Availability
Banks Power AutoMind 2 programmers allow your engine to work smarter by replacing the limited factory programming with one of their sophisticated tunes. You'll realize noticeably more power, performance, and mileage efficiency right away. The computer programmers are custom-engineered and configured to work with your year, make, and model. Add some serious sizzle to your gas pedal with an AutoMind 2 from Banks Power.
( 19 )
$439.00
Banks Power Ford 2011-2015 6.8L V-10 Class A Motorhome PowerPack systems eliminate factory restrictions with free-flowing intake and exhaust components to boost performance, efficiency, and engine life, while adding hefty power—all at a modest cost. They also stretch your driving time between fill-ups! The PowerPack components work in concert to optimize power, torque, mileage, and durability. After years of real-world Research and Development on the open road, the folks at Banks Power know what it takes to efficiently get every extra ounce of horsepower and torque out of your 6.8L Ford V-10 engine in order to get your Class-A Motorhome running at its full potential. With its free-flowing components and mandrel-bent tubing that dramatically reduce back-pressure, your Ford Class-A Motorhome will instantly gain an overall improvement in horsepower, torque, throttle response and fuel economy.
Not Yet Reviewed
$2,769.00
—
$3,269.00
Banks Power universal OBD II splitters allow you to connect two devices to the OBDII port. The plug is a right angle for minimal interference. Notes: * For use with Banks devices and retractable steps * Not intended for use with Banks devices AND third-party OBD monitors * Most ECMs will only communicate with one diagnostic device at a time. Using a splitter will result in the vehicle's ECM having to choose between devices. One of your devices will not operate properly.
Not Yet Reviewed
$30.00
Gale Banks is an innovative engineer in the world of diesel performance, and his company is a leader in the aftermarket industry. Banks Power interconnect cables allow your vehicle to communicate with their various parts to ensure the best outcome. These cables allow Banks tuners and/or SpeedBrakes to connect with the vehicle's OBD-II port in order for the tuner, the vehicle, and the iQ, if so equipped, to communicate with each other. Banks Power interconnect cables are designed to communicate across all of their platforms to obtain maximum performance and bring your vehicle to life.
Not Yet Reviewed
$17.00
—
$38.00
Banks Power Derringer iDash 1.8 tuner systems include the Derringer tuner and iDash 1.8 SuperGauge to not only monitor your vehicle's performance, but define it in a big way! Dyno-calibrated, the Derringer uses multiple data inputs—such as throttle position, RPM, vehicle speed, AFR, knock, and coolant temperature—just like your engine's ECU. Its microprocessor-based electronics are able to actively and safely optimize the calibrations in real time; no other competitive product does that! Derringer iDash 1.8 tuner system features include: * Simple plug-and-play installation (easy removal for dealer service) * Interfaces with OBDII port (On-Board Diagnostics/Information) to communicate directly with the vehicle ECU * ActiveSafety (on select models) protects engine/powertrain * Optimizes horsepower for varied driving conditions * Multiple power levels with on-the-fly level changing (with switch) * Value-priced, and loaded with many more great features
( 8 )
$769.00
Banks Power Derringer iDash 1.8 DataMonster tuner systems are designed to be the smartest and safest way to add hp/torque to your diesel-powered vehicle. The microprocessor-based electronics safely optimize the same data input calibrations as your engine's ECU—and they do so in real time via an inline sensor connection and the OBDII port; no other competitor does that! Derringer tuners are equipped with a special coolant temperature watchdog that will disengage extra power when the engine is too cold/hot. They will also auto-adjust power when bad fuel starts to cause knock. Don't get stuck in "limp home" mode with other tuner systems; run with a Banks Power Derringer iDash 1.8 DataMonster tuner system. Features, items, and specs may include: * DataMonster displays up to eight parameters (per gauge) and can log up to 100 at a time * Performance logs and custom alerts available * Simple plug-and-play installation (easy removal for dealer service) * Works with cruise control engaged * Multiple power levels with on-the-fly level changing (with switch) * ActiveSafety (on select models) protects engine/powertrain * Easily concealable compact housing for the electronics * Warranty friendly—no reflash; no ECU traces * Expandable with other Banks Bus products * Value-priced, and loaded with many more great features
( 1 )
$769.00
—
$889.00
Banks Power offers Derringer Tuners for a variety of late model Jeep and truck applications. When paired with an iDash (not included), you will see torque and horsepower gains across the full operating RPM range, starting right off idle and marching to the shift point in each gear. Derringers are dyno-calibrated to use multiple data inputs—such as throttle position, RPM, vehicle speed, AFR, knock, coolant temperature, and EGT, just like your engine's ECM. They actively and safely optimize calibrations in real-time, thanks to OBD-II connectivity. No competitive tuner does that. Derringer Tuners have six levels, adjustable on-the-fly when using an iDash. Level 6 produces best-in-class performance; Level 3 is designed for work use and has a great mid-range feel. When running Level 3 with a loaded truck and/or pulling a trailer, your on-ramp merging speeds and passing times are greatly improved. The electronics are enclosed in a compact housing which is easily concealed and communicates with other Banks devices, such as the iDash DataMonster, iDash SuperGauge, and PedalMonster throttle booster. Derringer Tuners connect inline with your truck's engine sensors. But unlike other tuners, they also connect to the vehicle's OBD-II diagnostic bus. ActiveSafety health monitoring circuitry keeps an eye on the vehicle and the module itself. It checks its health 100 times a second. If it detects an issue, the Derringer instantly bypasses itself, sets a device diagnostic code, and seamlessly returns the truck to stock power. Plus, Derringer's special coolant temp monitoring prevents power addition when the engine is too cold or overheated. The Derringer also auto-adjusts power if knock occurs due to bad fuel. Maximum safe power is all automatic with a Derringer Tuner—you just choose your preferred power level and enjoy the ride. AutoRate Dynamic Tuning: The Derringer calibration is continuously adjusting to provide peak performance under every driving condition. By utilizing the power of the OBD-II data, the tuner intelligently fine-tunes its calibration on the fly without you having to change its power level. * Exhaust Gas Temperature (EGT): Monitors EGT and intelligently modulates fueling to maintain a safe maximum EGT, protecting your turbo and engine. * Altitude compensation: Senses ambient air pressure, controlling the turbocharger to maintain added boost and power as altitude increases. * Diesel Particulate Filter (DPF) Regen: Monitors your DPF regen status to ensure the process completes successfully. * Accelerator Pedal Monitoring: Rolls in additional power progressively, optimizing for both part-throttle fuel economy and max power when you ask for it. * Full Power Timer: Allows for 30 seconds of wide-open throttle before transitioning to the recommended power level for sustained tow/haul. * Coolant Temperature Monitoring: Maintains safe power based on coolant temp. * During warmup, no power is added below 120 degrees F * Power is ramped in and fully available above 150 degrees F * If the coolant overheats for any reason, the Derringer starts removing its power at 230 degrees F * Additional power is totally removed if you exceed 240 degrees F
Not Yet Reviewed
$452.19
—
$490.00
Banks Power iDash 4-channel analog frequency module kits connect to your iDash, so you can add four sensor inputs per module. They work with a wide variety of Banks plug-and-play sensors, as well as with your custom analog or resistance sensor. Each channel can be configured to any parameter, making these modules extremely flexible. Additional notes: * Combine with other Banks sensor modules to use additional sensors * Daisy chain up to six analog sensor modules per system * Connects in line with Banks Derringer and other sensor modules for easy connectivity
Not Yet Reviewed
$305.00
Clearance
Banks Power extension cables give you an extra 20 ft. of length for mounting the Banks iQ backup camera on the back of your Crew Cab pickup, trailer, or motorhome.
Not Yet Reviewed
$17.55
$4.50
Banks Power AutoMind programmers will help you get the most out of your car, truck, or van. They're ready to go with preloaded power settings for towing, sport, and fuel economy. Plus, the units can change and display many more values that will help you monitor your vehicle or improve performance. These programmers are capable of adjusting speed and rev limiters, cooling fan activation temperatures, shift points and shift firmness, and correcting your speedometer and read/clear trouble codes on most applications. Don't settle for anything less than maximum performance—order the Banks AutoMind programmer recommended for your application.
Not Yet Reviewed
$535.76
Banks Power offers bracket kits to mount their Derringer tuners or sensor modules to a flat surface. Recommended number of brackets: 1-2 modules use 1 bracket, 3-4 modules use 2 brackets, 4-5 modules use 3 brackets, 5+ modules use 4 brackets. Note: These are not used for iDash or 52mm gauges.
Not Yet Reviewed
$20.00
Banks PowerPack systems optimize your Ford 1994-97 7.3L Powerstroke engine for maximum airflow, horsepower, torque, and efficiency in one convenient package. Banks Power manufactures these kits from quality materials to ensure performance and durability. Kits include: * Ottomind computer programmer (PowerPak calibration) * Ram Air filter and service kit * Techni-Cooler intercooler assembly with TwinRam manifold inlet * Powdercoated steel boost tubes * Monster stainless steel 3.5 in. tailpipe * 4.0 in. stainless steel exhaust tip * Transcommand transmission management module * Dynafact pyrometer * Boost gauge assembly
Not Yet Reviewed
$3,549.00
—
$3,849.00
Banks Power iDash 1.8 DataMonster gauges do things other gauges can't! They offer an easy-to-read, user-selectable LCD display with 2 to 8 values, including up to 80 OBDII mode 01 values with over 300 parameters available. View data your dash won't display and get accurate values your OEM dash gauges filter. Log up to 100 parameters at a time, including up to 20 min/max values. You can customize the navigation button, LCD display colors, brightness, and the rate at which they dim at night. Geek out on your vehicle monitoring like no other with data-logging provided by Banks iDash 1.8 DataMonster gauges. Features (vary by application): * Avoid costly repairs by monitoring important sensors * Set custom low and high alerts for any engine parameter * Read and clear trouble codes on the fly * Patented OBDII density (exclusive to Banks) included * Reads a multitude of engine parameters and internal data directly from vehicle's ECU via OBDII * Built-in shift and rpm light * Daisy chain 4 iDash gauges and view up to 32 parameters simultaneously * Adds data logging functionality with included 4GB micro-SD for over a month's worth of continuous data * Fits standard 52mm (2 1/16 in.) gauge mounts
Not Yet Reviewed
$419.00
When nothing less than "more" will satisfy you, go with the Banks Power Big Hoss modules. These Big Hoss modules are calibrate-to-order modules with up to 5 power levels that add up to 120 hp and 233 ft.-lbs. of torque (with recommended airflow improvements). A pyrometer is also recommended.
Not Yet Reviewed
$479.00
Banks Power iDash 5-channel analog frequency module kits connect to your iDash so you can add four sensor inputs and one frequency signal input per module. They work with a wide variety of Banks plug-and-play sensors, as well as with your custom analog or resistance sensor. Each channel can be configured to any parameter, making these modules extremely flexible. Additional notes: * Harness length is 5 ft. per analog sensor branch and frequency channel is 8 in. * Combine with other Banks sensor modules to use additional sensors * Daisy chain up to six thermocouple and six analog sensor modules per system * Connects in line with Banks Derringer and other sensor modules for easy connectivity
Not Yet Reviewed
$363.00
Banks Power offers a variety of computer programmer accessories, including these universal 12 V power terminators. These Banks Bus termination cables for HW Rev 1 iDash and 12 V power harnesses are used to add a 120 ohm CAN termination resistor to the iDash 12 V universal power cable. (4 pin male-female cable). Only one needed per network.
Not Yet Reviewed
$15.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
