Availability
Cardone new rack and pinion units are built better from the start. Cardone uses what they've learned from remanufacturing, as to where--and why--original parts fail. Their engineers then incorporate improvements into the Select rack and pinions, making them better than the originals. Cardone new rack and pinion units feature: * 100 percent computerized testing at load to ensure reliable performance * All rotating and actuating components are properly hardened, ground, and polished to ensure longevity of the components and their respective seals * Cardone Select Engineered (CSE) Technology ensures that all rack and pinion/gearbox units meet or exceed OE-form, fit, and function * Computerized spool valve balancing ensures exceptional feel and return-ability * Environmentally-friendly coating provides a clean appearance and prevents rust * Supplied with OE-grade seals, O-rings, and boots to provide optimal sealing performance and longevity
( 11 )
$361.99
Cardone engineers have meticulously designed and tested their new power steering pumps to fit and perform like the original. Building on decades of experience, each unit is supplied with premium high-temperature seals and reservoirs for easy installation and reliability you can count on. Build it better; order the Cardone new power steering pump designed to fit your application. Features and benefits: * 100 percent computer load testing ensures optimal performance and durability by incorporating real-world parameters during the test cycle * Precise bushing alignment prevents premature shaft and seal wear, significantly reducing noise and vibration * Units are supplied with reservoir and cap (when applicable) to reduce installation time and prevent contamination from trapped debris
( 34 )
$112.99
Cardone new distributors offer OE fit and form, built better! Cardone has seen where and why parts fail, so their new distributors are built with technology and design—plus, they're 100 percent computer-tested for guaranteed, long-lasting performance. Cardone also knows that a part has to look good, so their distributors are appearance-inspected for complete satisfaction. New distributors include the cap and rotor to make your installation a snap. For quality and reliability backed by nearly a half-century of experience, order the Cardone new distributor designed for fitment on your vehicle.
( 166 )
$66.99
—
$122.99
Cardone new rack and pinion bushings enhance road feel and provide greater durability than typical rubber bushings. These urethane replacements are also supplied with steel inserts. They're available for a wide range of vehicles, including Ford, Lincoln, and Mercury applications from 1974 and up. For premium-quality, brand-new parts you can rely on, trust the experts at Cardone.
( 5 )
$36.99
Remanufactured? You bet! Cardone delivers power steering control valves that are as good as new ... at a much better price! Each valve is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort, and noise to ensure quiet, like-new performance. They're supplied with all-new OE-style seals and O-rings for leak-free performance. And, during this process of disassembling, cleaning, and restoring, Cardone is saving energy, raw materials, and our environment by recycling and refurbishing. With quality and a conscience for the world around us as the foundation of their business culture, you can expect nothing less than top-notch power steering control valve replacements from Cardone.
( 7 )
$247.99
Cardone remanufactured power steering pumps are among the highest quality remanufactured parts in the aftermarket. That's because they don't just replace components as needed. Through reverse engineering, their technicians pinpoint original equipment design weaknesses by examining failed cores. You'll benefit from the Cardone expertise when you order the remanufactured power steering pump designed to fit your application. Features include: * All critical components are triple-tested to ensure reliability * All units are built with 100 percent new O-rings and premium-grade Viton® seals to prevent leaks and avoid high-temperature breakdown * Every pump is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort, and noise * Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life * Units are supplied with 100 percent tested and calibrated pressure relief valves * Cardone remanufactured parts are business and environmentally friendly
( 48 )
$47.99
Cardone New steering boxes are "built better from the start." The same reverse-engineering experience Cardone has gained from over 45 years of remanufacturing is the foundation of their Cardone CSE Technology. Their engineers incorporate improvements into the new boxes to prevent the "where and why" of typical failure. Cardone New steering boxes feature: * 100 percent computerized testing at load to ensure reliable performance * All rotating and actuating components are properly hardened, ground, and polished to ensure longevity of the components and their respective seals * Cardone Select Engineered (CSE) Technology ensures that all rack and pinion/gearbox units meet or exceed OE form, fit, and function * Computerized spool valve balancing ensures exceptional feel and return ability * Environmentally-friendly coating provides a clean appearance and prevents rust * Supplied with OE-grade seals, O-rings, and boots to provide optimal sealing performance and longevity
( 12 )
$353.99
Cardone remanufactured brake calipers are the economical choice when replacing your worn-out OE parts. An essential component of a disc braking system, calipers slow your wheels by creating friction between the pads and rotors. These refurbished units offer a high-quality, low-cost alternative to new calipers. Cardone meticulously rebuilds, greases, and thoroughly inspects the final product before shipment. The calipers are offered with or without brackets (depending on the application) and include hardware. Thousands of options are available for fitment on virtually every make/model vehicle.
( 52 )
$26.50
—
$49.50
Cardone features rack and pinion hydraulic transfer tubing assemblies to replace rusty and leaking lines. Since these lines aren't typically available from the manufacturer, these quality direct replacements can help get you back on the road at a fraction of the cost of an entire rack and pinion assembly replacement. The new assemblies are pre-bent with fittings, and are designed to meet OEM performance for form, fit, and function. These Cardone rack and pinion hydraulic transfer tubing assemblies include the necessary components needed to complete the job. Order the rack and pinion hydraulic transfer tubing assembly best suited to fit your application.
( 1 )
$47.99
Clearance
Cardone remanufactured power brake boosters have 100 percent OE-quality seals, diaphragms, and check valves installed for performance and reliability. All units are thoroughly vacuum-tested to ensure reliable performance. Each master cylinder and booster assembly is covered with an exclusive rust-prohibitive finishing process to extend on-car life. For easier installation, master cylinder output rods are pre-adjusted on applications where they're included. New mounting nuts and washers ensure proper, hassle-free installation. Make braking a breeze when you install economical Cardone remanufactured power brake boosters.
( 49 )
$77.99
—
$85.99
$59.50
—
$69.50
Stop premature power steering system failure due to contamination with Cardone Magna-Pure inline power steering filters! Using patented bypass filtration technology and a magnetic filter element, these filters trap debris before it can clog or erode your power steering system. Magna-Pure filters are constructed from durable, high-grade aluminum with a serviceable magnetic element and leak-free connections. Cardone Magna-Pure inline power steering filters protect your power steering system components from premature damage, saving you time and money! Order the model designed for your vehicle application.
( 8 )
$28.99
Clearance
Make a clean sweep with Cardone remanufactured windshield wiper motors. They meet or exceed OEM specifications, and original design weaknesses are corrected for longer life. Motor magnets are recharged and connectors are anchored mechanically using through-hole soldering for stronger, longer-lasting electrical connections. Motors are tested at two points in the remanufacturing process, and all critical components are triple-tested. All Cardone remanufactured windshield wiper motors are assembled with the precise amount of lubricant to ensure quiet operation and long life.
( 22 )
$87.99
$49.50
Clearance
Cardone new throttle bodies are guaranteed to fit and function like the original, due to Cardone's proprietary engineering standards. Each replacement unit is built and tested as a complete assembly to ensure quick installation and reliable performance. All components match the original equipment, ensuring accurate airflow in all driving conditions and peak engine performance. Order the model recommended for your vehicle.
( 1 )
$162.99
Clearance
For over 40 years, Cardone's innovative remanufacturing processes have provided a high-quality, lower-cost alternative to new replacement parts. It doesn't matter if your vehicle is vintage or fresh off of the dealer's lot--Cardone is your source for the highest quality remanufactured parts. Through "reverse-engineering" failed parts, their engineers see where, and why, they failed. They reengineer their remanufactured products, where applicable, to reinforce failure-prone areas for longer-lasting performance. Cardone remanufactured parts cost up to 50 percent less than new--especially true with late-model, high-tech products. Cardone restores used auto parts back to their original fit and function, using only about 20 percent of the energy and raw material needed to build a new part; so you not only save money, but you also help save our planet. Features of Cardone remanufactured distributors include: * All electronic module components are 100 percent computer-tested to ensure full functionality * Automated test equipment verifies signal strength, correct polarity of wire harness, air gap, and crank reluctor tooth size, as well as ignition coil and pickup performance * Cardone uses the right gear hardness for the appropriate application: if the gear is too hard, it will damage the cam; if it's too soft, the gear itself will be damaged, potentially causing severe engine damage (many offshore manufacturers use only one gear hardness) * OE components with consistently high failure rates are 100 percent replaced or repaired to meet or exceed OE performance * Precise machining tolerances prevent oil leakage, poor timing, the setting of the "Check Engine" light, and premature failure
( 13 )
$66.99
$40.50
Clearance
Cardone's remanufactured caliper brackets are the perfect complements to their brake calipers. These mounting brackets feature durable cast iron or steel construction, coated with rust protection, and are also ideal replacements for your bent, worn, or damaged OEM caliper brackets. For top quality at a value-packed price, order the brackets designed for your vehicle application.
Not Yet Reviewed
$22.99
—
$36.99
$13.50
—
$29.50
Clearance
Cardone remanufactured throttle bodies use 100 percent computerized testing of motor, throttle position sensor, and articulation to ensure reliable and consistent performance. Each unit is disassembled and every component is inspected, remanufactured or replaced to ensure a durable, high-quality product. Specialized component cleaning processes prevent the throttle bore surface from being deformed—facilitating optimum airflow. For impeccable fit, function, and savings, order the Cardone remanufactured throttle body designed for your vehicle application.
( 6 )
$102.99
$71.50
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
