Availability
BluePrint Engines Pro Series Mopar 426 c.i.d. EFI Deluxe dressed long block crate engines feature Gen III Hemi Apache aluminum cylinder heads—and can generate up to 610 hp and 525 lbs.-ft. of torque. The engines are available with a polished or black anodized accessory drive pulley kit. --- BLOCK: NEW OEM Hellcat engine block 4-bolt main 4.090 in. bore One-piece rear main seal Compression ratio: 10.48:1 --- ROTATING ASSEMBLY: Forged steel crankshaft 4.050 in. stroke 6.125 in. connecting rods Forged pistons Internal balance - front Internal balance - rear --- CYLINDER HEADS: Gen III Hemi Apache aluminum cylinder heads 73cc chamber 2.140 in. intake/ 1.650 in. exhaust valves --- CAM SPECS: Hydraulic roller cam .610 intake/ .611 exhaust lift 231 intake/ 255 exhaust duration at .050 – 113 degrees LSA --- IGNITION TIMING: Controlled by ECU --- ALSO INCLUDES: Holley Terminator engine harness Fuel injection Throttle body Harmonic balancer Fabricated intake Manifold Muscle car style - mid sump swap oil pan Spark plugs and coils Timing cover Valve covers Water pump Installed complete front accessory drive: water pump, alternator, power steering, A/C, all belts and pulleys Holley Terminator ECU controller kit and wiring harness All sensors required for engine to run --- NOTES: Features 2013+ 58X reluctor wheel 2009+ crankshaft spacing 2009+ car timing cover VVT locked out MDS – eliminated ** Engine Accessory Specifications: These BluePrint engines were dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet. -- Fuel Delivery Type: Fuel Injected -- Spark Plug: NGK 97408/ LZTR6AP11EG -- Spark Plug Gap: .043 in. -- Harmonic Balancer: Non-Weighted -- Flex Plate/ Flywheel: Non-Weighted -- Stall Converter: 2500+ -- Intake Manifold: Fabricated Aluminum Gen III HEMI -- Fuel Recommendation: 91 - 93 Octane -- Timing: Controlled by ECU -- Firing Order: 1-8-4-3-6-5-7-2
Not Yet Reviewed
$18,799.00
—
$18,899.00
BluePrint / Holley Sniper EFI fabricated intake manifolds continue to push the aftermarket with low-profile intakes for the popular GM LS engine family. They're good looking, perform well, and offer great value for a performance sheet metal style intake manifold. Each unit is ready to bolt on out of the box, is designed to accept Sniper high-flow throttle bodies, and includes a high-flow fuel rail kit. This updated design was developed to allow the end user to fit under a stock hood. Each manifold is precision fixtured, welded for a perfect fit and maximum structural integrity. Your choice of throttle body opening sizes of 92mm and 102mm are available. Additional details: * Low-profile design (overall 1.875 in. shorter) allows fitment under stock hoods on Corvette, Camaro, Firebird, GTO, and others where hood clearance is at a minimum * Shortened runners allow for compact design. Overall plenum volume maintained by increasing the overall width of the plenum and increasing the overall dimensions of the runner * 3mm (1/8 in.) thick T6061 sheet aluminum construction, strong and durable even under high horsepower and boosted conditions * 100 percent TIG-welded * Intakes include 3/8 in. fuel rail kits with -8 AN fittings and crossover braided line capable of supporting 750+ horsepower (laser-engraved Sniper logo) * Runner lengths with tapered top on EFI intakes designed to increase velocity and more evenly distribute airflow to all 8 cylinders
Not Yet Reviewed
$569.95
BluePrint Engines harmonic balancers are offered for a variety of internally or externally balanced applications; in versions for engines requiring weighted or non-weighted balancers. All are accurately balanced and carefully machined for correct fit. BluePrint dampers feature clear, white, easy-to-read timing marks against a painted black background and include the required bolt and washer for installation.
( 43 )
$145.95
BluePrint Engines SFI-approved flexplates offer unmatched quality, affordability, and safety. With a SFI rating of 29.1, they're designed specifically for high-rpm, high-horsepower applications. Order the model recommended for your year/make and engine application. When quality counts, use BluePrint Engines flexplates.
( 14 )
$149.95
Wrap up your engine build with BluePrint Engines' oil and filters. Their oil filters are available for your SBC/BBC, SBF/Mopar, and LS-style engines. These filters are high-quality, canister styles recommended by BluePrint with premium filter media.
( 12 )
$13.95
BluePrint Engines Pro Billet ready-to-run distributors deliver reliable spark throughout the RPM range, so they'll deliver the performance you need, no matter what you drive—race car, street machine, or hauler. The economical distributors have high-dollar features that outperform the competition, like a lightweight billet aluminum housing that's precision CNC-machined for strength and stability, polished steel shafts with sealed ball bearings for stable operation through 10,000 rpm, and a maintenance-free, high-output magnetic trigger for accurate and reliable performance. The distributors have a black male/HEI cap and vacuum/mechanical advance. An ignition box is not required for use (except in some applications when used with an aftermarket EFI system). The distributors are available with or without mechanical tach drive. Additional details: Computer-controlled compatible: No Trigger style: Magnetic Advance type: Vacuum and mechanical Mechanical tach drive: Some models only Slip collar: No Distributor gear material: Melonized steel Distributor gear rotation: Standard Housing finish: Natural Marine use: No
( 4 )
$229.95
BluePrint Engines offers mechanical fuel pumps for a wide range of applications—including many Ford engine models from the 1960s and up. These performance replacements feature a free flow rate of 80 gph and 3/8 in. inlet/outlet NPT threads. A gasket and mounting hardware are included. Order the pump recommended for your vehicle.
( 8 )
$66.95
BluePrint Engines Pro Series Mopar 426 c.i.d. EFI Deluxe dressed long block crate engines feature Gen III Hemi Apache aluminum cylinder heads—and can generate up to 872 hp and 764 lbs.-ft. of torque. These engines are available with a polished or black anodized accessory drive pulley kit. --- BLOCK: NEW "BGE" Hellcat / Apache engine block 4-bolt main 4.090 in. bore One-piece rear main seal Compression ratio: 10.48:1 --- ROTATING ASSEMBLY: Forged steel crank 4.050 in. stroke 6.125 in. connecting rods Forged pistons Internal balance - front Internal balance - rear --- CYLINDER HEADS: Gen III Hemi Apache aluminum cylinder heads 73cc chamber 2.140 in. intake/ 1.650 in. exhaust valves --- CAM SPECS: Hydraulic roller cam .610 intake/ .611 exhaust lift 231 intake/ 255 exhaust duration at .050 – 113 degrees LSA --- IGNITION TIMING: Controlled by ECU --- ALSO INCLUDES: Whipple 3.0L supercharger Supercharger fluid reservoir Hellcat throttle body Harmonic balancer Muscle car style - mid sump swap oil pan Spark plugs and coils Timing cover Valve covers Water pump Installed complete front accessory drive: water pump, alternator, power steering, A/C, all belts and pulleys Holley Terminator ECU controller kit and wiring harness All sensors required for engine to run --- NOTES: Features 2013+ 58X reluctor wheel 2009+ crankshaft spacing 2009+ car timing cover VVT locked out MDS – eliminated ** Engine Accessory Specifications: These BluePrint engines were dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet. -- Fuel Delivery Type: Whipple 3.0L supercharger -- Spark Plug: NGK 5107 -- Spark Plug Gap: .025 in. -- Harmonic Balancer: Non-Weighted -- Flex Plate/ Flywheel: Non-Weighted -- Stall Converter: 2500+ -- Intake Manifold: Supercharger -- Fuel Recommendation: 91 - 93 Octane -- Timing: Controlled by ECU -- Firing Order: 1-8-4-3-6-5-7-2
Not Yet Reviewed
$26,799.00
BluePrint Engines Pro Series Mopar 426 c.i.d. EFI base long block crate engines feature Gen III Hemi Apache aluminum cylinder heads—and can generate up to 610 hp and 525 lbs.-ft. of torque. --- BLOCK: NEW "BGE" Hellcat / Apache engine block 4-bolt main 4.090 in. bore One-piece rear main seal --- ROTATING ASSEMBLY: Forged steel crankshaft 4.050 in. stroke 6.125 in. connecting rods Forged pistons Internal balance - front Internal balance - rear --- CYLINDER HEADS: Gen III HEMI Apache aluminum cylinder heads 73cc chamber 2.140 in. intake/ 1.650 in. exhaust valves --- CAM SPECS: Hydraulic roller cam .610 intake/ .611 exhaust lift 231 intake/ 255 exhaust duration at .050 – 113 degrees LSA --- IGNITION TIMING: Controlled by ECU --- PS426CTF ALSO INCLUDES: Fuel injection Throttle body Harmonic balancer Fabricated intake manifold Muscle car style - mid sump swap oil pan Spark plugs and coils Timing cover Valve covers Water pump Holley Terminator ECU controller kit and wiring harness All sensors required for engine to run --- NOTES: Compression ratio: 10.48:1 Features 2013+ 58X reluctor wheel 2009+ crankshaft spacing 2009+ car timing cover VVT locked out MDS – eliminated ** Engine Accessory Specifications: These BluePrint engines were dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet. -- Fuel delivery type: Fuel injected -- Spark plug: NGK 97408/ LZTR6AP11EG -- Spark plug gap: .043 in. -- Harmonic balancer: Non-weighted -- Flexplate / Flywheel: Non-weighted -- Stall converter: 2500+ -- Intake manifold: Fabricated aluminum Gen III HEMI -- Fuel recommendation: 91 - 93 Octane -- Timing: Controlled by ECU -- Firing Order: 1-8-4-3-6-5-7-2
Not Yet Reviewed
$16,899.00
BluePrint Engines offers fuel pump block-off plates for a variety of applications—including many Chevy, Ford, and Mopar big block and small block engine models from 1957 and up. These plates are used to cover the hole left by a mechanical fuel pump when an electric or belt-driven fuel pump is installed. This prevents damage to the engine during the first startup. BluePrint steel plates feature a chrome finish, and are machined according to factory specification to ensure proper fitment and performance. They're ideal for use on select Chevy, Chrysler, Dodge, Ford, and Plymouth V8 vehicles.
Not Yet Reviewed
$8.95
BluePrint Engines Pro Billet 2-Wire distributors deliver reliable spark throughout the RPM range, so they'll deliver the performance you need, no matter what you drive—race car, street machine, or hauler. The economical distributors have high-dollar features that outperform the competition, like a lightweight billet aluminum housing that's precision CNC-machined for strength and stability, polished steel shafts with sealed ball bearings for stable operation through 10,000 rpm, and a maintenance-free, high-output magnetic trigger for accurate and reliable performance. The distributors have a black male/HEI cap and mechanical advance. An ignition box is required for use. Additional details: Computer-controlled compatible: No Trigger style: Magnetic Advance type: Mechanical Slip collar: No Distributor gear material: Melonized steel Distributor gear rotation: Standard Housing finish: Natural Marine use: No
Not Yet Reviewed
$219.95
BluePrint Engines offers accessory drive systems for a variety of year/make and engine applications. Unless otherwise noted, the systems contain the various crankshaft pulleys; water pump components; power steering pulleys, brackets, and pump; alternator pulleys, brackets, and parts; and necessary hardware. Order the drive system recommended for your vehicle.
( 1 )
$1,199.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
