Availability
These lifters are for use with the newly designed Hydraulic Roller Cam Series from COMP Cams—or as replacements for stock hydraulic roller lifters. You must be certain that the lifter is correct for the type of block used, because some later model blocks require special lifter designs. Order the model tailored for your engine application.
( 18 )
$517.95
COMP Cams HRT Stage 1 camshafts use the newest and most advanced lobe designs in order to produce some of the highest average power and torque available. The "Low Shock Technology" features lobe profiles designed to maximize horsepower while improving stability at higher engine speeds. These profiles are also easier on the valve springs, enhancing durability and reducing load loss. COMP Cams HRT camshafts receive the Micro Surface Enhancement (MSE) finishing process as a standard feature, which increases strength and performance by reducing surface peak roughness and provides a 250 percent improvement in the effective load bearing area, allowing for much higher loads. All HRT Stage 1 camshafts do not require upgraded valve springs.
( 1 )
$605.95
COMP Cams Evolution Series hydraulic roller lifters with Hydraulic Cartridge Technology (HCT) are revolutionary patented tappets. A combination of a self-contained hydraulic cartridge within a thick-wall lifter body and accompanying reduced oil volume that is less effected by oil aeration delivers the most consistent bleed rates between each lifter on the market. The smaller volume within the hydraulic cartridge creates one of the most responsive and quietest lifters on the market today. Startup noise is greatly reduced, and a precision-controlled bleed down rate ensures excellent performance at high RPM. The cartridge design also allows for an incredibly stiff lifter body, greatly reducing body distortion and further ensuring consistent hydraulic performance. The patented HCT tappets are a completely new design that was developed specifically by COMP Cams to meet the demanding performance and durability required for modern street and performance street engines. The HCT and proprietary manufacturing processes of these lifters ensure precision and longevity that exceed any lifter on the market. Other features include increased duration and lift to the camshaft and two oiling features. Another industry first is the fact that the hydraulic element of this patented lifter is serviceable, allowing anyone to rebuild lifters in his or her own garage. Order the Evolution lifters recommended for your year/make and engine application.
( 10 )
$646.95
—
$726.95
COMP Cams Endure-X roller lifters set the standard for solid roller lifter technology. The hydraulic roller lifters are designed with oiling and inboard link bars, they're engineered to withstand the demands of aggressive cam lobe designs and increased RPM ranges. The lifters feature a wear-resistant tool steel axle, precision sorted needle bearings, and most applications include EDM oil injection technology that guarantees the bearing assembly receives a constant flow of oil. Endure-X solid roller lifters are heat treated, machined to ultra-high tolerances, and fully rebuildable.
( 40 )
$660.95
—
$823.95
COMP Cams HRT Stage 2 camshafts use the newest and most advanced lobe designs in order to produce some of the highest average power and torque available. The "Low Shock Technology" features lobe profiles designed to maximize horsepower while improving stability at higher engine speeds. These profiles are also easier on the valve springs, enhancing durability and reducing load loss. These new HRT camshafts receive the Micro Surface Enhancement (MSE) finishing process as a standard feature, which increases strength and performance by reducing surface peak roughness and provides a 250 percent improvement in the effective load bearing area, allowing for much higher loads.
( 1 )
$579.95
—
$605.95
COMP Cams Xtreme Energy cam and lifter kits are built to take advantage of the latest cam technology and provide maximum performance. Whether your use is off-roading, towing, or street performance, there are Xtreme Energy options available for you. By using an aggressive lobe profile, they provide better throttle response and more top-end horsepower than equivalent kits from other manufacturers, while delivering increased engine vacuum. Order the model designed for your vehicle and engine application.
( 386 )
$544.95
—
$678.95
COMP Cams Xtreme Energy retrofit camshafts are built to take advantage of the latest cam technology—and provide maximum performance. Whether your use is off-roading, towing, or street performance, there is an Xtreme Energy cam available for you. By using an aggressive lobe profile, these hydraulic roller tappet cams provide better throttle response, engine vacuum, and top-end horsepower than equivalent cams from other manufacturers. Choose the model and options designed for your engine application.
( 58 )
$531.95
COMP Cams is bringing the muscle car sound back, and it's nastier than ever! Let's face it--few things serve to grab our attention at a car show or cruise night more than a car with a thumping, high performance idle. In an ongoing quest to provide you with the performance and sound you demand, COMP Cams engineering team proudly introduces the Thumpr Series cam and lifter kits. The lobe profile and grind characteristics of these Thumpr camshafts use a combination of an early exhaust valve opening, a long exhaust duration, and a generous amount of intake and exhaust overlap to maximize the rough-idling characteristics of the cams. This gives you a seriously aggressive exhaust note without negatively impacting the power output or streetability of the engine. Thumpr camshafts are available in different grind profiles; each one will produce a rough, racy exhaust note and impressive amounts of horsepower and torque within a different rpm range. Thumpr Series cam and lifter kits deliver a substantial power increase over an identical hydraulic flat tappet grind without sacrificing reliability or ease of maintenance.
( 212 )
$707.95
—
$743.95
COMP Cams Thumpr NSR Hemi Gen III/IV camshafts bring the wildly popular Thumpr sound to late model Hemi engines, while offering big power gains and no need to upgrade valve springs. The cams are made from billet steel cores for increased strength—and require no springs for a far easier installation. Great in naturally aspirated or supercharged applications, COMP Cams Thumpr NSR Hemi Gen III/IV camshafts provide excellent performance in mid- to upper-rpm ranges. Order the model designed for your vehicle and engine application.
Not Yet Reviewed
$605.95
COMP Cams Xtreme Energy camshafts employ the latest cam technology to provide maximum performance. Whether your use is off-roading, towing, or street performance, there's an Xtreme Energy cam available for you. By using an aggressive lobe profile, these cams provide better throttle response and more top-end horsepower than equivalent cams from other manufacturers—while delivering increased engine vacuum. Hundreds of models are available for fitment on vehicles from 1955 to the present. Select the cam designed for your application.
( 337 )
$531.95
Increase your street machine's gas mileage and powerband performance! COMP Cams High Energy cam and lifter kits are designed for street engines with an 8:1 to 9:1 compression ratio. They also work well with all stock components, including intakes, exhaust manifolds, and carburetors. These kits offer good increases in both gas mileage and power throughout the rpm range for most street applications.
( 180 )
$511.95
—
$559.95
COMP Cams Pro Magnum shaft mount roller rocker arms combine the strength of 8650 chromoly steel and the weight savings of aluminum rockers. COMP Cams took advantage of computer design to simulate the stresses that affect rockers under various operating loads. This allowed the engineers to lessen the rockers' mass at non-critical areas and strengthen the areas that take the most punishment. The results are rocker arms that are strong where they need to be and actually weigh 5 percent less at the valve than comparable aluminum rockers.
( 30 )
$838.95
COMP Cams is bringing back the musclecar sound—and it's nastier than ever! Few things grab our attention at a car show or cruise night more than a car with a thumping high performance idle. In an ongoing quest to provide you with the performance and sound you demand, COMP Cams' engineering team proudly introduces the Thumpr retrofit hydraulic roller camshafts. They are a series of camshafts designed for use in engines that were originally equipped with flat tappet camshafts. The lobe profile and grind characteristics use a combination of an early exhaust valve opening, a long exhaust duration, and a generous amount of intake and exhaust overlap to maximize the rough-idling characteristics of the cams. They give you a seriously aggressive exhaust note without negatively impacting the power output or streetability of the engine. Thumpr camshafts are available in three different grind profiles. Each one will produce a rough, racy exhaust note and impressive amounts of horsepower and torque within a different rpm range. COMP Cams Thumpr Series camshafts feature a cutting-edge hydraulic roller design that delivers a substantial power increase over identical hydraulic flat tappet grinds—without sacrificing reliability or ease of maintenance.
( 33 )
$531.95
COMP Cams Chrysler Hemi phaser camshafts utilize Variable Valve Timing (VVT) technology to maximize power and performance in stock and street/strip applications. The new Hemi engines from Chrysler are great power plants straight from the factory, with technology that allows the camshafts to move in real time. Instead of scrapping this advanced system, COMP Cams has embraced it with a new line of aftermarket Hemi-specific cams. The patent-pending Hemi phaser camshafts work with phaser limiters or locks to fully utilize Chrysler's Variable Valve Timing (VVT) technology, which allows them to pick up torque in the low end of the engine, while maintaining power up high. Made from a billet core, these hydraulic roller cams are engineered tough enough to handle 5.7L and 6.4L Hemi street/strip engines. Their unique, no-springs-required design maintains piston-to-valve clearance, while enabling high performance lobes utilizing VVT, making them perfect for late model Dodge Challengers, Dodge Chargers, Chrysler 300s, Jeeps, Dodge trucks, and Mopar crate engines with VVT. COMP Cams Chrysler Hemi phaser camshafts are available as both custom and three different off-the-shelf grinds, dependent upon engine type, for improved performance over OEM options. They will require the COMP Cams phaser limiter or lock kits to limit the degree of maximum cam phasing to 14 crank degrees (7 cam degrees) and they are available separately.
( 5 )
$605.95
COMP Cams Mutha Thumpr hydraulic roller camshafts are manufactured to the strictest tolerances, rigorously tested and are checked for quality. The Thumpr lobe profiles are designed to optimize the character and sound, while providing excellent stability and a very wide power range—specific profiles are developed uniquely for the intake and exhaust. Have you ever been to the races and heard how nasty the cams sound? The Thumpr series of cams give you everyday drivability but have that nasty race engine growl! COMP Cams competitive drive, superior engineering, and cutting-edge technology is what keeps them at the fore front from any other camshaft manufacturer. So ... pick the cam for your application, then add a set of hydraulic lifters—and you will be the talk of the town!
Not Yet Reviewed
$531.95
COMP Cams Magnum solid roller camshafts are designed for everyone from the serious street performance enthusiast—to the all-out competition drag racer. Whether you're driving a street rod or show car with power accessories … or a super gas, super competition car on alcohol, one of these cams will fit your engine's needs.
( 8 )
$531.95
COMP Cams drag race camshafts are offered in four styles: hydraulic flat tappet, hydraulic roller tappet, mechanical roller tappet, and mechanical flat tappet. These cams are ideal for the performance demands of the dragstrip, as well as street, strip, Circle Track, and other applications. Over a hundred models are available; choose the camshaft designed for your vehicle and engine family.
( 28 )
$531.95
COMP Cams Magnum solid lifter cam and lifter kits are specifically designed for the street enthusiast looking for more power and that Pro Street sound. Whether your choice would be the 270s with low-speed torque and noticeable idle, or the 306s for larger cubic inch engines with tremendous high-rpm power and radical idle, one of the Magnum series cam and lifter kits will fit your engine's needs.
( 30 )
$770.95
COMP Cams HRT Stage 3 camshafts use the newest and most advanced lobe designs in order to produce some of the highest average power and torque available. The "Low Shock Technology" features lobe profiles engineered to maximize horsepower while improving stability at higher engine speeds. These profiles are also easier on the valve springs, enhancing durability and reducing load loss. COMP Cams HRT Stage 3 cams receive the Micro Surface Enhancement (MSE) finishing process as a standard feature to increase strength and performance by reducing surface peak roughness. This also provides noticeable improvement in the effective load bearing area, thus allowing for much higher loads. Order the model recommended for your vehicle and engine application.
( 1 )
$605.95
COMP Cams computer-controlled camshafts are specifically designed for the serious street performance enthusiast. Whether it's for a street rod or a show car with power accessories, one of these cams will fit your engine's needs.
( 46 )
$531.95
Clearance
COMP Cams short travel hydraulic roller lifters have been engineered from a patent-pending design that specifically performs at higher engine speeds. They're designed to limit the lifter's internal piston as it is pumped up. By limiting that movement, the COMP Cams short travel hydraulic roller lifters cut down on the loss of power and limit valvetrain failure at higher rpm. The lifters are REM-finished and then black oxide coated for extreme durability, even for those high-revving engines. Choose the size, quantity, and other options tailored for your high performance application.
( 14 )
$813.95
Valve springs are one of the most critical and overlooked components in your engine. They must be matched to your cam in order for the engine to reach its full potential. It does absolutely no good to install a cam that will perform up to 8,000 rpm if you do not have the correct springs. Use the only valve springs that will give the recommended spring pressure with the valve both on the seat and at maximum lift. COMP Cams valve springs are offered in single and dual styles to meet your cam requirements.
( 272 )
$550.95
Simplify your valvetrain assembly! COMP Cams high performance valve spring kits have everything that you need for a complete valve spring assembly. Springs and retainers are included, along with complete instructions for a worry-free installation.
( 32 )
$801.95
Famous factory camshafts of the past are combined with the latest advanced camshaft technology to give you the sound and excitement of the musclecar era. COMP Cams Nostalgia Plus cam and lifter kits are specifically designed to capture the essence of the original '60s musclecar with additional power that you can feel in the seat of your pants. The new technology creates awesome response to give new life to any hot rod.
( 38 )
$701.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
