cams HRT camshafts receive the Micro Surface Enhancement (MSE) finishing process as a standard feature, which increases strength and performance by reducing surface peak roughness and provides a 250 percent improvement in the effective load bearing area, allowing for much higher loads. All HRT Stage 1 camshafts do not require upgraded valve springs.
( 1 )
$579.95
—
$605.95
COMP Cams Xtreme Fuel Injected Camshafts
COMP Cams Xtreme fuel injected camshafts are designed for late model applications. Ground using faster-opening and more efficient ramp profiles, Xtreme camshafts are engineered for 1.6 ratio rocker arms and beehive valve springs, which provide a dramatic increase in torque and horsepower.
( 29 )
$522.95
—
$579.95
COMP Cams HRT Stage 3 Camshafts
COMP Cams HRT Stage 3 camshafts use the newest and most advanced lobe designs in order to produce some of the highest average power and torque available. The "Low Shock Technology" features lobe profiles engineered to maximize horsepower while improving stability at higher engine speeds. These profiles are also easier on the valve springs, enhancing durability and reducing load loss. COMP Cams HRT Stage 3 cams receive the Micro Surface Enhancement (MSE) finishing process as a standard feature to increase strength and performance by reducing surface peak roughness. This also provides noticeable improvement in the effective load bearing area, thus allowing for much higher loads. Order the model recommended for your vehicle and engine application.
( 1 )
$579.95
—
$605.95
On Sale
COMP Cams Thumpr Hydraulic Roller Camshafts
COMP Cams has awakened the muscle car sound--and it is nastier than ever! Thumpr Series camshafts is a line of cutting-edge hydraulic roller camshafts for engines originally equipped with flat tappet cams. With them, you can expect a substantial power increase without sacrificing reliability or ease of maintenance! The lobe profile and grind characteristics of Thumpr cams include blending an early exhaust valve opening, a long exhaust duration, and a generous amount of intake and exhaust overlap. This maximizes rough-idling tendencies, delivering a seriously aggressive exhaust note without affecting engine power output. Thumpr camshafts are available in a variety of grind profiles, each producing impressive horsepower and torque performance within a different rpm range.
( 17 )
$549.95
On Sale
COMP Cams LSR Series Hydraulic Roller Camshafts
COMP Cams LSR Series hydraulic roller camshafts feature modern lobe profiles that take full advantage of high-flowing late model GM LS3 rectangular port cylinder heads. They are tailored for a specific rpm range and usage, from torque to high-rpm horsepower. Give your Chevy LS3 engine a shot in the arm with one of these COMP Cams LSR Series hydraulic roller camshafts.
( 26 )
$541.95
—
$566.95
COMP Cams Nitrous HP Camshafts
COMP Cams Nitrous HP camshafts are designed to work with your nitrous system to get more power from your engine. Their unique intake lobes allow your engine cylinders to fill better, for more complete combustion. Meanwhile, their exhaust lobes are spread to decrease overlap and ensure maximum scavenging of your combustion chamber. The bottom line is an increased power boost from your nitrous system, without any loss of throttle response or torque in street applications.
( 12 )
$549.95
COMP Cams XFI AFM GM Gen IV Camshafts
COMP Cams XFI AFM GM Gen IV camshafts are designed to work with the VVT (variable valve timing) and AFM (active fuel management) components of GM V8 engines. They deliver outstanding top-end power in modified L99-style applications without sacrificing low-end power when properly programmed. Get an increase in performance with the lobe profile of COMP Cams XFI AFM GM Gen IV camshafts.
( 1 )
$649.95
On Sale
COMP Cams FSL Hydraulic Roller Camshafts
COMP Cams FSL hydraulic roller camshafts offer drop-in convenience—with no valve spring changes or computer tuning required—for the LS3 engine family. The FSL cams provide proven 32 rwhp improvement without the risk of non-compliance with emissions regulations. COMP Cams FSL hydraulic roller camshafts work with stock components and a stock tune to produce an increase in peak power. Order the model designed for your vehicle/engine application.
( 1 )
$541.95
—
$649.95
On Sale
COMP Cams XFI RPM Camshafts
COMP Cams XFI RPM camshafts pull your performance set up all together. Offering the newest and quickest lobe profiles, their selection of XFI RPM cams get you the best combination of torque, horsepower, and even gas mileage (if you want) to tailor your application. Make the right choice in valvetrain technology; you have a goal and so does COMP Cams--reliable high performance!
( 16 )
$523.99
COMP Cams Turbo and Blower HRT Camshafts
Comp Cams turbo and blower HRT camshafts are available in a variety of mild-to-aggressive styles. These replacement hydraulic roller tappet models work with your blower, turbo, or supercharger to help provide the most power possible. Choose the grind and options needed for your vehicle and engine application.
( 1 )
$579.95
—
$605.95
