Availability
Building a really high performance street vehicle? COMP Cams Magnum double roller timing sets are built for maximum performance on the street. They have heat-treated, pre-stretched, large-pin, double-row chains for extra strength and reliability. They also have an induction hardened cast iron camshaft gear and billet steel crank sprocket with three keyways, which allow you to set cam timing at 4 degrees advanced, 4 degrees retarded, or normal. In addition, all COMP Cams Magnum double roller timing sets are dynamically balanced for smoother operation.
( 237 )
$83.95
—
$91.95
Don't ruin your new steel roller cam by running the wrong distributor gear. Install one of these quality bronze distributor gears from COMP Cams. A stock cast iron gear is not compatible with a steel camshaft and can cause serious damage. These bronze gears are machined from AMPCO-45 extruded aluminum bronze with 5 percent nickel. They feature a high-strength tooth design that resists wear, even when used with high-pressure oil pumps.
( 39 )
$85.95
—
$87.95
COMP Cams crankshaft sockets are the perfect addition to your engine-building toolbox. They accept 1/2 in. drive ratchets for versatility and easy engine rotation. They're precision-machined for an accurate fit over the crank snout, and their knurled retaining nut threads-on to sandwich a degree wheel in place. The nut can be loosened, while on the crank snout, so that the wheel can be turned independently of the engine when finding top dead center.
( 194 )
$75.95
Replace your stock rocker arm studs with these COMP Cams rocker arm studs. The Magnum series studs work well in applications with moderate lifts and spring pressures. These studs have thin jam nuts for rocker clearance, rolled threads for maximum contact, and ground-flat tops to achieve and maintain accurate valve adjustments. The jam nuts are large in diameter to spread the load over larger areas. COMP Cams studs have generous radii and feature a black oxide finish.
( 24 )
$102.95
These High Energy hydraulic lifters from COMP Cams feature a patented, constant orifice-metering valve that precisely meters oil to the rocker arms. Continuous contact between the metering valve and the precisely coined bottom surface of the pushrod seat is maintained throughout the engine's rpm range, eliminating excessive oiling at high speeds. The pushrod seat is made of a special powdered metal iron alloy, heat-treated for strength and wear resistance. The longer piston is produced with through-hardened steel that provides more bearing surface and increased lifter longevity. These lifters have a lightweight check valve disk that allows for quicker response, resulting in increased engine speed before valve float.
( 153 )
$99.95
COMP Cams Evolution Series hydraulic roller lifters with Hydraulic Cartridge Technology (HCT) are revolutionary patented tappets. A combination of a self-contained hydraulic cartridge within a thick-wall lifter body and accompanying reduced oil volume that is less effected by oil aeration delivers the most consistent bleed rates between each lifter on the market. The smaller volume within the hydraulic cartridge creates one of the most responsive and quietest lifters on the market today. Startup noise is greatly reduced, and a precision-controlled bleed down rate ensures excellent performance at high RPM. The cartridge design also allows for an incredibly stiff lifter body, greatly reducing body distortion and further ensuring consistent hydraulic performance. The patented HCT tappets are a completely new design that was developed specifically by COMP Cams to meet the demanding performance and durability required for modern street and performance street engines. The HCT and proprietary manufacturing processes of these lifters ensure precision and longevity that exceed any lifter on the market. Other features include increased duration and lift to the camshaft and two oiling features. Another industry first is the fact that the hydraulic element of this patented lifter is serviceable, allowing anyone to rebuild lifters in his or her own garage. Order the Evolution lifters recommended for your year/make and engine application.
( 10 )
$92.95
COMP Cams Xtreme Energy DLC hydraulic flat tappet lifters are quality yet inexpensive performance-proven lifters available in hydraulic and solid for multiple applications. These tappets feature a Diamond-Like Coating (DLC) face that forms an extremely hard, tough, and high-lubricity surface to reduce friction at the cam lobe/lifter interface, extending lifter and camshaft life significantly. The lifters maintain the excellent performance expected of a COMP product and are available for Chevrolet, Buick, Cadillac, Pontiac, Oldsmobile, Ford, Chrysler, and AMC applications requiring flat tappets. Additional details: * DLC: Diamond-Like Carbon * Wear-resistant * High lubricity * Cast-iron and steel camshaft compatible * Outstanding performance in Spintron durability testing simulation of an entire racing season * Excellent alternative to hard-to-find standard lifters
( 1 )
$112.95
COMP Cams rocker shaft retainers and bolts contain the hold-down retainers and bolts to secure both rocker arm shafts. They are manufactured to OEM Mopar specifications to ensure the highest quality. The retainers and bolts will fit all cylinder heads with cast-in rocker arm stands.
( 7 )
$81.95
COMP Cams Hi-Tech Roller Race timing sets are designed for extreme racing applications. They feature double-row chains with oversized rollers for extra strength and reliability, plus crank sprockets with three keyways. These three choices allow you to set cam timing at normal, 4 degrees advanced, or 4 degrees retarded. Hi-Tech Roller Race sets are dynamically balanced for smoother, more accurate operation, with less fluctuation.
( 45 )
$97.95
—
$100.95
These lifters are for use with the newly designed Hydraulic Roller Cam Series from COMP Cams—or as replacements for stock hydraulic roller lifters. You must be certain that the lifter is correct for the type of block used, because some later model blocks require special lifter designs. Order the model tailored for your engine application.
( 18 )
$54.95
These COMP Cams engine finishing kits contain the often-forgotten components missing during final engine assembly. They include parts like Woodruff keys, cylinder head alignment dowels, cam bolts, timing cover dowels, and oil pump dowels. Available for small and big block Chevrolet and small block Ford engines, the COMP Cams engine finishing kits make engine assembly easy.
( 66 )
$54.95
COMP Cams engine storage stands are available to fit different engine types. The stands are made of high-quality, fine-crafted steel with a red powdercoat finish, and includes secure and easy-to-attach adjustable mounting arms to ensure the engine remains upright in the cradle. For engine swaps, rebuilding, or storage, COMP Cams cradle stands are a must-have. Order the model recommended for your engine application.
Not Yet Reviewed
$99.95
For maximum performance and long life, we recommend COMP Cams rocker arm shafts. Made from hardened chrome or chromoly steel, they're heat-treated to obtain maximum strength and stiffness. A unique oil system lubricates all critical parts for long lasting service. These rocker arm shafts are designed to be used with various types of COMP Cams rocker arms, depending on your automotive needs.
( 1 )
$110.95
COMP Cams High Energy timing sets are a solid choice for many applications. They are designed to meet or exceed all OE specifications, which makes them a good selection for RVs, street rods, or daily drivers.
( 27 )
$52.95
—
$68.95
COMP Cams Endure-X roller lifters set the standard for solid roller lifter technology. The hydraulic roller lifters are designed with oiling and inboard link bars, they're engineered to withstand the demands of aggressive cam lobe designs and increased RPM ranges. The lifters feature a wear-resistant tool steel axle, precision sorted needle bearings, and most applications include EDM oil injection technology that guarantees the bearing assembly receives a constant flow of oil. Endure-X solid roller lifters are heat treated, machined to ultra-high tolerances, and fully rebuildable.
( 40 )
$62.95
—
$74.95
COMP Cams Pro Magnum shaft mount roller rocker arms combine the strength of 8650 chromoly steel and the weight savings of aluminum rockers. COMP Cams took advantage of computer design to simulate the stresses that affect rockers under various operating loads. This allowed the engineers to lessen the rockers' mass at non-critical areas and strengthen the areas that take the most punishment. The results are rocker arms that are strong where they need to be and actually weigh 5 percent less at the valve than comparable aluminum rockers.
( 30 )
$79.95
COMP Cams High Energy pushrods are your best choice when building an engine for your street rod, RV, or everyday driver. COMP Cams High Energy pushrods are manufactured to meet or exceed all original equipment specifications for pushrods. They will mate perfectly with High Energy or Magnum rockers.
( 240 )
$82.95
Utilizing years of valvetrain design experience, the latest FEA stress analysis technology, and an exhaustive testing regiment (dyno and Spintron), COMP Cams engineering team left no detail to chance. Everything from casting techniques to valve spring clearance was scrutinized to ensure that Ultra Pro Magnum rocker arms not only lived up to the lofty standards of their predecessor, but also took stud mount rocker performance, stability, and value to a whole new level. The most noticeable advancement centers around their nearly unbreakable investment cast 8650 chromoly body. The arched, web-like design delivers a nearly 29 percent increase in strength and rigidity, while reducing the moment of inertia and optimizing the dynamic balance. The resulting rockers maximize lift and valvetrain control at high rpm. The increased retainer and valve spring clearances of the new design enable the use of large-diameter valve springs, retainers, and locks, without clearance or fitment issues. The new black oxide exterior finish offers a distinctive appearance, along with long-term corrosion resistance. The COMP Cams Ultra Pro Magnum rocker arms feature an oversized trunnion and precision-sorted needle bearings designed for use with high-load valve springs. These unique rockers also feature hardened roller tips for reduced friction and elimination of the valve stem "side loading" that causes premature valve guide wear.
( 200 )
$76.95
Clearance
COMP Cams short travel hydraulic roller lifters have been engineered from a patent-pending design that specifically performs at higher engine speeds. They're designed to limit the lifter's internal piston as it is pumped up. By limiting that movement, the COMP Cams short travel hydraulic roller lifters cut down on the loss of power and limit valvetrain failure at higher rpm. The lifters are REM-finished and then black oxide coated for extreme durability, even for those high-revving engines. Choose the size, quantity, and other options tailored for your high performance application.
( 14 )
$77.95
Replace your old, worn out and over-stretched timing chains with COMP Cams replacement Magnum timing chains. These heavy-duty, heat-treated true double roller timing chains are designed for use with COMP Cams Magnum timing sets.
( 3 )
$51.95
For the enthusiast who chooses a solid lifter cam, COMP Cams offers the highest quality solid lifters available today. These lifters are manufactured using the tightest tolerances in the industry, ensuring optimum performance. The crown of the lifters is ground to a precise radius for proper break-in and to guarantee long life. The oil-metering band is milled to the correct depth to prevent too much oil from being delivered to the top of the motor, and to prevent horsepower loss. Order the size and quantity needed for your engine application.
( 27 )
$50.95
—
$55.95
COMP Cams replacement High Energy timing chains are a solid choice for many applications. They are designed as replacement parts for COMP Cams High Energy Timing sets that meet or exceed all OE specifications, which makes them a good selection for RVs, street rods, or daily drivers.
( 3 )
$52.95
COMP Cams aluminum roller rocker arms are made from a high-quality alloy, anodized for durability and good looks. They have needle-bearing trunnions to allow for high valve spring loads (over 350 lbs.) and a tensile strength of 80,000 psi. While these rockers are more expensive than COMP Cams High Energy or Magnum rockers, they're a great choice for any race application.
Not Yet Reviewed
$104.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
