Availability
BluePrint Engines dual plane intake manifolds are perfect to top any 302 based engine. Capable of supporting over 400 hp, these cast aluminum replacements are a perfect match for BluePrint HP9008 and HP9009 headed engines, or Windsor iron headed engines. The manifolds are a great addition to performance heads. Bolts and gaskets are included. Additional details (P/N: MLL-BPP302INT): * Engine block style: SBF 302, Stock/OEM standard deck * Cylinder head style: Windsor * Carburetor mounting: 4-barrel square bore * Intake style: Dual plane * Basic operating RPM range: Idle - 6,200 * Intake manifold height: 5.813 in. * Intake finish: Natural * Note: This intake manifold features Windsor intake bolt pattern. This is the production intake manifold used on BluePrint SBF engines 302-347 c.i.d. May not be compatible with OEM chokes or OEM accessory mounting brackets. Does NOT fit 351W based engines, Cleveland, or GT40 applications.
( 6 )
$215.95
BluePrint Engines dual plane Vortec intake manifolds are perfect to top any SBC ranging from 350 to 400 c.i.d. These cast aluminum performance replacements are pressure-tested for leaks—and are capable of supporting over 500 hp. They're a great match for BluePrint H8002K and HP8103 headed engines, or iron Vortec headed engines. Gaskets and hardware are included. Additional details (P/N MLL-BPP350VINT): * Engine block style: SBC Stock/OEM standard deck * Cylinder head style: Vortec * Carburetor mounting: 4-barrel square bore * Intake style: Dual plane * Basic operating RPM range: Idle - 6,200 * Intake manifold height: 4.595 in. * Intake finish: Natural * Intake material: Aluminum * Features two 1/2 in. NPT plugs on top of the front water crossover, and one 3/8 in. NPT plug facing forward, perpendicular to the thermostat. * The rear most 1/2 in. NPT pipe plug on the rear intake runner is for brake booster. This is NOT a water port. * NOTES: This intake manifold features the Vortec (vertical intake bolt) Pattern. This is the production intake manifold used on BluePrint SBC engines 400 c.i.d. and smaller. May not be compatible with OEM chokes or OEM accessory mounting brackets.
( 3 )
$215.95
BluePrint Engines muscle car swap air intake kits are designed to provide proper frequency and location of the mass airflow sensor used with GM controllers. They have been tested on throttle bodies from 80mm to 102mm, and each kit includes filter, tube, MAF receptacle, block-off, clamps, couplers, and hardware. Features and specs: * Red, oil-less cotton gauze washable filter * Total height from base is 7 in. * 4.750 in. black silicon cap * 6 in. inlet * Aluminum intake tube with 97.5mm I.D. * Five stainless steel hose clamps * Tube-to-filter adapter * Three silicon couplers * Silicon clean air hose * Vacuum cap * MAF block-off plate, gasket, and hardware Note: May require modifications based on the wide applications that BluePrint's engines are installed into. Custom installation and modifications, such as drilling a hole for intake air temp on some models.
Not Yet Reviewed
$129.99
BluePrint / Holley Sniper EFI fabricated intake manifolds continue to push the aftermarket with low-profile intakes for the popular GM LS engine family. They're good looking, perform well, and offer great value for a performance sheet metal style intake manifold. Each unit is ready to bolt on out of the box, is designed to accept Sniper high-flow throttle bodies, and includes a high-flow fuel rail kit. This updated design was developed to allow the end user to fit under a stock hood. Each manifold is precision fixtured, welded for a perfect fit and maximum structural integrity. Your choice of throttle body opening sizes of 92mm and 102mm are available. Additional details: * Low-profile design (overall 1.875 in. shorter) allows fitment under stock hoods on Corvette, Camaro, Firebird, GTO, and others where hood clearance is at a minimum * Shortened runners allow for compact design. Overall plenum volume maintained by increasing the overall width of the plenum and increasing the overall dimensions of the runner * 3mm (1/8 in.) thick T6061 sheet aluminum construction, strong and durable even under high horsepower and boosted conditions * 100 percent TIG-welded * Intakes include 3/8 in. fuel rail kits with -8 AN fittings and crossover braided line capable of supporting 750+ horsepower (laser-engraved Sniper logo) * Runner lengths with tapered top on EFI intakes designed to increase velocity and more evenly distribute airflow to all 8 cylinders
( 1 )
$449.95
—
$569.95
BluePrint Engines electric carburetor fuel pumps are performance replacements, supplying fuel to the injectors at a defined pressure. The injectors spray the fuel into the intake manifold (manifold injection) or direction into the combustion chamber (petrol direct injection). These externally mounted pumps feature 3/8 in. NPT inlet/outlet threads and a 130 gph flow rate.
( 1 )
$109.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
