Availability
Because all roller cam lobes are ground flat instead of tapered, like hydraulic or solid cams, COMP Cams provides a means of holding the cam back to the rear of the engine. Their cam buttons ride between the front of the timing gear and the back of the front cover and can be shimmed for proper endplay of the cam. COMP Cams makes solid nylon buttons and roller bearing thrust buttons for the ultimate in performance.
( 109 )
$15.95
COMP Cams cam lock plates will keep your cam installed in the right position. Most locking plates come with Grade 8 bolts and have a black oxide finish.
( 64 )
$10.95
—
$19.95
Simplify your valvetrain maintenance with COMP Cams valvetrain checking springs. They feature a low-tension design that allows them to be installed by hand for measuring piston-to-valve clearance, rocker arm ratio, and degreeing in a camshaft. They're available as singles or pairs.
( 67 )
$15.95
Initial startup is the most critical time in the life of any camshaft. COMP Cams Pro Cam lube can break in your camshafts properly. This lube must be spread generously on all lobes of the cam, the bottom of the lifters, and the distributor gear when installing a cam. This is the instant protection that you need to guard against any premature wear.
( 84 )
$16.95
We have added more cool designs to our line of COMP Cams T-shirts. These 100 percent cotton tees are available in a wide variety of sizes for everyone.
( 51 )
$15.00
COMP Cams rocker arm adjusting nuts are designed for the ultimate in strength and locking force. They are precision-ground for minimum runout and are tapered for extra strength in the locking area. The special alloys in the polylocks ensure a quality and strength not found in any other competitive products.
( 145 )
$10.95
—
$17.95
COMP Cams engine assembly lube is used by professional engine builders throughout the country for its superior lubricating properties and its ability to adhere to engine parts until the engine is started. This lubricant is also ideal for the ball socket area of rocker arms. COMP Cams engine assembly lube has a white lithium base and is easily removed with soap and water.
( 51 )
$17.95
As with all other parts in the valvetrain, the area where the spring sits takes a beating. The old standard shims simply will not hold up to the extreme pressures and high rpm found in today's performance engines. COMP Cams offers this set of valve spring shims to solve this problem and eliminate failures.
( 105 )
$19.95
These COMP Cams piston stop tools are designed to stop the piston in order to find top dead center. They thread into the spark plug hole for accurate use.
( 60 )
$15.95
As cam profiles get more aggressive and valve spring pressures increase, it is even more critical to select the right pushrod for your application. COMP Cams Hi-Tech pushrods are designed using high-quality premium steel alloy for a lifetime of strength and durability. Hi-Tech pushrods from COMP Cams' advanced technology keep you competitive in a high-tech world.
( 325 )
$17.95
—
$19.95
COMP Cams offers a complete line of valve seals, from the stock GM O-rings to the positive-stop PTFE seals. They are a must to keep unwanted oil from entering the combustion chamber through the clearance in the valve guides. The O-ring seals use the standard retainer and oil splash shield. The umbrella seals are normally used when a larger-than-stock diameter spring is used. In the case of a double spring, the positive stop PTFE seals are used. For triple-spring applications, use the smaller-diameter Viton® seals.
( 192 )
$12.95
—
$19.95
COMP Cams Magnum pushrods are the perfect complement to your Hot Street, bracket, oval track, or any other high performance engine. One-piece Magnum pushrods are made of C1020 high-carbon, .080 in. wall chromoly steel and are heat-treated for use with guideplates. They're an affordable way to combat higher spring pressures and the other stresses associated with high performance engines.
( 457 )
$15.95
—
$19.95
COMP Cams logo hats are a great way to get shade from the sun and look terrific, whether you're in the garage, at the track, or on the town. The hats utilize a one-size-fits-all adjustable back strap so that everyone can enjoy sporting the COMP Cams brand in style.
( 14 )
$18.95
The new COMP Cams Pin-Up T-shirts are a perfect and creative way to show off your favorite valvetrain company. These all-black shirts include a retro COMP Cams logo in white with red trim on the front, with the words "Legendary Performance" appearing just above and below the vintage insignia. The back features the same logo and is flanked by an illustration of a blonde pin-up model posed on a camshaft. These shirts are made from Gildan Ultra cotton, meaning they will never shrink, and the all-black design won't show dirt or grease. These COMP Cams Pin-Up T-shirts are available in sizes Small to 3XL, so there is an option for everyone.
( 5 )
$20.00
High Energy rocker arms from COMP Cams are excellent replacements for stock engine rebuilds with a stock or High Energy camshaft. They eliminate the noise and slop associated with worn or high-mileage stock rockers and match or exceed factory specifications.
( 28 )
$15.95
—
$16.95
These High Energy hydraulic lifters from COMP Cams feature a patented, constant orifice-metering valve that precisely meters oil to the rocker arms. Continuous contact between the metering valve and the precisely coined bottom surface of the pushrod seat is maintained throughout the engine's rpm range, eliminating excessive oiling at high speeds. The pushrod seat is made of a special powdered metal iron alloy, heat-treated for strength and wear resistance. The longer piston is produced with through-hardened steel that provides more bearing surface and increased lifter longevity. These lifters have a lightweight check valve disk that allows for quicker response, resulting in increased engine speed before valve float.
( 156 )
$14.95
—
$18.95
COMP Cams roller lifter link bars are designed to replace your worn or damaged link bars, when fitted to COMP Cams roller lifters. They are precision-crafted from stainless steel and wear-coated for a long life in all applications.
( 1 )
$14.95
These COMP Cams engine finishing kits contain the often-forgotten components missing during final engine assembly. They include parts like Woodruff keys, cylinder head alignment dowels, cam bolts, timing cover dowels, and oil pump dowels. Available for small and big block Chevrolet and small block Ford engines, the COMP Cams engine finishing kits make engine assembly easy.
( 66 )
$18.95
—
$19.95
For the enthusiast who chooses a solid lifter cam, COMP Cams offers the highest quality solid lifters available today. These lifters are manufactured using the tightest tolerances in the industry, ensuring optimum performance. The crown of the lifters is ground to a precise radius for proper break-in and to guarantee long life. The oil-metering band is milled to the correct depth to prevent too much oil from being delivered to the top of the motor, and to prevent horsepower loss. Order the size and quantity needed for your engine application.
( 28 )
$16.95
—
$18.95
Stress placed on cams and timing sets in today's racing engines produces a weak area at the front of the block. COMP Cams solved the problem with their moly-coated wear plates and thrust bearings. They are a must for all Chevy big block engines. The thrust bearings are a one-piece encapsulated design for the Chevys and a 3-piece design for Fords.
( 19 )
$19.95
COMP Cams pushrod guideplates are necessary in high-rpm motors. They keep your pushrods in line with your lifter cups and rocker arms—and prevent deflecting or walking sideways. The guideplates are hardened to prevent premature wear. They're available in sizes and styles for fitment on a variety of engine applications.
( 182 )
$13.95
—
$16.95
COMP Cams replacement cylinder head CC sealing plates will make sure that you're getting the right measurement each time. They are manufactured from clear Plexiglas and will fit most cylinder heads for an easy installation.
( 2 )
$16.95
COMP Cams Performance Series solid lifters are specifically designed for high-end street and race applications. They feature a precision-ground crown radius and surface finish to promote performance camshaft compatibility and high-rpm durability. The lightweight design and premium one-piece pushrod seat provide an extended rpm range, and their accurately located oil band yields a consistent, properly metered oil flow.
( 23 )
$16.95
Valve springs are one of the most critical and overlooked components in your engine. They must be matched to your cam in order for the engine to reach its full potential. It does absolutely no good to install a cam that will perform up to 8,000 rpm if you do not have the correct springs. Use the only valve springs that will give the recommended spring pressure with the valve both on the seat and at maximum lift. COMP Cams valve springs are offered in single and dual styles to meet your cam requirements.
( 241 )
$10.95
—
$18.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
