Availability
Prevent cam damage from fuel pump lobe wear. COMP Cams has a reputation for being a problem solver. When a high-pressure fuel pump is run with a steel roller cam core, the stock fuel pump pushrod is not compatible with the steel core. You can damage an expensive roller cam as a result of wear at the fuel pump lobe. COMP Cams offers several fuel pump pushrods in response to this problem.
( 76 )
$52.95
COMP Cams melonized distributor gears are designed to provide universal compatibility for any steel, cast iron, or ductile iron camshaft—but without the wear concerns of bronze options. They're less prone to wear, and feature better timing accuracy and higher strength than any other universally compatible distributor gears. Choose the shaft distributor diameter for your particular vehicle.
( 60 )
$103.95
—
$118.95
COMP Cams Xtreme Energy DLC hydraulic flat tappet lifters are quality yet inexpensive performance-proven lifters available in hydraulic and solid for multiple applications. These tappets feature a Diamond-Like Coating (DLC) face that forms an extremely hard, tough, and high-lubricity surface to reduce friction at the cam lobe/lifter interface, extending lifter and camshaft life significantly. The lifters maintain the excellent performance expected of a COMP product and are available for Chevrolet, Buick, Cadillac, Pontiac, Oldsmobile, Ford, Chrysler, and AMC applications requiring flat tappets. Additional details: * DLC: Diamond-Like Carbon * Wear-resistant * High lubricity * Cast-iron and steel camshaft compatible * Outstanding performance in Spintron durability testing simulation of an entire racing season * Excellent alternative to hard-to-find standard lifters
( 1 )
$60.95
—
$112.95
Valve springs are one of the most critical and overlooked components in your engine. They must be matched to your cam in order for the engine to reach its full potential. It does absolutely no good to install a cam that will perform up to 8,000 rpm if you do not have the correct springs. Use the only valve springs that will give the recommended spring pressure with the valve both on the seat and at maximum lift. COMP Cams valve springs are offered in single and dual styles to meet your cam requirements.
( 273 )
$50.95
—
$114.95
Building a performance street machine? COMP Cams Magnum double row timing sets are built for mild performance on the street. They have heat-treated, pre-stretched, large-pin, double-row chains for extra strength and reliability. They also have an induction hardened cast iron camshaft gear and billet steel crank sprocket with three keyways, which allow you to set cam timing at 4 degrees advanced, 4 degrees retarded, or normal. In addition, all COMP Cams Magnum double row timing sets are dynamically balanced for smoother operation.
( 113 )
$83.95
COMP Cams rocker arm adjusting nuts are designed for the ultimate in strength and locking force. They are precision-ground for minimum runout and are tapered for extra strength in the locking area. The special alloys in the polylocks ensure a quality and strength not found in any other competitive products.
( 142 )
$54.95
—
$109.95
New valve springs with larger diameters require new retainers to handle the higher pressures developed by the springs. COMP Cams valve spring retainers are the solution. Precision-machined, these retainers are specifically designed for positive location when combined with COMP Cams' valve springs. They're available for single, double and triple-spring applications.
( 164 )
$52.95
—
$110.95
COMP Cams pushrod guideplates are necessary in high-rpm motors. They keep your pushrods in line with your lifter cups and rocker arms—and prevent deflecting or walking sideways. The guideplates are hardened to prevent premature wear. They're available in sizes and styles for fitment on a variety of engine applications.
( 180 )
$57.95
—
$81.95
In today's higher rpm engines, the tip of the valve stem is subjected to a tremendous pounding. The best solution to this problem is COMP Cams' lash caps. These hardened lash caps are precision-machined and ground perfectly flat, to maintain accurate valvetrain adjustment.
( 30 )
$50.95
—
$80.95
COMP Cams crankshaft sockets are the perfect addition to your engine-building toolbox. They accept 1/2 in. drive ratchets for versatility and easy engine rotation. They're precision-machined for an accurate fit over the crank snout, and their knurled retaining nut threads-on to sandwich a degree wheel in place. The nut can be loosened, while on the crank snout, so that the wheel can be turned independently of the engine when finding top dead center.
( 194 )
$59.95
—
$70.95
Building a really high performance street vehicle? COMP Cams Magnum double roller timing sets are built for maximum performance on the street. They have heat-treated, pre-stretched, large-pin, double-row chains for extra strength and reliability. They also have an induction hardened cast iron camshaft gear and billet steel crank sprocket with three keyways, which allow you to set cam timing at 4 degrees advanced, 4 degrees retarded, or normal. In addition, all COMP Cams Magnum double roller timing sets are dynamically balanced for smoother operation.
( 237 )
$78.95
—
$114.95
COMP Cams Super valve locks are wider-angled 10 degree locks. They distribute the ever-increasing valve spring loads over the retainer better than typical 7 degree locks by reducing the chance of "pull-through" failure. They are precision-machined for accuracy and are available for many popular valve sizes with or without a lash cap recess. Super valve locks will fit any COMP Cams 10 degree retainer and are recommended for all race applications due to their superior strength.
( 128 )
$54.95
—
$61.95
As with all other areas in the valvetrain, the area where the spring sits also takes a beating. The old standard shims and/or seats simply will not hold up to the extreme pressures and high rpm found in today's performance engines. COMP Cams valve spring locators solve this problem and eliminate failures.
( 75 )
$65.95
—
$83.95
COMP Cams High Energy pushrods are your best choice when building an engine for your street rod, RV, or everyday driver. COMP Cams High Energy pushrods are manufactured to meet or exceed all original equipment specifications for pushrods. They will mate perfectly with High Energy or Magnum rockers.
( 240 )
$51.95
—
$112.95
COMP Cams Evolution Series hydraulic roller lifters with Hydraulic Cartridge Technology (HCT) are revolutionary patented tappets. A combination of a self-contained hydraulic cartridge within a thick-wall lifter body and accompanying reduced oil volume that is less effected by oil aeration delivers the most consistent bleed rates between each lifter on the market. The smaller volume within the hydraulic cartridge creates one of the most responsive and quietest lifters on the market today. Startup noise is greatly reduced, and a precision-controlled bleed down rate ensures excellent performance at high RPM. The cartridge design also allows for an incredibly stiff lifter body, greatly reducing body distortion and further ensuring consistent hydraulic performance. The patented HCT tappets are a completely new design that was developed specifically by COMP Cams to meet the demanding performance and durability required for modern street and performance street engines. The HCT and proprietary manufacturing processes of these lifters ensure precision and longevity that exceed any lifter on the market. Other features include increased duration and lift to the camshaft and two oiling features. Another industry first is the fact that the hydraulic element of this patented lifter is serviceable, allowing anyone to rebuild lifters in his or her own garage. Order the Evolution lifters recommended for your year/make and engine application.
( 11 )
$92.95
COMP Cams phaser lockout kits allow engine builders and enthusiasts to eliminate variable valve timing in specific applications, making the installation of larger camshafts possible for bigger power gains. Phaser lockouts will help gain more piston-to-valve clearance and simplify ECU tuning.
( 1 )
$92.95
These vacuum canisters from COMP Cams capture an extra shot of vacuum from your engine for your power brakes. They are made for cars equipped with big cams and power brakes. These units approximately double the volume of vacuum available for your power brakes. They are recommended for cars with 14 in. of vacuum or less.
( 47 )
$73.99
—
$92.95
Prevent your lifters from rotating with Comp Cams retrofit lifter guides. Utilize these guides to keep the wheels of your hydraulic lifters rolling and prevent them from sliding over your cam. These "dog bones" are made from steel. Keep your lifters in line with Comp Cams retrofit hydraulic roller lifter guides.
( 3 )
$52.95
Comp Cams cam phaser limiter kits are specially designed, computer-controlled cam gears that automatically optimize camshaft timing based on the current engine rpm Engine oil is pressure-fed to the phasers through passageways in the cylinder heads and cams. The engine computers control solenoids that adjust this oil flow into and out of the phasers' control chambers, creating the ability to retard the cams. While this technology provides fuel efficiency and the ability to always be in the best position for maximum power, regardless of engine rpm, it does present some limitations when it comes to performance cams. With such a wide range of valve timing movement, there is very little piston to valve clearance, which limits you to small cam profiles with little overlap. COMP Cams cam phaser limiter kits restrict the range of cam timing movement (14 degrees for Chrysler, 20 degrees for Ford, and 22 degrees for GM), thus providing the necessary valve clearance for serious performance cams with tighter lobe separations--all while utilizing the benefits of VVT technology. Gain some serious upper rpm power without sacrificing bottom end or mid-range performance with Comp Cams cam phaser limiter kits.
( 6 )
$82.95
—
$114.95
COMP Cams lobe indicator tools are designed to measure lobe lift and base circle runout with a dial indicator (sold separately). They slide down into the lifter bore and are held there firmly with a built-in O-ring. The tools include a follower for solid and hydraulic flat tappet cams and one for roller cams. Order the model designed for your engine application.
( 18 )
$102.95
Built to outlast and outperform in accuracy and strength, Ultra Pro Magnum XD roller rocker arms are engineered from durable 8650 steel and include a machined billet pushrod seat insert for a wide range of super accurate ratios. A unique and wide ratio range to fit almost any popular application from 1.5 to 1.8 in 0.5 in. increments for Chevy and 1.6 to 1.73 for various Ford applications is available. These Ultra Pro Magnum XD rockers are fully rebuildable and boast precision-sorted needle bearings and hardened roller tips. And, they work with most diameter springs and retainers. The XD design utilizes advanced FEA and CAD design and development to improve strength, stiffness and MOI (moment of inertia) optimization for drag and circle track applications.
( 59 )
$55.95
—
$59.95
COMP Cams machined aluminum deck checkers incorporate magnets to hold itself firmly to the block for simple and accurate measurements. Mount a dial indicator (not included) in the center for deck height, or mount one indicator in each end to check piston rock.To calculate true compression ratio it's necessary to measure the distance between the deck surface of the block and the piston deck. Choose COMP Cams magnetic deck checkers to do the job.
( 1 )
$97.95
Keep your cam located with these steel thrust plate timing covers from COMP Cams. They feature a welded-in tab for use with a cam button, to help in achieving correct endplay without fabrication or modification. The covers are made from heavy-gauge steel for added strength, and topped off with a durable black powdercoated finish for long-lasting good looks. They include gaskets, a seal, and bolts for a complete installation.
( 9 )
$173.95
COMP Cams spring seat cutter (sold separately) requires the use of an arbor/pilot, which is available in different sizes. These COMP Cams arbor/pilots also work with valve guide cutters (sold separately) used for shortening the guide for a high lift cam or installing a COMP Cams PTFE seal for oil control.
( 22 )
$54.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
