Availability
Showing In Stock Items. Show All 10 Items.
Bowler Performance lock-up control modules come complete with everything needed to seamlessly control your torque converter lock-up. Converter lock-up will occur 8 to10 seconds after 4th gear engagement, allowing enough engine rpm gain before lock-up, giving your engine more performance and providing a better feel to lock-up. Bowler's lock-up modules only require one 2 amp fused 12 V wire to operate. No vacuum switch is necessary allowing these modules to function correctly with all types of engines, and there are no bulky boxes to hide or mount. The control modules have the GM 4-prong connector integrated onto the control board, and are epoxy coated to stay protected against the elements. Choose the kit designed for your transmission. Kits include: * Lock-up control module * Internal wiring harness with lock-up solenoid and mounting studs * Pressure switch * Pan gasket * New transmission filter * Case pass through connector * Brake light switch—standard that has a normally closed switch (for your lock-up module) and a normally open switch (for your brake lights). The brake switch does not have to be installed for the lock-up module to function, but will allow the driver to tap the brake to un-lock the converter at any time. If you are going up an incline and need a few more rpms to get up that hill, just tap the brake, and the lock-up will turn off and not re-engage for approximately 8 seconds. For those with a high-gear ratio and late down shifts who experience a chug of the motor due to the lock-up converter still being engaged; the switch will eliminate this concern.
( 10 )
$229.99
Bowler Performance All-in-One transmission wiring harnesses for the Tremec T-56 Magnum transmission comes equipped with all the connections pre-wired into one harness for a simple installation and ease of use. The small epoxy sealed controller is mounted to the VSS output using the existing bolt, and once the unit is powered up, you will be able to connect via Bluetooth to your Apple or Android smartphone using Bowler's free app. The app will give you the ability to customize the input and output settings for each feature to ensure proper operation in your vehicle. The perfect finishing touch for any Tremec T-56 Magnum conversion, Bowler's All-in-One harnesses eliminate the need for any additional equipment to operate the reverse lock out or generate the correct speedometer signals coming from your Tremec T-56 Magnum. Previously, you would have needed up to five separate parts to perform all the same functions wrapped one of these harnesses. The more technology we incorporate into our hot rods sometimes requires specific input signals to allow everything to function correctly. With the two speed outputs available in these harnesses, you can independently control the output of each one further eliminating any need for additional equipment and connections. Regarding the reverse lockout, Bowler has incorporated the same speed setting feature as the OEs into the All-in-One harnesses, giving you better control over when the lock out is triggered. Bowler's All-in-One harnesses give you much greater flexibility in the components you are able to use and require less time wiring everything up, providing an easier solution for setting up your Tremec T-56 Magnum transmission. Choose the harness version designed for your specific transmission make. Additional notes: * Harnesses utilize a small, built in, epoxy sealed box that will control each of the three functions with power and grounding for each function through a switched +12 V circuit and a wire connected to the negative battery post or engine block. * Control of the reverse lockout solenoid is based on a user defined speed setting (default is set at locked above 4 mph and unlocked at 0 to 3 mph), eliminating the need for a separate lock-out control box. * For your electronic speedometer, the harness is equipped with two speed sensor outputs; the speed sensor outputs generate a square wave signal that goes from about -5 to roughly +5 V, varying in frequency as the speed changes. * Output will automatically shift and give you 0 to +10 volts for EMC input needing positive only signal. * The two speed sensor outputs are completely independent and can be calibrated separately with any pulse count and ratio you want, and are able to drive any common speedometer, cruise control, or ECM. * Tremec T-56 Magnum reverse lock-out module VSS with dual output, pre-set as GM 40-pulse output on one and 16-pulse output on the other and can be adjusted with your iOS or Android device. * Includes wiring for reverse lights, reverse lock-out, and vehicle speed sensor.
( 4 )
$324.99
Bowler Performance hydraulic clutch master cylinders create the proper pressure for smooth shifting, and they are offered in many different styles. They are available with a plastic or anodized billet aluminum reservoir, plus other components (braided line, fittings, bracket, etc.) depending on kit. Choose the clutch master cylinder designed for your vehicle.
Not Yet Reviewed
$461.50
—
$669.99
Bowler Performance bellhousing dial indicator plates correctly dial indicate and align your bellhousing. These steel plates for the Tremec T-56 6-speed transmissions will also work for both GM and Ford versions. They will eliminate the need to remove the front cover of the transmission for bellhousing alignment.
( 1 )
$99.99
Bowler Performance T-56 Magnum NightStick shifters are available in several offsets for applications requiring a specific shifter placement, no offset for OE replacement of worn out or leaking originals, and the Tremec mid-shift position should you need to move the shift location even further forward. Bowler's T-56 Magnum NightStick (OE) retains the factory Tremec shift stub location and can be used in the forward or rear position. The NightStick offset shifters are shipped with a predetermined shift lever location set. If you should need or want the shifter in a different location, you can easily adjust the settings. The upright for the shift lever is held on with a nut and interference fit similar to that of a ball joint that can be rotated 360 degrees and locked back down in any position. The holes that attach the shift lever are threaded all the way through so you can mount your shift lever from either side. The offset base bracket also has an octagonal pattern machined into the attachment point to allow full 360 degree rotation as well. Simply unbolt and rotate to whichever position is best for your application. All the Bowler T-56 Magnum NightSticks are finished in a sleek midnight black anodize with the unmistakable Bowler "B" logo etched on top. The design combines the ball and socket shift stub found on the Viper Spec 6-speed with a completely new base plate configuration utilizing snap-ring retention to keep constant pressure on the ball socket enclosure, eliminating the ability for fluid to leak up past the shift stub. The composite ball used on the shift stub creates a smooth feel with no rattle. Bowler caps the top with a dust boot to keep out debris. Choose the ideal NightStick shifter for your Tremec.
Not Yet Reviewed
$499.99
Bowler Performance Tilton hydraulic master cylinder kits include the components to produce proper pressure and smooth shifting. Each kit contains a Tilton master cylinder, fittings, braided stainless steel line, billet aluminum or plastic remote reservoir, and hardware to attach to OE/factory clutch pedal or Bowler aftermarket pedal. Choose the clutch master cylinder kit designed for your vehicle.
( 1 )
$669.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
