Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
COMP Cams Cam Phaser Limiter Kits
Comp Cams cam phaser limiter kits are specially designed, computer-controlled cam gears that automatically optimize camshaft timing based on the current engine rpm Engine oil is pressure-fed to the phasers through passageways in the cylinder heads and cams. The engine computers control solenoids that adjust this oil flow into and out of the phasers' control chambers, creating the ability to retard the cams. While this technology provides fuel efficiency and the ability to always be in the best position for maximum power, regardless of engine rpm, it does present some limitations when it comes to performance cams. With such a wide range of valve timing movement, there is very little piston to valve clearance, which limits you to small cam profiles with little overlap. COMP Cams cam phaser limiter kits restrict the range of cam timing movement (14 degrees for Chrysler, 20 degrees for Ford, and 22 degrees for GM), thus providing the necessary valve clearance for serious performance cams with tighter lobe separations--all while utilizing the benefits of VVT technology. Gain some serious upper rpm power without sacrificing bottom end or mid-range performance with Comp Cams cam phaser limiter kits.
( 6 )
$82.95
—
$87.95
COMP Cams Cam Phaser Lockout Kits
COMP Cams phaser lockout kits allow engine builders and enthusiasts to eliminate variable valve timing in specific applications, making the installation of larger camshafts possible for bigger power gains. Phaser lockouts will help gain more piston-to-valve clearance and simplify ECU tuning.
( 1 )
$92.95
COMP Cams Cam Buttons
Because all roller cam lobes are ground flat instead of tapered, like hydraulic or solid cams, COMP Cams provides a means of holding the cam back to the rear of the engine. Their cam buttons ride between the front of the timing gear and the back of the front cover and can be shimmed for proper endplay of the cam. COMP Cams makes solid nylon buttons and roller bearing thrust buttons for the ultimate in performance.
( 112 )
$79.95
COMP Cams Chevrolet Camshaft Installation Handles
These COMP Cams Chevrolet camshaft installation handles will make installing your new camshaft simple. They have a bolt-on handle that provides good leverage as well as a non-slip grip. These handles have an opening in the end for convenient storage of installation hardware.
Not Yet Reviewed
$83.95
COMP Cams Universal Camshaft Installation Handles
These COMP Cams universal camshaft installation handles will make installing your new camshaft simple. They include a comfort cushion grip and five interchangeable adapters that fit most domestic engines. These handles provide excellent leverage and support for camshaft installation or removal.
Not Yet Reviewed
$96.95
COMP Cams Camshaft Bearing Tool Replacement Parts
COMP Cams offers a wide range of camshaft bearing tool replacement parts—including sleeves, bearing collets, driver bars and extensions, expander components, washers, cones, and more. There's no need to buy a completely new tool when all you need is a small replacement item. Maintain your tools for optimum performance and longevity with an assist from COMP Cams!
Not Yet Reviewed
$53.95
—
$85.95
COMP Cams Fuel Pump Pushrods
Prevent cam damage from fuel pump lobe wear. COMP Cams has a reputation for being a problem solver. When a high-pressure fuel pump is run with a steel roller cam core, the stock fuel pump pushrod is not compatible with the steel core. You can damage an expensive roller cam as a result of wear at the fuel pump lobe. COMP Cams offers several fuel pump pushrods in response to this problem.
( 87 )
$52.95
COMP Cams Steel Valve Spring Retainers
New valve springs with larger diameters require new retainers to handle the higher pressures developed by the springs. COMP Cams valve spring retainers are the solution. Precision-machined, these retainers are specifically designed for positive location when combined with COMP Cams' valve springs. They're available for single, double and triple-spring applications.
( 167 )
$52.95
—
$88.95
COMP Cams Magnum Double Row Timing Sets
Building a performance street machine? COMP Cams Magnum double row timing sets are built for mild performance on the street. They have heat-treated, pre-stretched, large-pin, double-row chains for extra strength and reliability. They also have an induction hardened cast iron camshaft gear and billet steel crank sprocket with three keyways, which allow you to set cam timing at 4 degrees advanced, 4 degrees retarded, or normal. In addition, all COMP Cams Magnum double row timing sets are dynamically balanced for smoother operation.
( 113 )
$83.95
COMP Cams Pushrod Guideplates
COMP Cams pushrod guideplates are necessary in high-rpm motors. They keep your pushrods in line with your lifter cups and rocker arms—and prevent deflecting or walking sideways. The guideplates are hardened to prevent premature wear. They're available in sizes and styles for fitment on a variety of engine applications.
( 183 )
$57.95
—
$81.95
COMP Cams Valve Lash Caps
In today's higher rpm engines, the tip of the valve stem is subjected to a tremendous pounding. The best solution to this problem is COMP Cams' lash caps. These hardened lash caps are precision-machined and ground perfectly flat, to maintain accurate valvetrain adjustment.
( 32 )
$50.95
—
$80.95
COMP Cams Super Valve Locks
COMP Cams Super valve locks are wider-angled 10 degree locks. They distribute the ever-increasing valve spring loads over the retainer better than typical 7 degree locks by reducing the chance of "pull-through" failure. They are precision-machined for accuracy and are available for many popular valve sizes with or without a lash cap recess. Super valve locks will fit any COMP Cams 10 degree retainer and are recommended for all race applications due to their superior strength.
( 130 )
$54.95
—
$61.95
COMP Cams Crankshaft Sockets
COMP Cams crankshaft sockets are the perfect addition to your engine-building toolbox. They accept 1/2 in. drive ratchets for versatility and easy engine rotation. They're precision-machined for an accurate fit over the crank snout, and their knurled retaining nut threads-on to sandwich a degree wheel in place. The nut can be loosened, while on the crank snout, so that the wheel can be turned independently of the engine when finding top dead center.
( 198 )
$59.95
—
$70.95
COMP Cams Magnum Double Roller Timing Sets
Building a really high performance street vehicle? COMP Cams Magnum double roller timing sets are built for maximum performance on the street. They have heat-treated, pre-stretched, large-pin, double-row chains for extra strength and reliability. They also have an induction hardened cast iron camshaft gear and billet steel crank sprocket with three keyways, which allow you to set cam timing at 4 degrees advanced, 4 degrees retarded, or normal. In addition, all COMP Cams Magnum double roller timing sets are dynamically balanced for smoother operation.
( 238 )
$78.95
—
$97.95
COMP Cams Rocker Arm Adjusting Nuts
COMP Cams rocker arm adjusting nuts are designed for the ultimate in strength and locking force. They are precision-ground for minimum runout and are tapered for extra strength in the locking area. The special alloys in the polylocks ensure a quality and strength not found in any other competitive products.
( 145 )
$54.95
—
$87.95
COMP Cams Valve Spring Locators
As with all other areas in the valvetrain, the area where the spring sits also takes a beating. The old standard shims and/or seats simply will not hold up to the extreme pressures and high rpm found in today's performance engines. COMP Cams valve spring locators solve this problem and eliminate failures.
( 76 )
$65.95
—
$83.95
COMP Cams Valve Springs
Valve springs are one of the most critical and overlooked components in your engine. They must be matched to your cam in order for the engine to reach its full potential. It does absolutely no good to install a cam that will perform up to 8,000 rpm if you do not have the correct springs. Use the only valve springs that will give the recommended spring pressure with the valve both on the seat and at maximum lift. COMP Cams valve springs are offered in single and dual styles to meet your cam requirements.
( 253 )
$50.95
—
$97.95
COMP Cams High Energy Pushrods
COMP Cams High Energy pushrods are your best choice when building an engine for your street rod, RV, or everyday driver. COMP Cams High Energy pushrods are manufactured to meet or exceed all original equipment specifications for pushrods. They will mate perfectly with High Energy or Magnum rockers.
( 244 )
$51.95
—
$82.95
COMP Cams Timing Gear Drive Sets
COMP Cams gear drive sets are precision-constructed from aluminum, steel, or fiber materials. They're quality-tested for strict tolerances and timing accuracy.
( 15 )
$70.95
—
$74.95
COMP Cams Engine Finishing Kits
These COMP Cams engine finishing kits contain the often-forgotten components missing during final engine assembly. They include parts like Woodruff keys, cylinder head alignment dowels, cam bolts, timing cover dowels, and oil pump dowels. Available for small and big block Chevrolet and small block Ford engines, the COMP Cams engine finishing kits make engine assembly easy.
( 66 )
$54.95
COMP Cams Bronze Distributor Gears
Don't ruin your new steel roller cam by running the wrong distributor gear. Install one of these quality bronze distributor gears from COMP Cams. A stock cast iron gear is not compatible with a steel camshaft and can cause serious damage. These bronze gears are machined from AMPCO-45 extruded aluminum bronze with 5 percent nickel. They feature a high-strength tooth design that resists wear, even when used with high-pressure oil pumps.
( 39 )
$74.95
—
$96.95
COMP Cams Magnetic Deck Checkers
COMP Cams machined aluminum deck checkers incorporate magnets to hold itself firmly to the block for simple and accurate measurements. Mount a dial indicator (not included) in the center for deck height, or mount one indicator in each end to check piston rock.To calculate true compression ratio it's necessary to measure the distance between the deck surface of the block and the piston deck. Choose COMP Cams magnetic deck checkers to do the job.
( 1 )
$97.95
COMP Cams LS Cam Gear and Lock Plate Kits
Comp Cams camshaft gear and lock plate kits will help you upgrade with their 58x LS cam gear, lock plate, and three premium-grade bolts. Chevrolet LS engines are a popular way to power anything with wheels. So if you're planning to add more power to yours (nitrous, a turbocharger, or even a supercharger), you might want to upgrade your 1-bolt camshaft to a 3-bolt design so it can handle the increased power. Take your Chevrolet LS engine to the next level with the Comp Cams camshaft gear and lock plate kit designed to fit your application!
Not Yet Reviewed
$60.95
COMP Cams Magnum Rocker Arm Studs
Replace your stock rocker arm studs with these COMP Cams rocker arm studs. The Magnum series studs work well in applications with moderate lifts and spring pressures. These studs have thin jam nuts for rocker clearance, rolled threads for maximum contact, and ground-flat tops to achieve and maintain accurate valve adjustments. The jam nuts are large in diameter to spread the load over larger areas. COMP Cams studs have generous radii and feature a black oxide finish.
( 24 )
$81.95
