Availability
Chevrolet Performance 430 HP LS3 Engine Controller Kits
These Chevrolet Performance 430 HP LS3 engine controller kits include all of the components required to run your Chevrolet Performance Parts crate engine. They include an engine harness, a mass airflow meter with a mounting boss, oxygen sensors (2) with weld-in bungs (2), an accelerator pedal assembly, and a detailed instruction sheet. The kits have been specially preprogrammed for retrofitting a late model 6.2L LS3 Chevrolet engine in your street rod, hot rod, or musclecar.
Not Yet Reviewed
$2,320.99
Chevrolet Performance 480 HP LS3 Engine Controller Kits
Chevrolet Performance 480 hp LS3 engine controller kits include all of the components required to run your Chevrolet Performance Parts crate engine. They include an engine harness, a mass airflow meter with a mounting boss, oxygen sensors (2) with weld-in bungs (2), an accelerator pedal assembly, and a detailed instruction sheet. The kits have been specially preprogrammed for retrofitting a late model 6.2L LS3 Chevrolet engine in your street rod, hot rod, or muscle car.
( 1 )
$2,257.99
Chevrolet Performance LT4 Engine Controller Kits
Chevrolet Performance LT4 engine controller kits are fully integrated, stand-alone kits designed to run LT4 Series crate engines. Each kit features: * Engine Control Module (ECM—unique to LT4 automatic transmission/T56 manual transmission or 8-speed automatic transmissions) * LT4 engine harness—unique to each kit * Mass airflow sensor * Mass airflow sensor bracket * MAF bolt/screw/washer * Accelerator pedal * Oxygen sensors and mounting bosses * Fuel line pressure sensor * Fuel pump power module * Bolt/screw—M8 x 1.25 x 25 * Bolt/screw—M8 x 1.5 x 30 * Emblem * I-sheet (instruction sheet)
Not Yet Reviewed
$3,052.99
—
$4,241.99
Chevrolet Performance Bowtie Big Block Chevy Cast Iron Engine Blocks
Chevrolet Performance Bowtie big block Chevy cast iron engine blocks are CNC-machined. The race-prepared blocks feature blind head and accessory mounting bolt holes, a deck configuration that enables the use of any big block Chevy cylinder head—and cylinder bores that may be safely bored to a 4.600 in. maximum diameter, while maintaining a .250 in. minimum cylinder wall thickness. These engine blocks differ from the production-machined Bowtie versions in certain areas; they start from raw castings and are not "conversions." They also use a rear seal adapter to convert the Gen V/VI one-piece rear main seal to a Mark IV type 2-piece seal that facilitates the use of a widely available Mark IV style crankshaft. The intermediate caps also feature 16 splayed outer bolts, which anchor the caps into the strongest section of the blocks and prevent bearing cap movement under high loads. The main oil gallery on these blocks is relocated and enlarged to a 9/16 in. diameter to allow increased oil flow through the block. These Bowtie blocks have inner head bolt bosses, which allow for better retention of the cylinder heads in high-horsepower applications when the cylinder heads "lift" from the blocks due to high cylinder pressures. Order the style and deck height preferred for your application.
( 7 )
$4,305.99
—
$4,521.99
Chevrolet Performance 502 Mark IV/Gen VI Bare Blocks
The Chevrolet Performance 502 Mark IV/Gen VI bare block is a high-strength, cast-iron, 4-bolt main engine block designed for building robust big block Chevy engines, suitable for high performance street or marine applications. It bridges Gen VI and Mark IV designs, featuring a 4.470 in. finished bore, a 9.800 in. "short-deck" height, and one-piece rear main seal, making it ideal for 502 cu. in. (8.2L) engines. The "short-deck" block was designed to meet the needs of powerful and reliable 500 c.i.d. street or marine engines. The block cylinder walls are Siamesed and are bored to 4.47 in. The deck surfaces are reinforced to enhance the head gasket seal. Four-bolt main bearing caps are utilized to strengthen cylinder barrels and add strength to the bottom-end. Standard decks of 9.800 in. are employed on these blocks. They're used on 502 engine assemblies and partial engines, and can use roller or standard tappet camshafts. 502 Mark IV/Gen VI bare block details: * New design casting incorporating the best designs of Mark IV and Gen VI * Production-type cast iron 4-bolt block * Improved main bearing bulkheads—Bowtie block-style bulkhead * Clearanced for bigger strokes * 4.470 in. finished bore * 4.500 in. max bore (Siamese) * Fuel pump pad has been added/machined * New water jackets for use with Mark IV or Gen VI heads * Revised oiling to allow for bigger cam bearings/cam lift * Bolt boss (machined) added near distributor hole like 8.1L * Can be drilled for use with 10-bolt front timing cover * Additional clearance added for roller timing chains * Auxiliary oil pressure line added to front of block * Racing-style oil filter cast feature with added oil pressure port * Two bosses added for manual transmission clutch pivot (machined) * Additional material added around lifter bosses Additional specs: * Deck Height: 9.800 in. * Fuel Pump Boss: Yes * Cylinder Wall: Siamese * Bore Range: 4.470 - 4.500 in. * Main Bolt: 4 * Main Bolt Degree: Straight * Cap Material: Cast Iron * Crank Journal Diameter : 2.750 in. * Oiling: Wet * Seal Type: 1-Piece * Max Stroke: 4.250 in. * Weight: 269 lbs. * Max horsepower: 700 * Usage: Mod
( 1 )
$4,098.99
Chevrolet Performance Engine Controllers
Chevrolet Performance engine controllers are individual units for your LS crate engine. They are identical to those included in their kits. Maintain the intellect of your Gen III/IV LS or Gen V LT-powered project vehicle with the "brains" designed to work flawlessly--Chevrolet Performance engine controllers.
( 1 )
$2,320.99
—
$2,383.99
Chevrolet Performance LS7 Engine Controller Kits
Chevrolet Performance LS7 engine controller kits are calibrated to run your 2007-2013 LS7 crate engines. These module and harness kits are designed for easy plug-and-play installation, and are inclusive for all components needed to get your LS-family engine running. These Chevy Performance kits include: * Controller * Engine harness * Mass airflow meter and mounting boss * Accelerator pedal assembly * 2 oxygen sensors and bosses * Instruction sheet
Not Yet Reviewed
$2,225.99
Chevrolet Performance Serpentine Accessory Drive Kits
These Chevrolet Performance serpentine accessory drive kits include the brackets, pulleys, and hardware that your engine needs, saving you the time of obtaining and matching them individually. You can depend on Chevrolet for the performance parts that you need.
( 1 )
$2,368.99
Chevrolet Performance ZR2 Ball Spline Half Shaft Kits
The ZR2 ball spline half shaft kits are part of the Chevrolet Performance off-road component collection, which aims to provide racing-proven durability for the Colorado ZR2 platform. The ZR2 ball spline half shafts feature fixed inner and outer double offset joints and a plunging ball spline shaft allowing for larger joint angles, compared to production ZR2 half shafts, accommodating lifted or leveled 2017+ Colorado ZR2 models. The kits provide improved articulation while reducing feedback forces through the steering system during hard cornering and they are designed and validated for severe duty off-road events where speeds and loading conditions are pushed to extremes. These kits include both ball spline half shafts, as well as the wheels nuts for complete installation.
Not Yet Reviewed
$4,787.99
Chevrolet Performance LSX Bowtie Engine Blocks
Chevrolet Performance LSX Bowtie engine blocks are designed for the advanced competition engine builder. They feature Siamese cylinder bores and a semi-finished deck height. The blocks can accept a maximum stroke of 4.250 in., a maximum bore of 4.250 in., and can support displacements of 454 cu. in. or more. LSX Bowties feature cast iron construction with an orange powdercoat finish. They accept all Gen III and IV LS-style cylinder heads, crankshafts, camshafts, and other components. Order the model with deck height and other options needed for your application. Additional features and specs include: * Front oil feed lines that can be plugged or restricted for mechanical flat tappet or mechanical lifter applications * Can be safely machined to 9.200 in. deck height * 1054 billet steel 6-bolt main bearing caps * 6-bolt cylinder head bolt pattern * Cam bores that can be machined to accept 60mm roller bearings * Can be machined for larger diameter lifters * External oil pump feed at the rear * Added 7th transmission bolt hole to work with early-style GM transmissions * Can accept a front motor plate for racing use * Threaded freeze plugs that can be used for external heaters or coolers * Windowed main bulkhead
( 1 )
$4,794.99
Chevrolet Performance SuperMatic Transmission Control Systems
Chevrolet Performance SuperMatic transmission control systems make it easy to connect and cruise. These controller kits complement the ready-to-run convenience of your crate engine with plug-and-play operation. There is no additional wiring, and the leads are clearly marked to link up with the engine control harness. SuperMatic control systems are pre-programmed to provide full-function transmission operation after completing the connections. No laptop programming is required. Chevrolet revised the systems with a more compact design for a headache-free installation with your carbureted small block, big block, or ram jet engine—and they're compatible with OBDII code readers. Get in gear with the simplicity and improved shift performance offered by Chevrolet Performance SuperMatic transmission control systems.
Not Yet Reviewed
$2,271.99
Chevrolet Performance LSX Cylinder Heads
Great cylinder head airflow is yours with Chevrolet Performance LSX cylinder heads. With power-building attributes, these aluminum heads are manufactured from 319-T5 aluminum alloy and assembled with premium lightweight hollow-stem valves, sodium-filled exhaust valves and--on some models--titanium intake valves. Ensure maximum airflow and exceptional performance with Chevrolet Performance LSX cylinder heads.
Not Yet Reviewed
$2,214.99
Chevrolet Performance LS427/570 Engine Controller Kits
Chevrolet Performance controllers are uniquely calibrated for installation in older vehicles—unlike the controllers from regular-production vehicles. That means many features required for late-model production vehicles are "turned off" because they are not required in older cars and trucks. This helps to prevent the unnecessary triggering of diagnostic trouble codes that could possibly affect performance or require additional calibration adjustments. These engine controller kits are designed exclusively for Chevrolet LS427 570 horsepower wet sump LS7 crate engines. If you have a late model Chevy, you'll want this kit! The kit includes: * Engine controller * Wiring harness * Mass airflow meter * Throttle pedal assembly * Oxygen sensors
Not Yet Reviewed
$2,023.99
Chevrolet Performance LT1 Wet Sump Hydraulic Power Steering Add-On Kits
Chevrolet Performance LT1 wet sump hydraulic power steering add-on kits include all parts to mount/add a hydraulic power steering pump to LT1 wet sump engines only. Additional details: * Mounts to LH side of engine * Uses unique cast mounting bracket * Uses modified production PS pump with 1500 psi relief valve setting * Unique billet pulley * LT4 production balancer and bolt included * 7-rib stretchy belt drives PS pump on unique belt track * Kit includes: 1 - Accessory drive PKG Serp Instr 1 - Bracket P/S pump 1 - Pump pkg - P/S 1 - Pulley P/S pump 8 groove 1 - Balancer Asm CR/SHF 2 - Bolt/Screw, CR/SHF balancer 3 - Bolt Hvy HX Acorn Flg Hd 2 - Bolt Hvy HX Acorn Flg Hd 1 - Belt P/S pump Chevy Perf LT1
Not Yet Reviewed
$2,246.99
Chevrolet Performance LSX-SC Cylinder Heads
Chevrolet Performance LSX-SC cylinder heads are developed for big-boost levels and high-horsepower engines. Undergoing a Hot Isostatic Pressing (HIP), this process is a way of casting that removes the air pockets while improving the mechanical properties of the components. LSX-SC cylinder heads are the same ones you'll see on Chevrolet's COPO 350 engine. They're available in three different configurations: as-cast; bare with CNC-machined features; or fully assembled CNC-machined cylinder heads complete with valves and springs. Features and benefits include: * Signature LSX 6-bolt head-clamping pattern * Increased deck thickness from 0.650 in. to 0.750 in. * Exhaust face thickness increased from 0.177 in. to 0.300 in. * Dense T356 aluminum material
Not Yet Reviewed
$2,358.99
Chevrolet Performance LS7 Cylinder Heads
Great cylinder head airflow has been a key enabler of the LS-Series' exceptional performance. Chevrolet Performance delivers those power-building attributes to you with a range of production-style aluminum heads. From the LS6 heads for smaller-displacement engines, to LS7 style heads for 427 in. and-larger combinations, these bare cast aluminum heads benefit from extensive research and development—ensuring maximum airflow without compromises. In fact, many professional builders use these heads as straight bolt-ons with no further machining. The engine cylinder heads are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These replacements are the true OE parts installed during the production of or validated by GM for select vehicles. LS7 CNC-ported cylinder head assembly notes: * 356-T6 aluminum head * Fully CNC'd ports and chambers * LS7 rectangle port design * Minimum 4.100 in. bore * 270cc CNC'd intake ports, 85cc CNC'd exhaust ports * 70cc CNC'd combustion chambers * Capable of over 600 hp Aluminum LS family head technical notes: * Manufactured from 319-T5 aluminum alloy * High-efficiency combustion chambers * Symmetrical intake and exhaust ports * Angled spark plugs (14mm; 5/8 in. hex; 3/4 in. reach; taper-seat plugs) * 15 degree valve angle (except C5R and LS7) * Bolt-down-type rocker arms (except LSX-DR, LSX-CT) * Centerbolt valve cover hold-downs * Fits Gen III and Gen IV small blocks only NOTE: Chevrolet Performance heads will not fit 4.8L and 5.3L engines, due to their smaller bore sizes.
Not Yet Reviewed
$3,408.99
Chevrolet Performance 4.3L 262 C.I.D. Remanufactured Long Block Crate Engines
Restore your vehicle's power by installing a Chevrolet Performance 4.3L 262 c.i.d. remanufactured long block crate engine. Assembly features include: * Cast iron block * Cast, internally balanced crankshaft * Cast connecting rods * Shot-peened and magnafluxed * Pistons * Hydraulic roller or flat tappet camshaft and lifters * Cast iron cylinder heads
( 1 )
$4,496.99
—
$4,999.99
Chevrolet Performance Gen V LT1 Head and Camshaft Kits
Chevrolet Performance Gen V LT1 head cam kits will increase your already-strong LT1. With CNC-ported heads and a camshaft designed specifically for direct injection, these kits offer the first "Hot Cam" for the Gen V LT1. Your kit may include: * Camshaft * Valve lifter guide * Valve lifters * CNC cylinder head assembly Note: Recalibration is required for accurate engine operation.
Not Yet Reviewed
$3,962.99
Chevrolet Performance Engine Controller Kits
Chevrolet Performance engine controller kits are the brain of GM vehicles. They are true stand-alone systems that will get your project up and running with ease. These controllers are specifically calibrated for your engine application—and include all the components required to connect to the engine and ECM. Detailed GM instructions will guide you through the process to ensure a perfect installation for the beginner or the professional.
Not Yet Reviewed
$2,196.99
Chevrolet Performance Automatic Transmissions
Do you need a new tranny? If so, then pick up one of these Chevrolet Performance automatic transmissions. They are available in a variety of styles and configurations, so we are sure to have one to fit your vehicle. These Chevrolet Performance automatic transmissions are designed to replace your OEM transmission without any needed modifications. They consist of all-new Chevrolet Performance parts, so you know that these transmissions are built to last.
Not Yet Reviewed
$2,741.99
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster