Availability
To make the most power from your engine, you need to optimize the air ingested and captured by avoiding valves closing too soon or too late. COMP Cams 4-pattern hydraulic roller camshafts are the first series of cams designed to accommodate a difference in runner length and avoid valves closing at the wrong times. Any conventional center-layout single throttle body or carbureted V8 intake manifold features longer outboard runners and shorter inboard runners, meaning that each valve event should occur at a different moment. COMP Cams has designed a series of cams that optimizes valve events and features a large increase in both area under the curve and stability at high rpm. They feature four different lobe patterns with one intake and exhaust design for outboard runners and another intake and exhaust design for the inboard runners. While the four central cylinders are all the same grinds, the outboard exhaust openings are two degrees earlier, with outboard intake closings coming two degrees later. NASCAR has been utilizing this technology for years. COMP Cams is now applying this same knowledge in street vehicles to balance air/fuel ratio per cylinder. These cams are CNC-ground from steel billet cores. They feature cast iron distributor gears and utilize a series of lobes with over .600 in. valve lift and stability up to 7,500 rpm, all while providing more consistent cylinder to cylinder torque. They also feature tight lobe separation for both excellent power and a throaty sound. Designed for small block Chevy, big block Chevy, and small block Ford carbureted or fuel injected applications, the design is exclusive and unique to COMP Cams.
( 4 )
$649.95
COMP Cams is bringing the muscle car sound back, and it's nastier than ever! Let's face it--few things serve to grab our attention at a car show or cruise night more than a car with a thumping, high performance idle. In an ongoing quest to provide you with the performance and sound you demand, COMP Cams engineering team proudly introduces the Thumpr Series cam and lifter kits. The lobe profile and grind characteristics of these Thumpr camshafts use a combination of an early exhaust valve opening, a long exhaust duration, and a generous amount of intake and exhaust overlap to maximize the rough-idling characteristics of the cams. This gives you a seriously aggressive exhaust note without negatively impacting the power output or streetability of the engine. Thumpr camshafts are available in different grind profiles; each one will produce a rough, racy exhaust note and impressive amounts of horsepower and torque within a different rpm range. Thumpr Series cam and lifter kits deliver a substantial power increase over an identical hydraulic flat tappet grind without sacrificing reliability or ease of maintenance.
( 212 )
$587.95
—
$747.95
Increase your street machine's gas mileage and powerband performance! COMP Cams High Energy cam and lifter kits are designed for street engines with an 8:1 to 9:1 compression ratio. They also work well with all stock components, including intakes, exhaust manifolds, and carburetors. These kits offer good increases in both gas mileage and power throughout the rpm range for most street applications.
( 184 )
$505.95
—
$600.95
COMP Cams Big Mutha Thumpr hydraulic roller camshafts are perfect for folks looking for great performance and wild camshaft idle. The basic science behind the Thumpr cams isn't new. This cam line delivers true high performance engine sound by "tightening" the lobe separation angle of the camshaft. This, in turn, creates more overlap between exhaust and intake events, as well as more aggressive performance sound. Available in different grind profiles, each Thumpr cam produces impressive horsepower and torque performance within a different RPM range. If you're looking for a cam that makes your engine sound meaner than it is, the COMP Cams Big Muthra Thumpr cams could be the right call. Order the model recommended for your year/make and engine application.
( 2 )
$549.95
COMP Cams has awakened the muscle car sound--and it is nastier than ever! Thumpr Series camshafts is a line of cutting-edge hydraulic roller camshafts for engines originally equipped with flat tappet cams. With them, you can expect a substantial power increase without sacrificing reliability or ease of maintenance! The lobe profile and grind characteristics of Thumpr cams include blending an early exhaust valve opening, a long exhaust duration, and a generous amount of intake and exhaust overlap. This maximizes rough-idling tendencies, delivering a seriously aggressive exhaust note without affecting engine power output. Thumpr camshafts are available in a variety of grind profiles, each producing impressive horsepower and torque performance within a different rpm range.
( 17 )
$541.95
—
$739.95
COMP Cams is bringing back the musclecar sound—and it's nastier than ever! Few things grab our attention at a car show or cruise night more than a car with a thumping high performance idle. In an ongoing quest to provide you with the performance and sound you demand, COMP Cams' engineering team proudly introduces the Thumpr retrofit hydraulic roller camshafts. They are a series of camshafts designed for use in engines that were originally equipped with flat tappet camshafts. The lobe profile and grind characteristics use a combination of an early exhaust valve opening, a long exhaust duration, and a generous amount of intake and exhaust overlap to maximize the rough-idling characteristics of the cams. They give you a seriously aggressive exhaust note without negatively impacting the power output or streetability of the engine. Thumpr camshafts are available in three different grind profiles. Each one will produce a rough, racy exhaust note and impressive amounts of horsepower and torque within a different rpm range. COMP Cams Thumpr Series camshafts feature a cutting-edge hydraulic roller design that delivers a substantial power increase over identical hydraulic flat tappet grinds—without sacrificing reliability or ease of maintenance.
( 34 )
$531.95
—
$579.95
On Sale
COMP Cams High Energy camshafts are designed for street engines with an 8:1 to 9:1 compression ratio. They also work well with all stock components, including intakes, exhaust manifolds, and carburetors. These cams offer an increase in both gas mileage and power throughout the rpm range for most street applications.
( 62 )
$549.95
—
$579.95
On Sale
COMP Cams Nitrous HP retrofit camshafts are designed to work with your nitrous system to get more power from your engine. Their unique intake lobes allow your engine cylinders to fill better, for more complete combustion. Meanwhile, their exhaust lobes are spread to decrease overlap and ensure maximum scavenging of your combustion chamber. The bottom line is an increased power boost from your nitrous system without any loss of throttle response or torque in street applications.
( 5 )
$549.95
On Sale
COMP Cams Nitrous HP camshafts are designed to work with your nitrous system to get more power from your engine. Their unique intake lobes allow your engine cylinders to fill better, for more complete combustion. Meanwhile, their exhaust lobes are spread to decrease overlap and ensure maximum scavenging of your combustion chamber. The bottom line is an increased power boost from your nitrous system, without any loss of throttle response or torque in street applications.
( 12 )
$549.95
COMP Cams is bringing the musclecar sound back, and it's nastier than ever! Few things serve to grab our attention at a car show or cruise night more than a car with a thumping, high performance idle. In an ongoing quest to provide you with the performance and sound that you demand, COMP Cams' engineering team proudly introduces the Thumpr Series hydraulic roller cam and lifter kits. They are designed for use in engines that were originally equipped with flat tappet camshafts. The lobe profile and grind characteristics of these Thumpr camshafts use a combination of an early exhaust valve opening, a long exhaust duration, and a generous amount of intake and exhaust overlap. They're designed to maximize the rough-idling characteristics of the cams, giving you a seriously aggressive exhaust note without negatively impacting the power output or streetability of the engine. They are available in three different grind profiles. Each one will produce a rough, racy exhaust note and impressive amounts of horsepower and torque within a different rpm range. Thumpr Series cam and lifter kits feature a cutting-edge hydraulic roller design that delivers a substantial power increase over an identical hydraulic flat tappet grind without sacrificing reliability or ease of maintenance.
( 17 )
$816.95
From moderate street racing to serious racing, COMP Cams Thumpr mechanical flat tappet camshafts offer increased rpm and aggressiveness to keep you out in front. Three unique cam designs--Thumpr, Mutha' Thumpr and Big Mutha' Thumpr--deliver excellent horsepower gains and broad torque curves for your musclecar and street rods. The Thumprs' early intake valve opening and long exhaust duration create optimum overlap for a powerful, hard-hitting exhaust note. If you like to be heard, COMP Cams Thumpr camshafts are for you.
Not Yet Reviewed
$656.95
Revolutionary COMP Cams XFI AFM GM Gen V camshafts are designed to work with the direct-injection, VVT (variable valve timing), and AFM (active fuel management) lifters featured in GM's Gen V (LT1/L83/L86) V8 engine. They feature four different lobe profiles to both create AFM compatibility and optimize intake and exhaust valve opening/closing events. The camshafts increase torque and horsepower throughout the entire rpm range, while providing excellent responsiveness and midrange power over stock for across-the-board gains. The COMP Cams XFI AFM GM Gen V camshafts require the COMP Cams phaser limiter kit (sold separately), which limits the range of camshaft movement from 62 to 22 crank degrees, thus requiring PCM tuning.
( 3 )
$574.95
COMP Cams Nitrous HP cam and lifter kits are designed to work with your nitrous system to get more power from your engine. The unique intake cam lobes allow your engine cylinders to fill better for more complete combustion. While, the exhaust lobes are spread to decrease overlap and ensure maximum scavenging of your combustion chamber. The bottom line is an increased power boost from your nitrous system, without any loss of throttle response or torque in street applications.
( 5 )
$816.95
COMP Cams Xtreme RX oval track roller camshafts are the way to go for maximum performance with reduced friction. These roller cams use COMP's RX intake and RZ exhaust profiles to provide the ultimate in high-rpm power and durability! COMP Cams Xtreme RX oval track roller cams are available in standard and custom grinds to meet your needs.
Not Yet Reviewed
$531.95
COMP Cams Evolution Series hydraulic roller lifters with Hydraulic Cartridge Technology (HCT) are revolutionary patented tappets. A combination of a self-contained hydraulic cartridge within a thick-wall lifter body and accompanying reduced oil volume that is less effected by oil aeration delivers the most consistent bleed rates between each lifter on the market. The smaller volume within the hydraulic cartridge creates one of the most responsive and quietest lifters on the market today. Startup noise is greatly reduced, and a precision-controlled bleed down rate ensures excellent performance at high RPM. The cartridge design also allows for an incredibly stiff lifter body, greatly reducing body distortion and further ensuring consistent hydraulic performance. The patented HCT tappets are a completely new design that was developed specifically by COMP Cams to meet the demanding performance and durability required for modern street and performance street engines. The HCT and proprietary manufacturing processes of these lifters ensure precision and longevity that exceed any lifter on the market. Other features include increased duration and lift to the camshaft and two oiling features. Another industry first is the fact that the hydraulic element of this patented lifter is serviceable, allowing anyone to rebuild lifters in his or her own garage. Order the Evolution lifters recommended for your year/make and engine application.
( 12 )
$726.95
COMP Cams Xtreme Energy modular 2-valve camshafts are specifically created for high-demanding, overhead-camshaft engine configurations. From stock replacements to ultimate performance, there is an Xtreme Energy cam to meet your performance goals.
( 20 )
$838.95
COMP Cams Xtreme Energy retrofit camshafts are built to take advantage of the latest cam technology—and provide maximum performance. Whether your use is off-roading, towing, or street performance, there is an Xtreme Energy cam available for you. By using an aggressive lobe profile, these hydraulic roller tappet cams provide better throttle response, engine vacuum, and top-end horsepower than equivalent cams from other manufacturers. Choose the model and options designed for your engine application.
( 59 )
$531.95
—
$579.95
On Sale
COMP Cams Xtreme Energy camshafts employ the latest cam technology to provide maximum performance. Whether your use is off-roading, towing, or street performance, there's an Xtreme Energy cam available for you. By using an aggressive lobe profile, these cams provide better throttle response and more top-end horsepower than equivalent cams from other manufacturers—while delivering increased engine vacuum. Hundreds of models are available for fitment on vehicles from 1955 to the present. Select the cam designed for your application.
( 339 )
$579.95
On Sale
COMP Cams Magnum hydraulic roller camshafts are designed for everyone from the serious street performance enthusiast to the all-out competition drag racer. Whether you're driving a street rod or show car with power accessories, or a super gas, super competition car on alcohol, one of these cams will fit your engine's needs.
( 17 )
$549.95
On Sale
COMP Cams LSR Series hydraulic roller camshafts feature modern lobe profiles that take full advantage of high-flowing late model GM LS3 rectangular port cylinder heads. They are tailored for a specific rpm range and usage, from torque to high-rpm horsepower. Give your Chevy LS3 engine a shot in the arm with one of these COMP Cams LSR Series hydraulic roller camshafts.
( 26 )
$541.95
A car with thumping, high performance idle is sure to grab your attention. COMP Cams is bringing the muscle car sound back, and it's nastier than ever with their Big Mutha' Thumpr hydraulic flat tappet cam and lifter kits. With the meanest sound in the Thumpr line, Big Mutha' street/strip kits produce a very rough idle. And you can rest assured that the aggressive muscle car attitude of your Thumpr-equipped car will be backed up by proven horsepower performance. The kts include camshaft, a set of matched lifters, assembly lube, decals, and instructions.
( 15 )
$576.95
On Sale
COMP Cams XFI RPM high-lift cams have been designed to increase horsepower and extend the rpm range of your engine. Made for applications where a high-lift is necessary, these cams have the power to help you meet your performance goals.
( 3 )
$541.95
On Sale
COMP Cams oval track camshafts are designed specifically for racing applications. They are available to complement a variety of engine configurations, track lengths, and conditions--simply order the model that fits the needs of your particular make and model. Before you start the next oval track race, install the winning camshaft edge from COMP Cams.
( 19 )
$531.95
COMP Cams Sportsman solid roller lifters feature premium-quality, high-value components designed for sportsman and professional racing, along with high-end street machines. They're available in both needle-bearing and bushing configurations. Each design features two pressurized EDM oil feeds, as well as an edge-orifice feed to the wheel. This delivers a more reliable oil feed than most competing options. COMP Cams Sportsman solid roller lifters are also designed with a shallower oil band than competitors' versions for increased strength and rigidity, while internal machining helps to reduce weight. The body utilizes a skirted wheel that strengthens the lifter ears, and the skirt also provides more contact area with the lifter bore for further lifter stabilization. In addition, staked axles eliminate clips and provide robust axle retention. This feature increases the stiffness of the lifter ears and helps to prevent the ears from spreading. The COMP Cams Sportsman solid roller lifters are built from 8620 premium steel for increased strength and wear resistance and they feature a captured, stainless steel link bar design. The lifters also utilize a tapered and slotted link bar tower for reduced weight and improved aesthetics. Choose the size and options tailored for your engine application.
( 9 )
$833.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
