Availability
These Chevrolet Performance Parts LS 376/525 hp engine controller kits are designed for controlling your GM LS 525 hp engine. They include a new controller, engine harness, mass airflow meter, mass airflow meter mounting boss, accelerator pedal assembly, two oxygen sensors, two oxygen sensor mounting bosses, and an instruction manual.
( 1 )
$2,225.39
Chevrolet Performance 480 hp LS3 engine controller kits include all of the components required to run your Chevrolet Performance Parts crate engine. They include an engine harness, a mass airflow meter with a mounting boss, oxygen sensors (2) with weld-in bungs (2), an accelerator pedal assembly, and a detailed instruction sheet. The kits have been specially preprogrammed for retrofitting a late model 6.2L LS3 Chevrolet engine in your street rod, hot rod, or muscle car.
( 1 )
$2,167.43
Chevrolet Performance MAP sensors are high-quality, direct-fit replacements for worn or malfunctioning MAP (manifold absolute pressure) sensors. These sensors accurately produce voltage or frequency as intake manifold pressure changes--and the computer uses this information to measure engine load so that the ignition timing can be advanced and retarded as needed. The MAP sensors are available to fit most GM engines, including the LS Series. They're built from factory-style materials and easily install in the stock location, so no modifications are necessary.
( 1 )
$44.99
—
$72.99
Chevrolet Performance Parts LS controller kits have everything that you need to properly tune your Chevrolet Performance Parts crate engine. Kits include: * ECU * Engine wiring harness * Mass airflow meter * Mass airflow meter mounting boss * Accelerator pedal assembly * Two oxygen sensors with mounting bosses * Detailed instruction sheet
( 1 )
$2,167.43
Engine knock is one of the most unwelcome problems to plague a vehicle. When your ignition timing becomes faulty, the results are felt unless corrected through a sensor. Chevrolet Performance knock sensor wiring harnesses should be used when replacing those key sensors, providing fresh OEM wiring and grommets. The harness units are available for over a hundred submodels from makers such as Chevrolet, GMC, Cadillac, Pontiac, Buick, and Hummer.
( 33 )
$74.99
If you're swapping an LS Series engine into your street rod, musclecar, or classic car, you're going to need one of these Chevrolet Performance LS engine reluctor wheels. They are designed to fit late model Generation III/IV Chevrolet LS Series engines. The reluctor wheels are available in different tooth counts to accommodate your specific year and engine combination.
( 7 )
$31.86
—
$62.52
These mini starters from Chevrolet Performance feature a compact design that delivers plenty of torque and increased clearance for extended oil pans and header exhaust systems. These lightweight and powerful starters rely on a 3.75:1 gear reduction to spin a high-compression engine.
( 17 )
$411.59
—
$510.56
Chevrolet Performance controllers are uniquely calibrated for installation in older vehicles—unlike the controllers from regular-production vehicles. That means many features required for late-model production vehicles are "turned off" because they are not required in older cars and trucks. This helps to prevent the unnecessary triggering of diagnostic trouble codes that could possibly affect performance or require additional calibration adjustments. These engine controller kits are designed exclusively for Chevrolet LS427 570 horsepower wet sump LS7 crate engines. If you have a late model Chevy, you'll want this kit! The kit includes: * Engine controller * Wiring harness * Mass airflow meter * Throttle pedal assembly * Oxygen sensors
Not Yet Reviewed
$1,889.51
Chevrolet Performance engine controllers are individual units for your LS crate engine. They are identical to those included in their kits. Maintain the intellect of your Gen III/IV LS or Gen V LT-powered project vehicle with the "brains" designed to work flawlessly--Chevrolet Performance engine controllers.
( 1 )
$740.79
Chevrolet Performance distributor hold-downs clamp your distributor securely in place. This prevents rotation and helps to keep timing locked in place. For the best fit and function, choose genuine Chevy Performance distributor hold-downs as replacements in your GM vehicle.
( 2 )
$6.99
Chevrolet Performance factory replacement dipstick tubes are designed for use with your production GM engine block and aftermarket Chevrolet Performance Parts oil pan. They're manufactured from durable materials and install easily with no modifications. The dipstick tubes are available in more than a dozen configurations for vehicles from the 1960s and up. Order the model recommended for your application.
( 95 )
$50.99
These Chevrolet Performance Parts MAF sensor housing adapters are designed to get your MAF sensor mounted properly. They are manufactured from quality materials and install onto the MAF sensor with no modifications.
( 8 )
$20.19
Chevrolet Performance spark plug wire looms are designed to secure your wires under any conditions. They will dress up your engine compartment, while keeping your ignition from any unwanted crossfires. Order the model recommended for your engine type.
( 24 )
$2.99
—
$23.94
Don't overlook the importance of a starter brace. Many starter problems in off-road applications can be traced to inadequate support for the starter motor. These braces from Chevrolet Performance significantly reduce the load on the starter nose .
( 40 )
$7.99
These Chevrolet Performance knock sensor grommets are OEM replacement grommets for your GM knock sensors. They hold the bottom of the knock sensor onto the intake valley cover on all Gen III engines, except for the LS7. If you need new knock sensor grommets, make sure that you get Chevrolet Performance OEM replacements to ensure long-lasting performance and durability.
( 3 )
$17.99
The camshaft position sensors on your engine will only work with the correct pigtail connections. Chevrolet Performance offers these pre-made pigtails to properly fit the crank position sensor or the cam position sensor on select models. Trust Chevrolet Performance for OEM wiring replacement parts and more!
( 5 )
$44.99
Ensure your engine cover stays in place with specialized mounting studs from Chevrolet Performance. They're machined from high-quality materials that meet or exceed strict quality standards. The studs are available for a wide variety of vehicle and engine applications.
( 3 )
$30.99
These Chevrolet Performance spark plug wires exhibit only 600 ohms/ft. of resistance, with high noise suppression capabilities. They feature red or black silicone 8mm outer jackets with a white Chevrolet Performance Parts logo and black boots on both ends. These Chevrolet Performance spark plug wires are manufactured with double-wall silicone construction by Packard Electric to meet Chevrolet Performance specifications.
( 1 )
$153.91
Chevrolet Performance LT4 engine controller kits are fully integrated, stand-alone kits designed to run LT4 Series crate engines. Each kit features: * Engine Control Module (ECM—unique to LT4 automatic transmission/T56 manual transmission or 8-speed automatic transmissions) * LT4 engine harness—unique to each kit * Mass airflow sensor * Mass airflow sensor bracket * MAF bolt/screw/washer * Accelerator pedal * Oxygen sensors and mounting bosses * Fuel line pressure sensor * Fuel pump power module * Bolt/screw—M8 x 1.25 x 25 * Bolt/screw—M8 x 1.5 x 30 * Emblem * I-sheet (instruction sheet)
Not Yet Reviewed
$3,003.40
—
$3,961.31
These Chevrolet Performance Bowtie Emblem spark plug wire looms feature six supports that are manufactured from stainless steel and have the Bowtie Emblem laser-cut into the support. They include nylon spark plug wire retainers and mounting hardware. The Chevrolet Performance Bowtie emblem spark plug wire looms bolt to the side of the cylinder head and run to the back of the block for easy connection to the distributor. These wire looms are designed for use with 8mm spark plug wires and can solidly hold the wire under any conditions. Dress up your engine compartment and keep your ignition from any unwanted crossfires with these Chevrolet Performance Bowtie emblem spark plug wire looms.
( 6 )
$236.35
Chevrolet Performance LS7 engine controller kits are calibrated to run your 2007-2013 LS7 crate engines. These module and harness kits are designed for easy plug-and-play installation, and are inclusive for all components needed to get your LS-family engine running. These Chevy Performance kits include: * Controller * Engine harness * Mass airflow meter and mounting boss * Accelerator pedal assembly * 2 oxygen sensors and bosses * Instruction sheet
Not Yet Reviewed
$2,189.98
Chevrolet Performance HEI (high-energy ignition) power pigtails get you properly connected to your distributor. From your tachometer and power supply to your fire stick, these are genuine HEI wiring connections for universal applications.
( 5 )
$59.83
Chevrolet Performance offers wire harness jumpers for a variety of applications, including select Chevy engines from 208 and up. These OEM-style adapters allow you to use a different type of MAP sensor (Manifold Absolute Pressure sensor) with a different engine harness, often used when swapping or upgrading engine components. The harness and extension are manufactured from factory materials and specifications to ensure proper fitment and performance.
Not Yet Reviewed
$34.85
When your OEM sensor malfunctions, replace it with a genuine Chevrolet Performance flex fuel sensors for better mpg and overall performance. These devices send data to your engine management system concerning the percentage of ethanol in your fuel; this allows you to adjust the ignition timing and fuel quantity to be injected. If you're receiving poor data, the result is poor performance. These high-quality Chevy sensors use quick-connect style fuel inlet and outlet attachments for easier replacement. Keep your dual-fuel Chevy in top running condition with Chevrolet Performance flex fuel sensors.
( 1 )
$299.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
