Availability
Feed your ride the air and fuel it needs to propel you to the finish line with high performance parts from Brodix Cylinder Heads. Brodix parts are made from top-quality...
Feed your ride the air and fuel it needs to propel you to the finish line with high performance parts from Brodix Cylinder Heads. Brodix parts are made from top-quality aluminum castings and sport innovative and dependable features that will keep your machine running race after race. We carry an array of low-priced, in-stock Brodix parts, including cylinder heads, valve covers, intake manifolds, gasket sets, valve springs, carburetor adapters, valve stem seals, stud girdles, carburetor spacers, exhaust valves, and more! Plug Brodix Cylinder Heads parts into your car today and feel the power!
Feed your ride the air and fuel it needs to propel you to the finish line with high performance parts from Brodix Cylinder Heads. Brodix parts are made from top-quality aluminum castings and sport innovative and dependable features that will keep your machine running race after race. We carry an array of low-priced, in-stock Brodix parts, including cylinder heads, valve covers, intake manifolds, gasket sets, valve springs, carburetor adapters, valve stem seals, stud girdles, carburetor spacers, exhaust valves, and more! Plug Brodix Cylinder Heads parts into your car today and feel the power!
Brodix Cylinder Heads IK 200 cylinder heads for small block Chevys will give you big-time performance. Made from revolutionary lightweight castings, these virgin aluminum, fully assembled cylinder heads are specifically designed for optimum versatility. Features: * 200cc intake ports * 64cc or 70cc combustion chambers * Manganese bronze valve guides * Valve seats for use with unleaded gas * End-milled and drilled for accessories * 2.02 in./1.60 in. stainless steel valves * Valve springs * Valve stem seals * 5/16 in. guideplates * Rocker arm studs * Retainers * Locks
( 38 )
$605.99
—
$1,493.99
Brodix IK 180 cylinder heads for small block Chevys will give you big-time performance. Made from revolutionary lightweight castings, these virgin aluminum, fully assembled cylinder heads offer the following features: * 180cc intake ports and 64cc or 70cc combustion chambers * Manganese bronze valve guides * Valve seats for use with unleaded gas * End-milled and drilled for accessories * 2.02 in./1.60 in. stainless steel valves * Valve springs * Valve stem seals * 5/16 in. guideplates * Rocker arm studs * Retainers * Locks
( 30 )
$1,207.99
—
$1,493.99
Brodix Race-Rite rectangular port cylinder heads for big block Chevys bolt on directly in place of your stock heads. Because the stock exhaust ports are in the stock location, you don't have to worry about header or manifold interference. Brodix aluminum heads are great for high-horsepower applications.
( 8 )
$885.99
—
$2,821.99
Stabilize your valvetrain with a stud girdle from Brodix Cylinder Heads. These 3-piece aluminum systems are lightweight, durable, and easy to install. They will stabilize your valvetrain and prevent stud deflection. All stud girdle systems include bolts, AN washers, adjusting nuts with snap rings, and internal springs for easy adjustments. These systems are CNC-machined for a precise fit.
( 11 )
$240.99
—
$432.99
Choose quality valve springs from Brodix. Valve springs are one of the most critical and overlooked components in your engine. They must be matched to your cam in order for the engine to reach its full potential. Use the only valve springs that will give the recommended spring pressure with the valve both on the seat and at maximum lift. Brodix Cylinder Heads offers a variety of valve springs to suit your needs.
( 3 )
$15.99
—
$479.99
Brodix cylinder heads single plane intake manifolds can deliver the power you need on the street, at the track, or on the strip. They're a single 4-barrel design that features a tall open plenum for increased flow, plus extended runners for improved flow velocity. This helps to boost power and makes the manifolds perfect for drag and oval track racing. If you're looking for even more power, models are available with bosses designed for nitrous hookup. Order the unit tailored for your application.
( 3 )
$671.99
—
$1,371.99
Are you putting Brodix cylinder heads on your engine? Or, do you just need high-quality valves for a project engine you're building? Order Brodix quality exhaust valves and be done with it. They're available in several configurations to cover a variety of vehicle and engine applications.
( 3 )
$27.50
—
$207.99
Treat your Brodix heads to a set of new valve guides. Their replacement valve guides are made from premium materials, like phosphorous bronze, manganese, soft steel, nickel, and more in a large selection of diameters and lengths. Complete the valve guide work for your cylinder heads with replacements from Brodix.
( 1 )
$9.99
—
$36.99
You know about Brodix heads and the kind of power they can deliver, so why fool around? When it's time to install intake valves—especially if you're going to put them in Brodix cylinder heads—accept no substitutes. These genuine Brodix intake valves are available in a variety of configurations for fitment on specific vehicle and engine applications.
( 1 )
$21.99
—
$210.99
Brodix Cylinder Heads Track I aluminum heads for small block Chevy engines are proof that you can install race-winning aluminum heads without emptying your bank account. Features include: * CNC-machined * Matched high-flow intake and exhaust ports * Gasket-matched intake ports * Blended valve bowls * 3-angle competition valve job * Ductile iron valve seats for use with unleaded gas * Fully assembled * Stainless steel valves * 1.550 in. roller valve springs * 10 degree locks and retainers * Screw-in studs * Guideplates
( 3 )
$694.99
—
$3,858.99
Brodix aluminum valve covers are offered in tall and short styles to clear stud girdles and roller rockers. They feature stout construction with thick, precision-machined gasket surfaces to ensure a good seal. Mounting hardware is included.
( 2 )
$256.99
—
$293.99
Tired of leaky valve covers? Then these Brodix Cylinder Heads cast aluminum valve covers should put a smile on your face. They feature stout construction with thick, precision-machined gasket surfaces to ensure a good seal. The covers have a sandcast finish with a machined and polished Brodix logo. They're available in short or tall models to clear stud girdles and roller rockers.
Not Yet Reviewed
$239.99
—
$319.99
Brodix ST 5.0 cylinder heads for small block Ford feature the latest state-of-the-art technology. They are designed for smaller cubic inch engines (302-351) that would accept a 1.940 in. intake valve. The cylinder heads feature a 60cc combustion chamber, a 171cc intake runner, an angled spark plug location, and a standard intake port location. They use a standard-style exhaust flange that is raised .500 in. taller than stock, and will accept standard header flanges.
Not Yet Reviewed
$1,750.99
Brodix Cylinder Heads Super valve locks are wider-angled 10 degree locks. They distribute the ever-increasing valve spring loads over the retainer better than typical 7 degree locks by reducing the chance of "pull-through" failure. These valve locks are precision-machined for accuracy and are available for many popular valve sizes with or without a lash cap recess. Brodix Super valve locks are designed to fit any 10 degree retainer and are recommended for all race applications due to their superior strength.
( 1 )
$2.99
Brodix Dragon Slayer 26 degree cylinder heads go from innovative design to precision manufacturing for efficient, effective performance to top off your big block build. These aluminum cylinder heads require no porting, making them the most powerful heads in their class, and they are available with 320cc or 365cc intake ports. Brodix Dragon Slayer 26 degree cylinder heads also accept standard pistons, intake manifolds, and rocker arms. Brodix Dragon Slayer 26 degree cylinder heads feature: * DS 320 and DS 365 models are available bare or assembled * 320cc intake port flows over 370 cfm * 365cc intake port flows over 392 cfm
( 2 )
$955.99
—
$1,983.99
Brodix Cylinder Heads intake manifold gaskets are made of a cellulose/nitrile material that is less compressible, for excellent sealing and durability. This material has an anti-stick coating plus a silicone bead around each intake port, except where noted, for a tight, leakproof seal. These gaskets are the choice of champions and the perfect solution for intake-sealing problems associated with the small sealing areas between ports and the different expansion rates of intake manifolds and cylinder heads.
( 18 )
$8.99
—
$28.99
These Brodix Cylinder Heads valve stem seals are designed to keep your valves oiled and working correctly. They feature positive-stop PTFE construction for maximum durability.
( 13 )
$2.99
—
$26.99
These Brodix Cylinder Heads Dragon Slayer 23 degree cylinder heads offer exceptional economical out-of-the-box horsepower. They allow the combustion chamber to flow over 300 cfm @ .600 cam lift. The as-cast other ports are built for excellent flow and the 23 degree valve angle allows for standard rocker arms and other bolt-on components to be used. Features include: * 225cc as-cast intake ports * 64 or 68cc CNC-ported combustion chambers * 2.08 intake/1.60 exhaust valves * End-milled and drilled for accessories
( 4 )
$1,609.99
—
$2,771.99
Brodix Cylinder Heads composite valve cover gaskets are for really serious race engines--Nextel Cup, Pro Stock, Fuel Dragster, Funny Car, and the like. Their steel core provides rigidity and added resistance to being sucked in or blown out, and the special composite material that surrounds the core provides a rugged seal, with good torque retention for the mounting bolts. Brodix composite valve cover gaskets use a special silicone coating to improve sealing and ease removal.
( 2 )
$29.99
Replace your stock rocker arm studs with Brodix Cylinder Heads rocker arm studs. They work well in applications with moderate lifts and spring pressures and are perfect for high performance applications, too.
( 4 )
$4.99
—
$5.99
Brodix Cylinder Heads valve cover gaskets are designed to fit your Brodix valve covers. Made of quality materials, they ensure a good seal between your valve covers and heads.
( 4 )
$6.99
—
$31.99
Brodix Cylinder Heads BB-3 Xtra heads take conventional big block Chevrolet technology a step further. They feature a valve angle that is rolled 2 degrees from the standard location, and newly designed intake and exhaust ports. The BB-3 Xtra heads are available in several configurations. Standard features include: * High-velocity intake ports * New fuel-efficient chambers * Extra-thick deck * High valve cover rail
Not Yet Reviewed
$1,429.99
—
$3,039.99
Brodix BB-2 Xtra cylinder heads flow over 375 cfm with only the bowls blended and the intake ports matched to the gaskets. The intake ports have been contoured and matched for use in today's 540 cu. in. or larger bracket-racing big block Chevy engines. The exhaust ports are raised 0.600 in. higher than stock. These cylinder heads will accept all standard pistons, intake manifolds, and rocker arms, and the valve cover rails are raised to prevent leakage. They're available in both as-cast and CNC-ported versions.
( 8 )
$955.99
—
$2,941.99
Brodix Cylinder Heads offers a variety of exhaust header gaskets specifically matched for your Brodix heads. Prevent leaks in your exhaust headers with Brodix header gaskets.
( 7 )
$11.99
—
$26.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
