Availability
COMP Cams Engine Break-In Oil Additive provides the good stuff, delivering a specially engineered blend of extreme pressure break-in ingredients that have been removed from current off-the-shelf motor oils. Delivering added protection during the break-in process (and beyond) for all the moving parts in your new or rebuilt engine, it's compatible with any petroleum, synthetic, or blended motor oil. Don't ruin your engine before you have fun with it, order COMP Cams Engine Break-In Oil Additive. Product features: * Improve surface mating of rotating assembly, rod journals, piston rings, valve guides, cam and lifters, etc. * Protect all internal engine components, including both flat tappet and roller valve trains * Proprietary additive package includes optimum amounts of ZDDP (Zinc and Phosphorus), Molybdenum, and detergents * Requires no additives or supplements for maximum protection * Compatible with gasoline, methanol, and high octane race fuels
( 260 )
$20.95
Initial startup is the most critical time in the life of any camshaft. COMP Cams Pro Cam lube can break in your camshafts properly. This lube must be spread generously on all lobes of the cam, the bottom of the lifters, and the distributor gear when installing a cam. This is the instant protection that you need to guard against any premature wear.
( 94 )
$16.95
—
$22.95
Because all roller cam lobes are ground flat instead of tapered, like hydraulic or solid cams, COMP Cams provides a means of holding the cam back to the rear of the engine. Their cam buttons ride between the front of the timing gear and the back of the front cover and can be shimmed for proper endplay of the cam. COMP Cams makes solid nylon buttons and roller bearing thrust buttons for the ultimate in performance.
( 109 )
$15.95
—
$22.95
COMP Cams cam lock plates will keep your cam installed in the right position. Most locking plates come with Grade 8 bolts and have a black oxide finish.
( 64 )
$10.95
—
$19.95
Simplify your valvetrain maintenance with COMP Cams valvetrain checking springs. They feature a low-tension design that allows them to be installed by hand for measuring piston-to-valve clearance, rocker arm ratio, and degreeing in a camshaft. They're available as singles or pairs.
( 67 )
$15.95
These pushrod length checking tools from COMP Cams make it easy and economical to lay out and determine the proper pushrod length for a high performance engine. This is necessary for correct valvetrain geometry, so you can obtain the desired results from the cam and ensure that damage is not done to the rest of the valvetrain.
( 93 )
$22.95
COMP Cams rocker arm adjusting nuts are designed for the ultimate in strength and locking force. They are precision-ground for minimum runout and are tapered for extra strength in the locking area. The special alloys in the polylocks ensure a quality and strength not found in any other competitive products.
( 142 )
$10.95
—
$17.95
COMP Cams offers a complete line of valve seals, from the stock GM O-rings to the positive-stop PTFE seals. They are a must to keep unwanted oil from entering the combustion chamber through the clearance in the valve guides. The O-ring seals use the standard retainer and oil splash shield. The umbrella seals are normally used when a larger-than-stock diameter spring is used. In the case of a double spring, the positive stop PTFE seals are used. For triple-spring applications, use the smaller-diameter Viton® seals.
( 190 )
$12.95
—
$23.95
These COMP Cams tools are designed to stop the piston in order to find top dead center. They mount on to the top of the engine block and thread into the existing head bolt holes.
( 25 )
$22.95
COMP Cams engine assembly lube is used by professional engine builders throughout the country for its superior lubricating properties and its ability to adhere to engine parts until the engine is started. This lubricant is also ideal for the ball socket area of rocker arms. COMP Cams engine assembly lube has a white lithium base and is easily removed with soap and water.
( 51 )
$17.95
We have added more cool designs to our line of COMP Cams T-shirts. These 100 percent cotton tees are available in a wide variety of sizes for everyone.
( 49 )
$15.00
These COMP Cams shaft-type rocker arm adjusting screws are precision-machined from premium billet steel material and selectively heat-treated to provide maximum strength. They're extremely lightweight and are drilled for oiling, depending on your application. Whether you're rebuilding your engine or keeping up scheduled maintenance, COMP Cams shaft-type rocker arm adjusting screws will keep your valvetrain operating smoothly.
( 5 )
$22.95
COMP Cams Street valve locks are stock replacement for stock engine rebuilds. They're stamped and hardened for superior wear resistance. Use these steel valve locks for street applications with standard valve spring loads. They're available in a variety of sizes, styles, and quantities.
( 42 )
$17.95
—
$26.95
As cam profiles get more aggressive and valve spring pressures increase, it is even more critical to select the right pushrod for your application. COMP Cams Hi-Tech pushrods are designed using high-quality premium steel alloy for a lifetime of strength and durability. Hi-Tech pushrods from COMP Cams' advanced technology keep you competitive in a high-tech world.
( 325 )
$17.95
—
$28.95
COMP Cams Magnum pushrods are the perfect complement to your Hot Street, bracket, oval track, or any other high performance engine. One-piece Magnum pushrods are made of C1020 high-carbon, .080 in. wall chromoly steel and are heat-treated for use with guideplates. They're an affordable way to combat higher spring pressures and the other stresses associated with high performance engines.
( 453 )
$15.95
—
$22.95
As with all other parts in the valvetrain, the area where the spring sits takes a beating. The old standard shims simply will not hold up to the extreme pressures and high rpm found in today's performance engines. COMP Cams offers this set of valve spring shims to solve this problem and eliminate failures.
( 104 )
$19.95
These COMP Cams piston stop tools are designed to stop the piston in order to find top dead center. They thread into the spark plug hole for accurate use.
( 60 )
$15.95
These High Energy hydraulic lifters from COMP Cams feature a patented, constant orifice-metering valve that precisely meters oil to the rocker arms. Continuous contact between the metering valve and the precisely coined bottom surface of the pushrod seat is maintained throughout the engine's rpm range, eliminating excessive oiling at high speeds. The pushrod seat is made of a special powdered metal iron alloy, heat-treated for strength and wear resistance. The longer piston is produced with through-hardened steel that provides more bearing surface and increased lifter longevity. These lifters have a lightweight check valve disk that allows for quicker response, resulting in increased engine speed before valve float.
( 153 )
$14.95
—
$25.95
COMP Cams EST 1976 hats are a great way to get shade from the sun and look terrific, whether you're in the garage, at the track, or on the town. The hats utilize a one-size-fits-all adjustable back strap so that everyone can enjoy sporting the COMP Cams colors.
( 30 )
$20.95
COMP Cams straight tube pushrods feature an extra-thick .125 in. wall and an ultra-rigid large 7/16 in. diameter design that prevents the damaging valvetrain vibrations that occur when smaller diameter pushrods snap back into position. These straight tube pushrods are offered in a variety of lengths and are precision-made with high-strength materials for consistency and accurate geometry. Selecting the correct pushrods is critical for proper valvetrain operation. You can count on COMP Cams for the quality components you need to keep your engine running right!
( 4 )
$17.95
—
$24.95
Using COMP Cams offset bushings is the simplest way to change the degree of a camshaft in relation to the crankshaft. These bushings offer accurate positioning of the cam because of their precise manufacturing.
( 14 )
$17.95
—
$20.95
COMP Cams dual taper pushrods feature a unique dual taper for high strength and lightweight construction. They are manufactured from special steel alloy and utilize a 210-degree tip for an increased load-bearing surface. COMP Cams dual taper pushrods feature a .165 in. wall thickness to withstand today's high-pressure valve springs.
( 3 )
$20.95
—
$26.95
COMP Cams Performance Series solid lifters are specifically designed for high-end street and race applications. They feature a precision-ground crown radius and surface finish to promote performance camshaft compatibility and high-rpm durability. The lightweight design and premium one-piece pushrod seat provide an extended rpm range, and their accurately located oil band yields a consistent, properly metered oil flow.
( 23 )
$16.95
—
$26.95
The new COMP Cams Pin-Up T-shirts are a perfect and creative way to show off your favorite valvetrain company. These all-black shirts include a retro COMP Cams logo in white with red trim on the front, with the words "Legendary Performance" appearing just above and below the vintage insignia. The back features the same logo and is flanked by an illustration of a blonde pin-up model posed on a camshaft. These shirts are made from Gildan Ultra cotton, meaning they will never shrink, and the all-black design won't show dirt or grease. These COMP Cams Pin-Up T-shirts are available in sizes Small to 3XL, so there is an option for everyone.
( 5 )
$20.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
