Availability
BluePrint Engines dual plane intake manifolds are perfect to top any 302 based engine. Capable of supporting over 400 hp, these cast aluminum replacements are a perfect match for BluePrint HP9008 and HP9009 headed engines, or Windsor iron headed engines. The manifolds are a great addition to performance heads. Bolts and gaskets are included. Additional details (P/N: MLL-BPP302INT): * Engine block style: SBF 302, Stock/OEM standard deck * Cylinder head style: Windsor * Carburetor mounting: 4-barrel square bore * Intake style: Dual plane * Basic operating RPM range: Idle - 6,200 * Intake manifold height: 5.813 in. * Intake finish: Natural * Note: This intake manifold features Windsor intake bolt pattern. This is the production intake manifold used on BluePrint SBF engines 302-347 c.i.d. May not be compatible with OEM chokes or OEM accessory mounting brackets. Does NOT fit 351W based engines, Cleveland, or GT40 applications.
( 5 )
$215.95
BluePrint Engines dual plane Vortec intake manifolds are perfect to top any SBC ranging from 350 to 400 c.i.d. These cast aluminum performance replacements are pressure-tested for leaks—and are capable of supporting over 500 hp. They're a great match for BluePrint H8002K and HP8103 headed engines, or iron Vortec headed engines. Gaskets and hardware are included. Additional details (P/N MLL-BPP350VINT): * Engine block style: SBC Stock/OEM standard deck * Cylinder head style: Vortec * Carburetor mounting: 4-barrel square bore * Intake style: Dual plane * Basic operating RPM range: Idle - 6,200 * Intake manifold height: 4.595 in. * Intake finish: Natural * Intake material: Aluminum * Features two 1/2 in. NPT plugs on top of the front water crossover, and one 3/8 in. NPT plug facing forward, perpendicular to the thermostat. * The rear most 1/2 in. NPT pipe plug on the rear intake runner is for brake booster. This is NOT a water port. * NOTES: This intake manifold features the Vortec (vertical intake bolt) Pattern. This is the production intake manifold used on BluePrint SBC engines 400 c.i.d. and smaller. May not be compatible with OEM chokes or OEM accessory mounting brackets.
( 3 )
$215.95
BluePrint Engines muscle car swap air intake kits are designed to provide proper frequency and location of the mass airflow sensor used with GM controllers. They have been tested on throttle bodies from 80mm to 102mm, and each kit includes filter, tube, MAF receptacle, block-off, clamps, couplers, and hardware. Features and specs: * Red, oil-less cotton gauze washable filter * Total height from base is 7 in. * 4.750 in. black silicon cap * 6 in. inlet * Aluminum intake tube with 97.5mm I.D. * Five stainless steel hose clamps * Tube-to-filter adapter * Three silicon couplers * Silicon clean air hose * Vacuum cap * MAF block-off plate, gasket, and hardware Note: May require modifications based on the wide applications that BluePrint's engines are installed into. Custom installation and modifications, such as drilling a hole for intake air temp on some models.
Not Yet Reviewed
$129.99
BluePrint / Holley Sniper EFI fabricated intake manifolds continue to push the aftermarket with low-profile intakes for the popular GM LS engine family. They're good looking, perform well, and offer great value for a performance sheet metal style intake manifold. Each unit is ready to bolt on out of the box, is designed to accept Sniper high-flow throttle bodies, and includes a high-flow fuel rail kit. This updated design was developed to allow the end user to fit under a stock hood. Each manifold is precision fixtured, welded for a perfect fit and maximum structural integrity. Your choice of throttle body opening sizes of 92mm and 102mm are available. Additional details: * Low-profile design (overall 1.875 in. shorter) allows fitment under stock hoods on Corvette, Camaro, Firebird, GTO, and others where hood clearance is at a minimum * Shortened runners allow for compact design. Overall plenum volume maintained by increasing the overall width of the plenum and increasing the overall dimensions of the runner * 3mm (1/8 in.) thick T6061 sheet aluminum construction, strong and durable even under high horsepower and boosted conditions * 100 percent TIG-welded * Intakes include 3/8 in. fuel rail kits with -8 AN fittings and crossover braided line capable of supporting 750+ horsepower (laser-engraved Sniper logo) * Runner lengths with tapered top on EFI intakes designed to increase velocity and more evenly distribute airflow to all 8 cylinders
Not Yet Reviewed
$449.95
—
$569.95
BluePrint Engines offers mechanical fuel pumps for a wide range of applications—including many Ford engine models from the 1960s and up. These performance replacements feature a free flow rate of 80 gph and 3/8 in. inlet/outlet NPT threads. A gasket and mounting hardware are included. Order the pump recommended for your vehicle.
( 7 )
$64.95
—
$119.95
BluePrint Engines complete EFI fuel pump and plumbing kits are your solution when completing the fuel system on your Sniper, Sniper 2, or any EFI engine such as Hemi or LS. BluePrint expanded on other fuel pump kits by upgrading to stainless braided, PTFE lined, ethanol compatible hose. They also include all the ferrule type PTFE aluminum AN fittings to make your system safe, clean, and look great! You're given all the necessary hose ends, mounting clamps, pump, drop tube, etc. to get the complete job done! AN- O-ring fittings are also included for use if pairing with a BluePrint engines fuel pressure regulator! Features and benefits: * Free flow rate: 80 gph * Maximum pressure: 60 psi * Inlet attachment: Female threads * Inlet size: 10mm x 1.0 * Inlet quantity: One * Outlet attachment: Female threads * Outlet size: 10mm x 1.0 * Outlet quantity: One * Quantity: Sold as a kit * Includes: 40 ft. of 3/8 in. PTFE stainless braided fuel hose * Post pump fuel filter * Necessary hardware and bulkhead fitting to return fuel into the tank * Note: the included insulated mounting clamps are sized to allow both feed and return line to be run side by side and neatly fit into a single clamp * Forced induction horsepower at 60 psi: 530 hp * Naturally aspirated horsepower at 60psi: 690 hp * Similar to Holley 526-7 kit. Perfect for use with Hemi, LS, and Holley sniper systems such as 550-510-3XX and 550-511-3XX
Not Yet Reviewed
$499.95
BluePrint Engines air cleaners not only look great, they also provide your crate engine with cleaner air for optimum performance! These assemblies include the BluePrint chrome embossed top, chrome base, and 3 in. mesh covered paper filter.
( 1 )
$40.95
—
$58.95
BluePrint Engines offers throttle bodies for a wide range of applications, including many Chevrolet, Cadillac, GMC, Hummer, Saab, Dodge, Jeep, and Ram cars and trucks from 2009 and up. The LS compatible throttle bodies feature OEM quality, an 87mm throttle blade, and provide an excellent performance alternative to the pricey factory version. They're a great Gen IV swap candidate for engines using the 2009+ pinout and wiring. Tested by BluePrint on OEM vehicles, and used on LS3 and supercharged LS applications, let your LS breathe with one of these OE grade throttle bodies. Additional details: * 87mm throttle * Multi-port fuel injection * Drive-by-wire * 6-pin electrical connector - Gold Blade * Replaces: 12601387, 12629992, 2173151 * Used in factory GM Supercharged LS configurations * Can also be used to replace snout style TB 12605109, 19420707 as a space saver with tuning * Can be used as an OEM replacement, or as a swap throttle; however a throttle position reset of the OEM ECU is required for proper idle and drivability
Not Yet Reviewed
$104.95
BluePrint Engines electric carburetor fuel pumps are performance replacements, supplying fuel to the injectors at a defined pressure. The injectors spray the fuel into the intake manifold (manifold injection) or direction into the combustion chamber (petrol direct injection). These externally mounted pumps feature 3/8 in. NPT inlet/outlet threads and a 130 gph flow rate.
( 1 )
$109.95
BluePrint Engines billet aluminum fuel pressure regulators are an excellent way to ensure your engine is getting the correct fuel pressure. These quality regulators come right out of the same factory as other premium market offerings at a fraction of the cost. (Don't forget your BluePrint Engines fuel pressure gauge to match!) Features and benefits: * Pressure range: 40-75 psi * Regulator style: Return * Regulator location: Inline * Boost/Vacuum reference port: Yes * Boost/Vacuum rise ratio: 1:1 * Gauge port: Yes * Mounting bracket included * Rebuildable * Inlet quantity: One * Inlet attachment: Female threads * Inlet size: -6 AN O-ring * Outlet attachment: Female threads * Outlet size: -6 AN O-ring * Outlet quantity: One * Return attachment: Female threads * Return fitting size: -6 AN O-ring * Regulator finish: Black anodized
Not Yet Reviewed
$88.95
—
$129.95
BluePrint Engines offers fuel pump pushrods for a variety of applications, including many Chevy small block and big block engines from the 1950s, '60s, '70s, and '80s. These replacements are made from durable chromoly steel and ensure that the pump strokes properly to allow the fuel to flow. The pushrods are machined in accordance with factory specifications to guarantee correct fitment and long-lasting performance.
Not Yet Reviewed
$22.95
BluePrint Engines offers fuel pump block-off plates for a variety of applications—including many Chevy, Ford, and Mopar big block and small block engine models from 1957 and up. These plates are used to cover the hole left by a mechanical fuel pump when an electric or belt-driven fuel pump is installed. This prevents damage to the engine during the first startup. BluePrint steel plates feature a chrome finish, and are machined according to factory specification to ensure proper fitment and performance. They're ideal for use on select Chevy, Chrysler, Dodge, Ford, and Plymouth V8 vehicles.
Not Yet Reviewed
$6.95
—
$8.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
