Availability
COMP Cams Super valve locks are wider-angled 10 degree locks. They distribute the ever-increasing valve spring loads over the retainer better than typical 7 degree locks by reducing the chance of "pull-through" failure. They are precision-machined for accuracy and are available for many popular valve sizes with or without a lash cap recess. Super valve locks will fit any COMP Cams 10 degree retainer and are recommended for all race applications due to their superior strength.
( 128 )
$22.95
—
$43.95
As with all other parts in the valvetrain, the area where the spring sits takes a beating. The old standard shims simply will not hold up to the extreme pressures and high rpm found in today's performance engines. COMP Cams offers this set of valve spring shims to solve this problem and eliminate failures.
( 104 )
$44.95
COMP Cams High Energy pushrods are your best choice when building an engine for your street rod, RV, or everyday driver. COMP Cams High Energy pushrods are manufactured to meet or exceed all original equipment specifications for pushrods. They will mate perfectly with High Energy or Magnum rockers.
( 242 )
$32.95
—
$48.95
These COMP Cams engine finishing kits contain the often-forgotten components missing during final engine assembly. They include parts like Woodruff keys, cylinder head alignment dowels, cam bolts, timing cover dowels, and oil pump dowels. Available for small and big block Chevrolet and small block Ford engines, the COMP Cams engine finishing kits make engine assembly easy.
( 66 )
$22.95
—
$38.95
COMP Cams pushrod guideplates are necessary in high-rpm motors. They keep your pushrods in line with your lifter cups and rocker arms—and prevent deflecting or walking sideways. The guideplates are hardened to prevent premature wear. They're available in sizes and styles for fitment on a variety of engine applications.
( 181 )
$26.95
—
$35.95
COMP Cams race locks are designed for stock or performance engines using 7 degree valve locks. They are manufactured from machined steel and offer excellent valve spring location, so it is not necessary to change to a 10 degree retainer. Whether you're rebuilding a stock engine or changing to valve springs that have more seat pressure, COMP Cams Race valve locks will provide the reliability that you've been looking for.
( 29 )
$30.95
—
$49.95
Because all roller cam lobes are ground flat instead of tapered, like hydraulic or solid cams, COMP Cams provides a means of holding the cam back to the rear of the engine. Their cam buttons ride between the front of the timing gear and the back of the front cover and can be shimmed for proper endplay of the cam. COMP Cams makes solid nylon buttons and roller bearing thrust buttons for the ultimate in performance.
( 109 )
$20.95
—
$45.95
COMP Cams Street valve locks are stock replacement for stock engine rebuilds. They're stamped and hardened for superior wear resistance. Use these steel valve locks for street applications with standard valve spring loads. They're available in a variety of sizes, styles, and quantities.
( 43 )
$23.95
—
$45.95
These COMP Cams shaft-type rocker arm adjusting screws are precision-machined from premium billet steel material and selectively heat-treated to provide maximum strength. They're extremely lightweight and are drilled for oiling, depending on your application. Whether you're rebuilding your engine or keeping up scheduled maintenance, COMP Cams shaft-type rocker arm adjusting screws will keep your valvetrain operating smoothly.
( 5 )
$22.95
Using COMP Cams offset bushings is the simplest way to change the degree of a camshaft in relation to the crankshaft. These bushings offer accurate positioning of the cam because of their precise manufacturing.
( 14 )
$20.95
—
$39.95
Designed specifically for high performance street and race engines, COMP Cams Ultra Gold ARC Series aluminum rocker arms are precision CNC-machined to strict tolerances. They incorporate modern technology and design features to create the most advanced aluminum rocker arms available. Proven to withstand extremely aggressive spring pressure, the COMP Cams Ultra Gold ARC Series aluminum rocker arms use their CNC-machined aluminum design for high quality and the ultimate in ratio accuracy.
( 114 )
$41.95
—
$46.95
Valve springs are one of the most critical and overlooked components in your engine. They must be matched to your cam in order for the engine to reach its full potential. It does absolutely no good to install a cam that will perform up to 8,000 rpm if you do not have the correct springs. Use the only valve springs that will give the recommended spring pressure with the valve both on the seat and at maximum lift. COMP Cams valve springs are offered in single and dual styles to meet your cam requirements.
( 241 )
$20.95
—
$49.95
Keep your valvetrain running smooth. COMP Cams High Energy hydraulic roller lifters are for use with the newly designed hydraulic roller cam series, or as performance replacements for stock hydraulic roller lifters. You must be certain that the lifters are correct for the type of block used.
( 73 )
$35.95
—
$38.95
Utilizing years of valvetrain design experience, the latest FEA stress analysis technology, and an exhaustive testing regiment (dyno and Spintron), COMP Cams engineering team left no detail to chance. Everything from casting techniques to valve spring clearance was scrutinized to ensure that Ultra Pro Magnum rocker arms not only lived up to the lofty standards of their predecessor, but also took stud mount rocker performance, stability, and value to a whole new level. The most noticeable advancement centers around their nearly unbreakable investment cast 8650 chromoly body. The arched, web-like design delivers a nearly 29 percent increase in strength and rigidity, while reducing the moment of inertia and optimizing the dynamic balance. The resulting rockers maximize lift and valvetrain control at high rpm. The increased retainer and valve spring clearances of the new design enable the use of large-diameter valve springs, retainers, and locks, without clearance or fitment issues. The new black oxide exterior finish offers a distinctive appearance, along with long-term corrosion resistance. The COMP Cams Ultra Pro Magnum rocker arms feature an oversized trunnion and precision-sorted needle bearings designed for use with high-load valve springs. These unique rockers also feature hardened roller tips for reduced friction and elimination of the valve stem "side loading" that causes premature valve guide wear.
( 203 )
$45.95
—
$46.95
As cam profiles get more aggressive and valve spring pressures increase, it is even more critical to select the right pushrod for your application. COMP Cams Hi-Tech pushrods are designed using high-quality premium steel alloy for a lifetime of strength and durability. Hi-Tech pushrods from COMP Cams' advanced technology keep you competitive in a high-tech world.
( 325 )
$20.95
—
$31.95
These COMP Cams Hi-Tech 210 degree pushrods were specifically designed for high-lift applications where pushrod and seat interference are problems at maximum lift. They're heat-treated to a minimum hardness of 60 on the Rockwell C scale, for the ultimate in strength. COMP Cams even gives them a black oxide finish and imprints the length and part number on them. In addition, they feature a 210 degree radius, rather than the standard 180 degree radius, so they'll work great with rocker arms that feature cup-type adjusters and applications requiring more load-bearing surface from the pushrod. If you are building a high-horsepower, high-rpm, high-lift camshaft engine, then you need to use these COMP Cams Hi-Tech 210 degree pushrods for maximum reliability.
( 7 )
$20.95
—
$35.95
Stress placed on cams and timing sets in today's racing engines produces a weak area at the front of the block. COMP Cams solved the problem with their moly-coated wear plates and thrust bearings. They are a must for all Chevy big block engines. The thrust bearings are a one-piece encapsulated design for the Chevys and a 3-piece design for Fords.
( 19 )
$20.95
—
$23.95
One way to increase power is to increase lift. That's what makes COMP Cams Magnum roller tip rocker arms so popular. They're one of the highest lift rockers you can get outside of racing. And, along with the lift, you also get a ball pivot roller tip to prevent valve stem and guide wear.
( 291 )
$20.95
—
$31.95
COMP Cams dual taper pushrods feature a unique dual taper for high strength and lightweight construction. They are manufactured from special steel alloy and utilize a 210-degree tip for an increased load-bearing surface. COMP Cams dual taper pushrods feature a .165 in. wall thickness to withstand today's high-pressure valve springs.
( 3 )
$20.95
—
$35.95
Finally, you can get high performance without a high price with COMP Cams High Energy diecast aluminum rocker arms. COMP Cams is a leader in valvetrain technology and has developed these High Energy rockers to provide a superior strength to weight ratio to withstand the hardships of your street performance and mild race engines, while adding valve lift. These diecast aluminum, larger-than-stock rocker bodies are designed to be stiffer and more durable. They feature needle-bearing fulcrums and roller tips to reduce friction and lower oil temperatures for even more horsepower potential. Maybe you're on a budget, or maybe you just appreciate getting the most for your coin; make an affordable choice without sacrificing performance--get COMP Cams High Energy diecast aluminum rocker arms.
( 222 )
$24.95
—
$26.95
COMP Cams offers these pivots balls as direct replacements for those used in their Magnum rockers.
( 10 )
$27.95
—
$32.95
COMP Cams straight tube pushrods feature an extra-thick .125 in. wall and an ultra-rigid large 7/16 in. diameter design that prevents the damaging valvetrain vibrations that occur when smaller diameter pushrods snap back into position. These straight tube pushrods are offered in a variety of lengths and are precision-made with high-strength materials for consistency and accurate geometry. Selecting the correct pushrods is critical for proper valvetrain operation. You can count on COMP Cams for the quality components you need to keep your engine running right!
( 4 )
$20.95
—
$24.95
COMP Cams have put together their engine plug kits because they understand it's easy to forget the little things. Ordering this one part number will supply you with all the plugs needed to seal the water and oil chambers in your LS engine. The plugs are made from brass and galvanized steel to resist corrosion, and will last for years without rusting or becoming stuck in your engine block. When building an LS engine, your primary focus is the major components—camshafts, cylinder heads, and like power makers. You don't want to overlooked the smaller, but also important, parts to complete your build. COMP Cams hasn't; pick up one of these engine plug kits and be ready to finish what you've started.
( 2 )
$49.95
Designed for extreme racing applications, COMP Cams replacement Hi-Tech roller race timing chains are double-row chains for extra strength and reliability. They serve as replacement chains for the old, worn-out chains in your Hi-Tech roller race timing sets, which are dynamically balanced for smoother, more accurate operation, with less fluctuation.
( 5 )
$31.95
—
$44.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
