Availability
Here, at last, is the king of all big block crate engines from Chevrolet Performance. These 502 cu. in. engines are available unassembled or fully assembled. Each version makes extensive use of aluminum to keep weight down—including aluminum heads, intake, water pump, and valve covers. Additionally, ZZ502 c.i.d. deluxe long block crate engines are full of heavy-duty parts, such as: forged aluminum pistons, forged shot-peened steel connecting rods with 7/16 in. bolts, forged steel crankshaft, 14 in. automatic transmission flexplate, 4-bolt main blocks, stainless steel valves, 6 qt. oil pan, and windage trays. The complete Chevrolet Performance engine kits come with Gen 6 four-bolt main blocks with one-piece rear main seals. Hydraulic roller camshaft specs are: .527 in. intake lift, .544 in. exhaust lift; the duration at .050 in. for intake is 224, and 234 for exhaust with a 112-degree lobe centerline. Other features include a single roller timing chain, aluminum large oval port, and 110cc combustion chambered heads. Intake runner volume is 290cc; stainless steel valves are installed, with 2.25 in. intake side and 1.88 in. on the exhaust side. Valve springs are rated at 140 lbs. closed and 368 lbs. open, good for up to .680 in. lift. These heads have exhaust crossovers. Aluminum high-rise dual-plane square bore bolt pattern intake manifolds and an 870 cfm carburetor are also included.
( 3 )
$14,846.00
Chevrolet Performance's ZZ632/1000 deluxe long block crate engines are their biggest and baddest big blocks! They start with a tall deck Sportsman Bowtie block and an all-forged roller assembly, then add a hydraulic roller camshaft and high-flow spread-port CNC-machined cylinder heads derived from Pro Stock racing technology. The RS-X design cylinder heads feature symmetrical ports to produce similar power from all eight cylinders. ZZ632 crate engines have a crank-trigger ignition system with coil-near-plug ignition coils mounted on a unique valley plate. Included is a pre-programmed, self-learning control system for precise fuel control and amazing output on premium pump gas. These big block engines reach peak power at 6,600 rpm and rev to a recommended maximum of 7,000 rpm. Technical specs: * Bore and stroke: 4.600 in. by 4.750 in. * Power is 1,004 hp at 6,600 rpm * Torque is 876 lbs.-ft. at 5,600 rpm * Cast iron block with 4-bolt mains * Forged 4340 steel crankshaft * Forged steel H-beam connecting rods * Forged aluminum 2618 alloy pistons * Aluminum high-rise single-plane intake manifold * Dominator 4500-style throttle body * 86 lb.-hr. fuel injectors * Billet steel hydraulic roller camshaft * Valve lift of 0.780 in. intake and 0.782 in. exhaust * Camshaft duration at 0.050 in. is 270 intake and 287 exhaust * Aluminum RS-X symmetrical spread-port cylinder heads with 70cc chambers * Titanium 2.450 in. intake/1.800 in. exhaust valves with a 5/16 in. stem * 58X reluctor crank-triggered, coil-near-plug ignition * Compression ratio of 12.0:1 * Forged aluminum shaft-mount roller rocker arms with 1.8:1 ratio * Aluminum water pump * Steel 8-quart oil pan * Recommended fuel: 93 octane or higher
( 2 )
$32,935.35
Looking for more power for your ride? Want to drop your quarter mile times substantially? Does OEM reliability and parts interchangeability interest you? Well my friend, you've come to the right place. Why bother rebuilding your existing engine with old, used, and worn-out parts when you can step up to brand-new with these affordable crate engines from Chevrolet Performance. You read it right, these engines feature all-new components built and manufactured by the pros at GM.
( 2 )
$7,285.07
Chevrolet Performance LSX 454 long block crate engines are built with an all-forged, super-tough rotating assembly and feature a pair of new deep-breathing LSX 6-bolt cylinder heads. They also come dressed with great looking, all-new orange powdercoated valve covers with an engraved LSX 454 logo. With a carburetor and high-flow Chevrolet Performance intake manifold (sold separately), these engines are good for about 627 hp and 586 lbs.-ft. of torque. Due to the number of application variations, the LSX 454 crate engines do not include an oil pan, and the valve covers do not include provisions for mounting the ignition coil brackets. Other specifications include: * 4.185 in. bore * 4.125 in. stroke * Cast iron LSX Series block with cross-bolted 6-bolt main caps * Forged steel crankshaft * Forged steel connecting rods * Forged aluminum 11.0:1 compression pistons * Hydraulic roller camshaft * 0.635 in. lift intake/0.635 in. lift exhaust, 236 intake/246 exhaust duration at .050 in. lift * Aluminum LSX-LS7 cylinder heads with 70cc chambers * 1.8:1 aluminum roller rocker arms * 58-tooth reluctor wheel
( 1 )
$16,836.20
You're track-ready with extreme performance GM LSX376 crate engines. At home on the street and on the strip, these value-driven Chevrolet Performance crate engines offer lower-compression forged aluminum pistons, a tough bottom end, and high-flow heads. LSX376 engines make a perfect foundation for supercharging, turbocharging, and nitrous--all you need to do is supply the boost! Does your muscle deserve the LSX touch? Yes! Get the strength and power to build a winner with these features: * Race-bred LSX Bowtie block * High-flow LS3 cylinder heads * Blower-friendly 9.0:1 forged pistons * 14 in. automatic transmission flexplate * Unique LSX376 valve covers
Not Yet Reviewed
$13,568.04
Chevrolet Performance's 350 c.i.d. base long block crate engines are their most popular choice—because no one else can deliver as much performance for this kind of value. Chevrolet Performance believes that everyone should be able to afford a high-quality GM V8 without going broke. Got a tired, old Chevy that needs a lift? Then these replacement engines are just right for you. Chevrolet Performance 350 base long block engine assemblies start with a 4-bolt main bearing block, aluminum pistons, and a hydraulic camshaft. Then they're topped with cast iron cylinder heads designed to be extremely durable, while still providing good airflow through the engine.
( 4 )
$5,472.99
The Chevrolet Performance 5.7L 350 HO 333 HP Turnkey long block crate engines are assembled with all-new parts and high-flow heads, giving you more power than just about any production-spec small block ever installed at the factory. Designed, engineered, and tested to stringent Chevrolet specifications, these cast-iron blocks with four-bolt main caps is the foundation for the 350 HO, which is topped with iron Vortec heads fitted with 1.94/1.50 in. valves. In addition, durable rotating assembly has aluminum pistons that deliver a 9.0:1 compression ratio. Chevrolet Performance pioneered their high-performance crate engine half a century ago—and they have never stopped working to offer enthusiasts new and more powerful solutions for their projects. You've got a dream in your garage. Chevrolet Performance wants to help you bring it to life. Tech Specs: * Engine Type: Chevy Small-Block V-8 * Displacement (cu. in.): 350 * Bore x Stroke (in.): 4.000 x 3.480 * Block: Cast-iron with four-bolt main caps * Crankshaft: Nodular iron * Connecting Rods: powdered-metal steel * Pistons: cast-aluminum * Camshaft Type: hydraulic flat tappet * Camshaft Lift (in.): .435 intake / .460 exhaust * Camshaft Duration (@.050 in.): 212° intake/222° exhaust * Cylinder Heads: Vortec iron; 64-cc chambers * Valve Size (in.): 1.940 intake/1.500 exhaust * Compression Ratio: 9.0:1 nominal * Rocker Arms: stamped steel * Rocker Arm Ratio: 1.5:1 * Water Pump: cast iron, long-style * Flexplate: 12.750 in. * Recommended Fuel: premium pump * Ignition Timing: 32° Total @ 4,000 rpm * Maximum Recommended RPM: 5100 * External balance
( 1 )
$8,634.77
If it's affordable performance you're looking for to power your project vehicle, Chevrolet Performance's SP350/357 Base Chevrolet crate engine delivers! With 357 hp and a deep reserve of low-rpm torque, it quickly reminds you why Chevrolet's original 350 small block has been the industry benchmark for decades. The SP350/357 leverages the strength of a strong rotating assembly secured in a brand-new block with 4-bolt mains, along with economical Vortec iron cylinder heads. A roller camshaft optimizes driveability and airflow capability. It all adds up to a 24 hp gain over CPP's 350 HO crate engine—and a great, affordable alternative to rebuilding. This base crate engine package includes an assembled long block, including the oil pan. You finish it off your way, with the ignition system, induction system and additional accessories. SPECIFICATIONS: Engine: SP350/357 Base Horsepower: 357 hp at 5500 rpm Torque: 407 lbs.-ft. at 4000 rpm Compression Ratio: 9.0:1 nominal Block: Cast iron with 4-bolt main caps, 4.000 in. bore Crankshaft: Cast Nodular Iron Heads: Cast Iron; 64cc Chambers Valves: 1.940 in./1.500 in. Camshaft Lift: 0.473 in./0.473 in. Hydraulic Roller Duration at 0.050 in.: 215 degree/223 degree INSTALLATION NOTES: * Use the Holley 670 cfm 4-barrel carburetor P/N 19170092 to achieve the listed horsepower and torque * Requires intake manifold, carburetor, distributor, spark plug wires, and water pump to complete assembly * Requires feed line from fuel pump to carburetor * Not intended for marine applications * Balancer and flexplate are NOT included
( 2 )
$6,215.21
Chevrolet Performance CPP LT1 6.2L long block crate engines were introduced on the seventh-generation Corvette Stingray, and opened the next chapter in the long, historic legacy of small block engines. Architecturally similar to the LS family of engines, these LT1 engines feature a unique block casting, cylinder head design, oiling system and more. They're offered with a wet-sump or dry-sump oiling system. Chevrolet Performance CPP LT1 6.2L long block crate engine features and specs: * Engine type: Direct injection spark ignition Gen V small block V8 * Displacement: 376 c.i.d. * Bore x stroke: 4.065 x 3.622 (103.25 x 92mm) * Block: Cast aluminum with 6-bolt nodular iron main bearing caps * Crankshaft: Forged steel * Connecting rods: Forged powdered metal * Pistons: Hypereutectic aluminum * Camshaft type: Billet steel roller * Valve lift: .561 intake/.531 exhaust * Camshaft duration (@ 0.050 in.): 242 degrees intake/244 degrees exhaust * Cylinder heads: Aluminum, rectangular port * Valve size: 2.130 intake/1.590 exhaust * Compression ratio: 11.5:1 * Rocker arms: Investment-cast roller trunnion * Rocker arm ratio: 1.81:1 * Recommended fuel: Premium pump * Maximum recommended rpm: 6600 * Reluctor wheel: 58X * Balanced: Internal
Not Yet Reviewed
$10,641.52
Chevrolet Performance designed SP350/357 Deluxe crate engines as affordable performers to match just about any budget. Better still, they use stronger components and modern technology to make them a better alternative to rebuilding. Based on the value-driven 350 HO crate engine, their engineers swapped the flat-tappet camshaft for a hydraulic roller and added the latest small block intake manifold design. Together, they help build more power across the rpm band. These SP350/357 motors leverage the strength of a strong rotating assembly secured in a brand-new block with 4-bolt mains and economical Vortec iron cylinder heads to offer years of high-performance excitement at an excellent value. For power, durability, and affordability in the classic Chevy muscle motor, order your own Chevrolet Performance SP350/357 deluxe crate engine! SP350/357 Deluxe packages include: * Intake manifold * Distributor * Damper * 12.750 in. externally-balanced, 153-tooth, automatic transmission flexplate Installation notes: * Holley 4-barrel carb included but not installed on engine * Requires externally balanced flywheel for manual transmission * Requires fuel line from the fuel pump to carburetor * Designed for pre-1976 street vehicles or any off-road vehicle * Not intended for marine applications
( 3 )
$7,618.96
By combining the large-displacement and heavy-duty elements of the L8T 6.6L engine and a unique camshaft based off the Corvette Stingray's high-revving LT2 V-8, Chevrolet Performance engineers have created the all-new L8P 400 c.i.d. Performance crate engine. Rated at 523 hp and 543 lbs.-ft. of torque, it offers your project a unique and naturally aspirated combination of big-displacement torque and high-rpm horsepower. The L8T 6.6L foundation is the same high-strength, big-displacement engine found in the Silverado HD from 2020 to present day, featuring a forged steel crankshaft and high-strength components. Additional features such as oil-spray cooling for the pistons and a cast iron, long-skirt cylinder block with 6-bolt, cross-bolted main caps contribute to the engine's strength and durability. The new L8P builds on that with a unique, upgraded valvetrain featuring performance-oriented valves and springs, along with a unique camshaft that is based off the Corvette Stingray's LT2 engine. It has a non-active fuel management profile and more duration than the L8t's camshaft. It's the best of both engines: the largest displacement in the LT family and the power-building attributes of the Corvette camshaft. Put it to work in your project. Fast Facts: * Displacement: 400 cu. in. (6.6L) * Bore x Stroke: 4.06 in. x 3.86 in. * Crankshaft: Forged steel * Pistons: Hypereutectic aluminum * Compression ratio: 10.8:1 * Cylinder heads: Rectangular port D/I with 59.02cc chambers * Camshaft type: Billet steel hydraulic roller * Camshaft duration: 218 degree intake/231 degree exhaust at .050 in. * Fuel delivery: Direct injection with high-pressure pump * Horsepower: 523 at 5,800 rpm * Torque (lbs.-ft.): 543 at 4,800 rpm * Engine type: Gen V small block V-8 direct injection spark ignition * Block: Cast iron with 6-bolt no Dula main bearing caps * Connecting rods: Forged powder-metal * Valve lift (in.): 0.549 intake / 0.549 exhaust * Rocker arms: Investment cast roller trunnion * Rocker arm ratio: 1.8:1 * Intake manifold: Composite * Throttle body: 87mm diameter (single-bore) * Fuel delivery: High-pressure direct injection (2,175 psi / 150 bar) * Recommended fuel: Premium pump * Ignition system: Coil-on-plug * Maximum recommended RPM: 6,000 rpm * Reluctor wheel: 58X * Balanced: Internal * Note: Use with the new engine control kit, P/N 19435524, which includes a programmed controller, wire harness, pedal, oxygen sensors and mounts, MAD, fuel line pressure sensor and fuel pump power module. Flexplate P/N 12685003 must be purchased for these engines to be compatible with the 10-speed supermatic transmission. 10-speed supermatic transmission uses six bolts to attach the torque converter.
Not Yet Reviewed
$8,948.80
Chevrolet Performance 5.7L 350 C.I.D L05 Gen I 210 HP truck crate engines deliver performance and value. These long blocks start with a precisely CNC-machined 4-bolt main block, graphite coated hypereutectic pistons, and a flat-tappet hydraulic camshaft. Then they're topped with cast iron cylinder heads designed to be extremely durable while still providing good airflow through the engine. All Chevrolet Performance 350 L05 crate engines comply with an 18-step quality process, then get torque-to-turn, compression, and oil pressure-tested at the end of the line. More product features, items, and specs include: * Roller camshaft ready * Mechanical fuel pump capable * Cylinders honed on a computer-controlled machine * Forged steel crankshaft * One-piece rear seal * Powdered metal connecting rods * Silent link-type timing chain * New valve covers, oil pan, timing cover, and harmonic balancer for fewer labor hours at your installer * 210 hp at 4,000 rpm * 300 lbs.-ft. torque at 2,800 rpm * 9.4 to 1 compression ratio * Camshaft with 165/174 duration at 0.050, 0.382 In./0.402 ex. lift * 1.94 in. intake/1.50 in. exhaust valves * Center bolt cylinder heads (65.3cc chambers)
( 1 )
$5,749.99
Chevrolet Performance has recreated the classic L88 Big Block combination in the ZZ427/480 long block crate engine. Rated at 480 hp, it features an iron block, forged steel crankshaft, and high-flow aluminum cylinder heads. An upgraded hydraulic roller camshaft improves drivability and rpm range, while lower 10.1:1 compression means you can enjoy the power on pump gas, too. The ZZ427 comes complete with: high-flow oval port heads, a high-lift camshaft, aluminum intake manifold, 770 cfm Holley carburetor, an HEI distributor, aluminum water pump, balancer, spark plug wires, and a 14 in. flexplate. If you're looking for a modern version of the classic L88, the Chevrolet Performance ZZ427/480 long block crate engine is the answer. Additional specs and features include: * 4.250 in. bore with 3.750 in stroke * Cast iron block with 4-bolt main caps * Forged steel crankshaft * Forged steel connecting rods * Forged aluminum pistons * Hydraulic roller camshaft: - Valve lift .527 in. intake/.544 in. exhaust - Duration (.050 in) 224 intake/ 234 exhaust * Aluminum oval port heads with 110cc chambers * 2.190 in. intake/1.880 in. exhaust valves * 10.1:1 compression ratio * Aluminum 1.7:1 ratio roller rocker arms * HEI distributor * 770 cfm carburetor * Aluminum short water pump * Ignition timing base 10 degrees BTDC, 36 degrees total * 6,400 maximum recommended rpm
( 5 )
$16,940.27
This Chevrolet Performance 5.7L 350 c.i.d. HO turnkey long block crate engine is assembled with brand new components from General Motors. Starting with a new GM 4-bolt main block, it includes the cast iron high-flow Vortec heads, dual-plane aluminum intake manifold, 9.0:1 compression ratio, and a hydraulic flat tappet camshaft that provides you 333 hp and 381 lbs.-ft. of torque. It includes a GM HEI distributor, a 670 cfm Holley carburetor, and is shipped with a 153-tooth small diameter flexplate. Engine specs: * Block: Cast Iron, 4-bolt main caps, 1-piece rear seal * Compression Ratio: 9.1:1 * Crankshaft: Cast Nodular, 3.480 in. Stroke * Duration at 0.050 I/E: 212 / 222 * Camshaft Lift: 0.435 in. / 0.460 in. Hydraulic Flat Tappet * Heads, Chamber Size: Vortec iron, 64cc * Horsepower: 330 hp at 5,000 rpm * Intake Manifold: Aluminum Dual Plane * Torque: 380 lbs.-ft. at 3,800 rpm * Valves (I/E) (in.): 1.940 / 1.600 * Condition: New
Not Yet Reviewed
$7,311.30
Meet the newest member of the iconic 350-based ZZ engine family—ZZ6! Chevrolet Performance has rated these base crates to really deliver the power, thanks in part to their unique, lightweight aluminum cylinder heads that enable optimal airflow at high rpm. The engines are based on the proven Fast Burn design with large intake runners and valves. Along with their beehive-style valve springs that offer high-rpm efficiency and durability, the ZZ6 blocks make the most of every cubic inch of air drawn through them. Supporting the massive flow of air is an aggressive hydraulic roller camshaft and a forged steel crankshaft. The ZZ6 350 c.i.d. base crate engine kit includes intake manifold, distributor, water pump, damper, flexplate, and the distinctive, race-inspired valve covers. The legendary ZZ6 tech specs are: * Cast iron block with 4-bolt mains * Bore x stroke: 4.000 x 3.48 * Valve lift (in.): .474 intake/.510 exhaust * Camshaft duration at .050 in.: 208 degree intake/221 degree exhaust * Valve size (in.): 2.000 intake/1.550 exhaust * Compression ratio is 9.72:1 nominal * Aluminum roller-style rocker arms * Rocker arm ratio is 1.5:1 * Recommended fuel: Premium pump * Distributor: HEI * Ignition timing: 36 degree total @ 4,000 rpm * Maximum recommended rpm: 5,800 * Balance: external
Not Yet Reviewed
$9,126.05
You won't go broke finishing off your project car with this 350 Vortec c.i.d. HO turn-key crate engine from Chevrolet Performance! It's packed with all the features you need to get a reliable 330 hp and 380 lbs.-ft. of torque from a dependable, time-tested combination of GM Performance Parts. Of course, all the components used in this engine are brand new, not remanufactured parts like the competition is trying to sell you. Designed by GMPP's in-house engineers to give you maximum return for your hot rod dollar, the 350 HO Turn-Key is a great choice for your small-block crate engine needs. The 350 HO is based on a tough, Chevy 4-bolt block that holds a strong nodular iron crankshaft, good rods, and aluminum pistons. The high-lift camshaft gives the engine its own unique, aggressive idle. The cam is based on the same one found in 1965-67 Corvette 327 engines, but with more lift and duration. More product features, items, and specifications include: * Power - 330 hp at 5,000 rpm, 380 lbs.-ft. of torque at 3,800 rpm * Displacement - 350 c.i.d., 5.7L * Bore x stroke - 4.000 in. x 3.480 in. * Compression ratio - 9.0:1 * Recommended fuel - 92 octane * Block - cast Iron, one-piece rear seal, 4-bolt main caps * Crankshaft - nodular iron * Connecting rods - powdered metal steel * Pistons - cast aluminum * Camshaft - hydraulic flat tappet * Cam lift - 0.435 in. intake / 0.460 in. exhaust * Cam duration at .050 in. - 212 degrees intake / 222 degrees exhaust * LSA (Lobe Separation Angle) - 112.5 degrees * Cylinder heads - Vortec cast iron, 3/8 in. pressed-in rocker studs * Combustion chamber - 64cc * Valves - 1.940 in. intake/ 1.500 in. exhaust * Rocker arms - stamped steel, 1.5:1 ratio * Valve springs - 10212811 * Balance: external * Maximum GM recommended RPM - 5,500 * Ignition timing - base 10 degrees BTDC, 32 degrees total * Fully GM assembled long block * Chrome steel valve covers with Chevy Bowtie logo * Oil pump, pick-up and oil pan * Front timing cover * Passenger side RH oil dipstick and tube
( 1 )
$6,355.11
If you want big block power for your ride but want to have a say in the final product, Chevrolet Performance has the solution. Their 502 c.i.d. short blocks can be configured to deliver all of the muscle you want. The heart of these powerhouses is the same short block that GM uses for their 502 c.i.d., 502 hp bruiser—so you know they can crank out the power. Chevrolet starts with a Gen VI 4-bolt main block with a one-piece rear main seal and priority oiling for the main bearings. To that, they add: an externally balanced, forged crank that's shot-peened and magnafluxed; forged steel "dimple" connecting rods; forged aluminum pistons; a single-roller heavy-duty timing chain set; and a hydraulic roller camshaft. The cam has 0.527 in. of intake lift and 0.544 exhaust lift, with 110 degrees of lobe separation. Duration at 0.050 in. of lift is 224 degrees for the intakes, and 234 for the exhausts. These long blocks come complete with a powdercoated cast aluminum timing cover (will not accommodate double-row chains); aluminum cylinder heads and valve covers; a 6 qt. truck-type oil pan (will not fit Chevelle, Camaro, Nova, or Impala); a 14 in. flexplate; and an 8 in. harmonic balancer.
( 1 )
$7,715.76
Chevrolet Performance 7.4L 454 c.i.d. long block crate engines feature genuine Chevrolet internal parts. They are tested to ensure great performance under even the most demanding conditions. Assembly features include: * Cast iron block * Cast, externally balanced crankshaft * Cast steel connecting rods * Shot-peened and magnafluxed * Pistons * Hydraulic camshaft and lifters * Cast iron cylinder heads with oval ports * Timing cover
Not Yet Reviewed
$10,064.99
These Chevrolet Performance LQ4 6.0L engine assemblies are designed for late model vehicles using fuel injection. They feature a cast iron block that uses aluminum cylinder heads to maximize reliability. Just add your intake manifold with fuel injection, ignition system components, and fire up one of these Chevrolet Performance LQ4 6.0L engine assemblies.
Not Yet Reviewed
$6,824.99
Whether you're looking to build a reliable engine for towing and hauling or want the foundation for a high-performance build, the Chevrolet Performance 6.0L 366 C.I.D. L76 Remanufactured Crate Engines are a great starting point and at a more affordable cost. These crate engines boast a number of features and benefits. Each engine is tested to meet or exceed GM's original equipment specifications. Additionally, every component is inspected and replaced if necessary. As a result, these remanufactured crate engines provide excellent value and dependability. Specific information (instructions): The replacement crate engines are built with two different designed oil pans. Differences are the first design oil pan has threaded hole for oil level sensor; the second design oil pan is without hole for the oil level sensor. Transfer oil pan from original engine or procure new, if required. For C/K Trucks, G-van applications, the oil pan on the replacement engine has been upgraded with a new oil deflector (shield) installed over a new oil pressure relief valve. If transferring the original oil pan to the replacement engine transfer these new components to that oil pan. --Transfer crankshaft balancer, crankshaft sensor, camshaft sensor, sensor wiring harness and bracket from original engine or procure new. --Install new crankshaft balancer bolt that is included with engine assembly. --Refer to instruction sheet for general/detailed information and instructions on components that are required to be transferred from the original engine assembly or procured new. --Transfer crankshaft balancer, crankshaft sensor, camshaft sensor, sensor wiring harness and bracket from original engine or procure new. --Install new crankshaft balancer bolt that is included with engine assembly. The replacement engine is built with a first or second design oil pan. The first design pan has a threaded hole for applications equipped with an oil level sensor. The second design oil pan is for applications that do not use an oil level sensor; no threaded hole. Transfer oil pan from original engine or procure new, if required. The replacement engine is built with first or second design valve rocker arm covers. The first design valve covers do not use quick connect PCV tubes. The second design valve covers use quick connect PCV tubes. Transfer valve covers from original engine or procure new, if required. The replacement engine may use rivet-type plugs in place of the coolant air bleed covers located at the top rear of each cylinder head. In applications that contain the rivet-type plug, it is not necessary to install the coolant bleed covers. For LS4 Applications, transfer the A/T flywheel/flexplate locator that is pressed into the rear hub of the crankshaft from the original engine or procure new. For C/K Trucks, G-van applications, the oil pan on the replacement engine has been upgraded with a new oil deflector (shield) installed over a new oil pressure relief valve. If transferring the original oil pan to the replacement engine transfer these new components to that oil pan. For 2007 Cadillac Escalade and GMC Yukon Denali applications w/6.2L L92: Engines prior to April 2006 were built with AFM (Active Fuel Management) hardware components, but the AFM system is not enabled on the 2007 L92 engine. The replacement engine does not contain the AFM hardware; it includes a valley cover that is used in place of the VLOM (valve lifter oil manifold). Do not transfer AFM hardware to replacement engine. When performing an engine replacement on a L92 engine that was originally equipped with AFM hardware, the VLOM electrical connector must be removed from the wiring harness. Included Engine Content: * Engine Block * Pistons * Crankshaft * Connecting Rods * Cylinder Head * Camshaft * Front Cover * Housing, Cr/Shf Rear Oil Seal * Valve Cover/Cam Cover * Valve lifter Oil Manifold (VLOM) * Oil Pan
Not Yet Reviewed
$7,373.99
Chevrolet Performance 2.4L 146 c.i.d. remanufactured long block crate engines will breathe new life into your ride. They feature quality-built components for maximum durability. The long block crate engines include: * Engine block * Connecting rods * Pistons with rings * Cylinder head assembly with valvetrain * Oil flow check valves * Camshaft and lifters * Timing chain cover * Harmonic balancer, valve cover * Oil pan * Spark plugs * Water pump
Not Yet Reviewed
$6,459.99
Got a 1/2 ton, 3/4 ton, or other GM pickup with a tired, sick, or broken engine? Chevrolet Performance has exactly what you need. Their 350 c.i.d. truck long block crate engines are built up from 1996-2002 style 4-bolt main blocks with one-piece rear main seals. To this, Chevrolet adds a nodular-iron crankshaft, powdered-metal connecting rods, and hypereutectic aluminum pistons. You also get power-producing Vortec cylinder heads with 1.94 in. intake valves and 1.50 in. exhausts, and 64cc combustion chambers that yield a gas-pump friendly 9.4:1 compression ratio. This combination is paired up with a roller cam that has 0.414 in. of intake lift and 0.428 in. for the exhaust. Duration at 0.050 in. of lift is 191 degrees for the intake and 196 for the exhaust, with 111 degrees of lobe separation. These long block crate engines come complete with an oil pan, timing cover, valve covers, and harmonic balancer.
Not Yet Reviewed
$6,096.99
You can now get modern street performance in a classic small block package by installing a Chevrolet Performance SP350 385 HP turn-key crate engine. They put out 385 HP and 405 lbs.-ft. of torque for a thrilling feeling of immediate performance. The long block crate engines feature new lightweight aluminum cylinder heads based on the proven Fast Burn design—with large intake runners, and 2 in. diameter intake and 1.55 in. exhaust valves. New beehive-style valve springs enable greater high-rpm performance and durability—as the egg-shaped springs have less reciprocating mass in motion, require less spring pressure for greater valve control, and handle valvetrain stresses more efficiently. Additional features and specs of the Chevrolet Performance SP350 turn-key crate engine: * Forged steel crankshaft * Powdered metal connecting rods * Hypereutectic pistons (9.6:1 compression ratio) * Hydraulic roller camshaft: .474 intake/.510 exhaust lift, 208 intake/221 exhaust duration at 0.050 in. * 1.5 ratio stamped steel rocker arms * Externally balanced * 36 degree total timing at 4,000 RPM * Aluminum intake manifold * Chevrolet Performance valve covers * HEI distributor * Spark plugs * Water pump * Harmonic balancer * Timing cover * Oil pan * Flexplate: 153-tooth, 12.750 in. diameter * Starter * Fuel pump * Air conditioning pump * Alternator * Front-end accessory drive kit (not installed)
Not Yet Reviewed
$12,667.94
Chevrolet Performance ZZ6 EFI Turnkey crate engines build on more than 65 years of small block heritage and the legacy of the pioneering "ZZ" crate engine family to offer thoroughly modern performance balanced with traditional style. The engineers adapted a unique, electronically controlled port fuel injection system to the ZZ6 350, using an aluminum intake manifold that has the appearance of a carbureted intake. A fuel injection throttle body mounted in place of the carburetor allows a traditional air cleaner to be installed. The result is a great, traditional appearance and all the drivability advantage of EFI on the highway. A simple plug-and-play control system rounds out the package to get the engine running in your project without the need for third-party tuning. These Turnkey crate engine kits include the distributor and damper installed. The throttle body, air conditioning pump, alternator, single-belt front-end accessory drive kit, and more are also included. Installation notes: * Crate engine kit includes pre-programmed, self-learning control system * Comes with 12.750 in. externally balanced 153-tooth automatic transmission flexplate. Requires externally balanced flywheel for manual transmission. * Not intended for marine applications. SPECIFICATIONS: Engine Type: Chevy Small Block V8 420 hp at 5800 rpm 408 lb.-ft. at 4500 rpm Displacement (cu. in.): 350 Bore x Stroke (in.): 4.000 x 3.480 Block: Cast iron with 4-bolt main caps Crankshaft: Forged steel, shot peened Connecting Rods: Forged powdered metal Pistons: Hypereutectic aluminum Camshaft Type: Steel hydraulic roller Valve Lift (in.): .474 intake / .510 exhaust Camshaft Duration (at .050 in.): 208 degree intake / 221 degree exhaust Cylinder Heads: Fast Burn aluminum; 62cc chambers Valve Size (in.): 2.000 intake / 1.550 exhaust Compression ratio: 9.72:1 nominal Rocker Arms: Aluminum; roller-style Rocker Arm Ratio: 1.5:1 Recommended Fuel: Premium pump Ignition Timing: 36 degree total at 4,000 rpm Maximum Recommended RPM: 5,800 Balanced: External Flexplate: 12.750 in.
Not Yet Reviewed
$13,672.14
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
