Availability
Brodix Cylinder Heads IK 200 cylinder heads for small block Chevys will give you big-time performance. Made from revolutionary lightweight castings, these virgin aluminum, fully assembled cylinder heads are specifically designed for optimum versatility. Features: * 200cc intake ports * 64cc or 70cc combustion chambers * Manganese bronze valve guides * Valve seats for use with unleaded gas * End-milled and drilled for accessories * 2.02 in./1.60 in. stainless steel valves * Valve springs * Valve stem seals * 5/16 in. guideplates * Rocker arm studs * Retainers * Locks
( 38 )
$605.99
—
$1,493.99
Brodix BB-2 Xtra cylinder heads flow over 375 cfm with only the bowls blended and the intake ports matched to the gaskets. The intake ports have been contoured and matched for use in today's 540 cu. in. or larger bracket-racing big block Chevy engines. The exhaust ports are raised 0.600 in. higher than stock. These cylinder heads will accept all standard pistons, intake manifolds, and rocker arms, and the valve cover rails are raised to prevent leakage. They're available in both as-cast and CNC-ported versions.
( 8 )
$955.99
—
$2,941.99
Brodix IK 180 cylinder heads for small block Chevys will give you big-time performance. Made from revolutionary lightweight castings, these virgin aluminum, fully assembled cylinder heads offer the following features: * 180cc intake ports and 64cc or 70cc combustion chambers * Manganese bronze valve guides * Valve seats for use with unleaded gas * End-milled and drilled for accessories * 2.02 in./1.60 in. stainless steel valves * Valve springs * Valve stem seals * 5/16 in. guideplates * Rocker arm studs * Retainers * Locks
( 30 )
$1,217.99
—
$1,493.99
Brodix Cylinder Heads Race-Rite oval port cylinder heads for big block Chevys bolt on directly in place of your stock heads, so you can reuse your intake manifold and pistons. Because the stock exhaust ports are in the stock location, you don't have to worry about header or manifold interference. These aluminum heads are great for street and strip applications. They feature 119cc combustion chambers, air conditioner bracket holes, solid phosphorous bronze guides, high-torque 270cc intake ports, a fully machined valve cover rail, and bulletproof rocker stands.
( 24 )
$884.99
—
$1,713.99
Brodix Race-Rite rectangular port cylinder heads for big block Chevys bolt on directly in place of your stock heads. Because the stock exhaust ports are in the stock location, you don't have to worry about header or manifold interference. Brodix aluminum heads are great for high-horsepower applications.
( 8 )
$885.99
—
$2,821.99
These Brodix Cylinder Heads BB-2 Plus heads work well with a heavy car and a smaller engine. The intake ports flow over 340 cfm with only the bowls blended and the intake ports matched to the gaskets. The combustion chambers are properly shaped for use with either methanol or gasoline, preventing detonation. These cylinder heads accept all standard pistons, intake manifolds, and rocker arms, and the valve cover rails are now raised to prevent oil leakage.
( 9 )
$882.99
—
$2,873.99
Stabilize your valvetrain with a stud girdle from Brodix Cylinder Heads. These 3-piece aluminum systems are lightweight, durable, and easy to install. They will stabilize your valvetrain and prevent stud deflection. All stud girdle systems include bolts, AN washers, adjusting nuts with snap rings, and internal springs for easy adjustments. These systems are CNC-machined for a precise fit.
( 12 )
$236.99
—
$432.99
Choose quality valve springs from Brodix. Valve springs are one of the most critical and overlooked components in your engine. They must be matched to your cam in order for the engine to reach its full potential. Use the only valve springs that will give the recommended spring pressure with the valve both on the seat and at maximum lift. Brodix Cylinder Heads offers a variety of valve springs to suit your needs.
( 3 )
$15.99
—
$479.99
Brodix aluminum valve covers are offered in tall and short styles to clear stud girdles and roller rockers. They feature stout construction with thick, precision-machined gasket surfaces to ensure a good seal. Mounting hardware is included.
( 2 )
$254.99
—
$293.99
Are you putting Brodix cylinder heads on your engine? Or, do you just need high-quality valves for a project engine you're building? Order Brodix quality exhaust valves and be done with it. They're available in several configurations to cover a variety of vehicle and engine applications.
( 3 )
$27.50
—
$207.99
Treat your Brodix heads to a set of new valve guides. Their replacement valve guides are made from premium materials, like phosphorous bronze, manganese, soft steel, nickel, and more in a large selection of diameters and lengths. Complete the valve guide work for your cylinder heads with replacements from Brodix.
( 1 )
$9.99
—
$36.99
Brodix STS BR7 LS compatible cylinder heads are standing at the head of the class! With an innovative design and precision manufacturing, Brodix STS BR7 cylinder heads are 100 percent CNC-ported and flow over 380 cfm. Their quality workmanship steps forward with 71cc combustion chambers, a 12 degree valve angle, and a 2.204/1.614 valve combination. Plus, they accept all standard LS components! Of course, Brodix BR Series heads feature their legendary, easily repairable A-356 virgin aluminum alloy and the strongest deck surface in the business. Choose bare or assembled, but choose Brodix STS BR7 LS compatible cylinder heads.
Not Yet Reviewed
$3,818.99
—
$4,883.99
These Brodix Cylinder Heads Dragon Slayer 23 degree cylinder heads offer exceptional economical out-of-the-box horsepower. They allow the combustion chamber to flow over 300 cfm @ .600 cam lift. The as-cast other ports are built for excellent flow and the 23 degree valve angle allows for standard rocker arms and other bolt-on components to be used. Features include: * 225cc as-cast intake ports * 64 or 68cc CNC-ported combustion chambers * 2.08 intake/1.60 exhaust valves * End-milled and drilled for accessories
( 5 )
$1,372.99
—
$2,771.99
You know about Brodix heads and the kind of power they can deliver, so why fool around? When it's time to install intake valves—especially if you're going to put them in Brodix cylinder heads—accept no substitutes. These genuine Brodix intake valves are available in a variety of configurations for fitment on specific vehicle and engine applications.
( 1 )
$21.99
—
$210.99
Brodix Cylinder Heads Super valve locks are wider-angled 10 degree locks. They distribute the ever-increasing valve spring loads over the retainer better than typical 7 degree locks by reducing the chance of "pull-through" failure. These valve locks are precision-machined for accuracy and are available for many popular valve sizes with or without a lash cap recess. Brodix Super valve locks are designed to fit any 10 degree retainer and are recommended for all race applications due to their superior strength.
( 1 )
$2.99
Brodix Dragon Slayer 26 degree cylinder heads go from innovative design to precision manufacturing for efficient, effective performance to top off your big block build. These aluminum cylinder heads require no porting, making them the most powerful heads in their class, and they are available with 320cc or 365cc intake ports. Brodix Dragon Slayer 26 degree cylinder heads also accept standard pistons, intake manifolds, and rocker arms. Brodix Dragon Slayer 26 degree cylinder heads feature: * DS 320 and DS 365 models are available bare or assembled * 320cc intake port flows over 370 cfm * 365cc intake port flows over 392 cfm
( 2 )
$868.99
—
$1,983.99
Brodix Cylinder Heads titanium valve spring retainers are precision-machined from high-quality titanium and designed to handle high pressures developed by the valve springs. Titanium retainers are both stronger and lighter than steel, which in return gives your engine extra strength and performance.
Not Yet Reviewed
$15.99
—
$16.99
Replace your stock rocker arm studs with Brodix Cylinder Heads rocker arm studs. They work well in applications with moderate lifts and spring pressures and are perfect for high performance applications, too.
( 4 )
$4.99
—
$5.99
Brodix Cylinder Heads Track I aluminum heads for small block Chevy engines are proof that you can install race-winning aluminum heads without emptying your bank account. Features include: * CNC-machined * Matched high-flow intake and exhaust ports * Gasket-matched intake ports * Blended valve bowls * 3-angle competition valve job * Ductile iron valve seats for use with unleaded gas * Fully assembled * Stainless steel valves * 1.550 in. roller valve springs * 10 degree locks and retainers * Screw-in studs * Guideplates
( 3 )
$694.99
—
$3,858.99
Brodix Cylinder Heads BB-3 Xtra heads take conventional big block Chevrolet technology a step further. They feature a valve angle that is rolled 2 degrees from the standard location, and newly designed intake and exhaust ports. The BB-3 Xtra heads are available in several configurations. Standard features include: * High-velocity intake ports * New fuel-efficient chambers * Extra-thick deck * High valve cover rail
Not Yet Reviewed
$1,329.99
—
$3,039.99
Tired of leaky valve covers? Then these Brodix Cylinder Heads cast aluminum valve covers should put a smile on your face. They feature stout construction with thick, precision-machined gasket surfaces to ensure a good seal. The covers have a sandcast finish with a machined and polished Brodix logo. They're available in short or tall models to clear stud girdles and roller rockers.
Not Yet Reviewed
$239.99
—
$299.99
New valve springs with larger diameters require new retainers to handle the higher pressures developed by the springs. Brodix steel valve spring retainers are the solution. Precision-machined from high-quality steel or chromoly and finished in black oxide, Brodix steel valve spring retainers are specifically designed for positive location.
Not Yet Reviewed
$4.99
—
$21.99
Brodix cylinder heads crankshafts are the perfect component to finish off your short block. They feature either forged 4340 or billet steel construction and undergo a multi-step heat treatment process for added strength. The crankshafts are stress-relieved, shot-peened, and magnafluxed—and have micro-polished journals for superior performance. They're available in several different strokes for a variety of engines; be sure to choose the correct part number for your application.
Not Yet Reviewed
$1,193.99
—
$2,049.99
Bolt one of these complete Brodix top-end packages for Chevy onto your short block for the potent tune-up performance you expect--without the wasted time and hassle of assembling all of the various components on your own. The experts at Brodix Cylinder Heads have done the legwork for you, providing quality heads, plugs, gaskets, covers, and hardware in one convenient kit. Brodix top-end packages include: * Fully assembled Brodix cylinder heads * Spark plugs * Head gaskets, intake gaskets, exhaust gaskets, carburetor gaskets, and valve cover gaskets * Valve covers with studs and nuts * Head bolts and washers * Intake bolts and washers * Available with single or dual-plane intake manifolds * Free Brodix hat
( 3 )
$2,333.99
—
$5,185.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
