Availability
All the quality, reliability, and workmanship you have relied upon for years from the Compstar lineup is taken to the Xtreme--Callies Compstar Xtreme connecting rods. Specifically designed for power adder and diesel applications, these rods utilize the same proven 4340 material and ARP 2000 or L19 fasteners. Strength was added by thickening up the flanges of the H-beam and a reduced depth-of-cut towards the center of each rod, then non-essential weight is taken out of the beam to help keep the overall weight of these Xtreme rods in check. Choose a set for your high output, boosted application.
Not Yet Reviewed
$928.00
—
$1,008.00
You're installing value without compromising quality with Callies Compstar crankshafts. Finished and inspected by Callies, Compstar cranks maintain proper geometry and design. Hardened with deep nitride, They're ideal for all types of abusive racing environments and available in a wide variety of strokes and journal sizes to fit most common cubic inch requirements. All rod journals are drilled and counterweights are profiled for piston clearance. Sometimes you need to race within a budget, but with Callies' consistent grind and polish, as well as their precise stroke and index, you don't need to compromise on quality. Choose Callies Compstar crankshafts--they're better by design.
( 10 )
$786.00
—
$1,196.00
Better by design, Callies Compstar connecting rods offer high performance and a trouble-free engine build. Concerns about out-of-round, big-end bore sizing, repeatability, time-saving details, and upgrade costs are a thing of the past. Their forged 4340 steel rods are put through a lengthy stress-relief process and burnishing of threads and bolt spot faces to ensure dimensional repeatability, no matter how many times rods are torn down and reassembled. Pin bushings are chamfered and honed, parting line edges are generously chamfered, and bearing locating tab slots are deburred, all in an effort to save you time and trouble. ARP 2000 bolts and stroker clearances are standard with Compstar rods. Choose either their original H-beam design or heavy-duty I-beam designed rods. For high performance use right out of the box, plus value and peace of mind, try Callies Compstar connecting rods.
( 18 )
$130.00
—
$976.00
Callies Mopar engine blocks are Officially Licensed Mopar products. Together with Energy, Callies will manufactured and distribute cast iron engine blocks and components. All parts manufactured will carry authentic Mopar part numbers and be produced from original Mopar molds, cores, and engineering data. The Mopar blocks are being offered in different bore sizes in finished and RoughBore (RB) versions.
Not Yet Reviewed
$2,202.04
—
$6,039.00
Utilizing the latest in computer aided solid modeling and CNC machining centers, Callies offers the best designed, highest quality crankshafts, connecting rods, and camshaft inventory available on the market today. Callies understands not everyone has the need or budget for a Magnum or billet crankshaft, but still may want a product with more to offer than their Compstar line. Callies went to work for a solution, which culminated in the creation of their Apex Series of crankshafts. The Apex crankshafts are made on the same forgings that Callies uses to make their Magnum Series but are machined by the supplier that makes the Compstar line. Like Compstar, the Apex crankshafts are finish sized and fully inspected in-house. This results in the best bang-for-your-buck crankshaft on the market. Callies takes pride in staying ahead of the competition with the latest high tech design and manufacturing advantages of their products. Callies Apex LS/LT standard features include: * Made on Callies proprietary Magnum forging * Ultra-pure, premium 4340 material machined by Callies vetted and reliable Compstar supplier * Machined by Callies vetted and reliable Compstar supplier * Nitrided for optimal hardness and wear resistance * Every crankshaft is finished and inspected in-house at Callies Limited stroke and pin size combinations * Limited stroke and pin size combinations
Not Yet Reviewed
$2,493.00
When you need lighter-than-standard-weight crankshafts, check out Compstar mid-weight crankshafts from Callies. These cranks are deep nitride hardened and feature drilled rod journals and profiled counterweights for piston clearance. They have a consistent grind and polish, as well as a precise stroke and index. Better by design, Callies Compstar mid-weight crankshafts offer you competitive pricing without compromising quality.
( 3 )
$854.00
Callies Ultra connecting rods are made with pride to exacting specifications. They are produced from extremely clean Timken steel, meticulously crafted with great attention to detail. If you choose Callies Ultra connecting rods, be confident of dependable performance and outstanding workmanship.
Not Yet Reviewed
$450.00
—
$1,952.00
Race smart with Magnum durable competition crankshafts from Callies. Manufactured from ultra-pure AISI 4340 steel, these cranks are subjected to multiple heat treatments, giving them unsurpassed wear and strength characteristics. With their gundrilled mains and fully profiled counterweights, you may choose from an available selection for a variety of engine types. You just can't beat the proven reliability and value of Callies Magnum crankshafts.
( 2 )
$3,124.00
—
$3,721.00
A good foundation can make your build a success. Callies Mopar Drag Pak engine blocks are Gen III cast aluminum engine blocks officially licensed by Mopar and produced by Callie's sister company, Energy Manufacturing. Start your build with the right "Energy"—a Mopar Drag Pak engine block. Drag Pak block specs: * 9.25 in. deck height * 6.1 timing drive, No VCT solenoid * .937 keyway lifter bushings, require finish hone * 60mm RB cam bore, bearings not included * Delivered with 4.120 in. bores, require finish honing to 4.125 in. * 4140 q/t billet main caps * 4-bolt M1 and M5, 6-bolt M2 to M4 * 1/2 in. head studs available
Not Yet Reviewed
$10,502.00
Your future is in the stars! Callies Compstar Comet crankshafts answer your wishes for lightweight crankshafts that perform. The nucleus of these celestial crankshafts is 4340 forged steel that is triple heat-treated and nitrided. They are then the mains are gun-drilled, the rod journals lightened, the counterweights pendulum-cut, and they're given a star flange. The journals are polished to 5Ra or less and have a star-bright shine. They're light in weight but big in performance and quality.
Not Yet Reviewed
$1,020.00
Keeping the valvetrain under control is vital to a successful engine program. Callies LS hydraulic roller camshafts feature lobe profiles designed to produce excellent power without sacrificing durability. They are precision ground using Landis CNC grinders, with event timing and lobe profile tolerances verified in Callies ADCOLE inspection gages. With a long history of superior quality grinding experience, Callies is the right choice for all your camshaft needs. Select the LS hydraulic roller camshaft with the specs to meet your build's needs.
Not Yet Reviewed
$423.00
—
$425.00
A good foundation can make your build a success. Callies Mopar Hellephant engine blocks are Gen III cast aluminum engine blocks officially licensed by Mopar and produced by Callie's sister company, Energy Manufacturing. Start your build with the right "Energy"—a Mopar Hellephant engine block. Hellephant block specs: * A-355 aluminum * 9.25 in. deck height * 6.2/6.4 timing drive, VCT solenoid * Standard lifter pattern, .842 lifter bores * Standard cam bore, bearings installed * Delivered with 4.120 in. bores, require finish honing to 4.125 in. * 4140 q/t billet main caps * 4-bolt M1 and M5, 6-bolt M2 to M4 * M12 head studs available
Not Yet Reviewed
$9,364.00
Callies Compstar Sport Series crankshafts are intended for high-rpm, high-output engines. They are finished with the same care and detail as the entire line of Compstar crankshafts, including Callies' stringent quality control final check. All Sport Series crankshafts by Compstar are balanced and ready for assembly, and they feature the best metallurgy and heat treatment on the market today. Choose the ideal crankshaft designed for your vehicle's engine.
Not Yet Reviewed
$1,713.00
Callies Ultra Enforcer connecting rods are produced from extremely clean TimkenSteel product that is formulated to exact specifications. This proprietary steel is forged in Trenton, Michigan, and manufactured 100 percent in Callies' Fostoria, Ohio facility. Pride in workmanship and attention to detail are qualities you'll discover during careful examination of the finished products. Each step of the manufacturing history of every Ultra connecting rod is meticulously maintained by the Callies manufacturing team. You can be confident of the material and workmanship of these quality components. Designed with fortified tower flanges, Enforcer I-beam connecting rods are the ideal component for turbocharged and supercharged engines. Order the model recommended for your vehicle. Standard features: * Produced from clean 4330V TimkenSteel product * Intended for boosted applications * Buckle resistant I-Beam design * Increased mass, pressure Angle Arches, guarantee wrist pin stability * Robust tower flanges provide enhanced resistance to bend and twist * 2,400 hp per cylinder capability * L-19 bolts, Multi Phase 3.5 available
Not Yet Reviewed
$1,952.00
Callies Ultra XD connecting rods are configured to provide greater flexibility in cam selection for your stroker engine build. Their canted housings allow a larger lobe/base circle/lift camshaft to be selected. Callies Ultra XD connecting rods provide greater rod to cam clearance to improve valvetrain performance. In most cases, Ultra XD rods will provide approximately .050 in. more cam clearance than Callies conventional Ultra rods, and substantially more than many competitors' rods. These rods are machined from premium Timken 4330 steel and are intended for severe-duty applications.
Not Yet Reviewed
$1,952.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
