Availability
Be creative with Baileigh Industrial tubing dies. Their selection of die sets for their benders allows you endless fabrication possibilities. Round tube, square tube, and pipe tooling dies are available in sizes and center line radiuses (CLR) to fit your bender and your needs. Roll bars, cages, and more will be project options with the right choice of tubing dies from Baileigh. Dozens of sizes and configurations are available.
( 1 )
$1,505.99
Baileigh Industrial EW-28 English wheels are compact, entry-level units built with a welded tube frame, and can smooth compound curves into 18-gauge mild steel. The EW-28 includes all the tooling you'll need--six lower rolls. Key features: * Ample 28 in. throat depth * Comes standard with an 8 in. x 2 in. upper roll * Includes lower anvil rolls with six different radii: 2, 3, 4, 6, 8, and 12 in. * Arrives intact with only minor assembly required (no welding needed) * Fully welded, heavy-walled square tubing frame helps eliminate flex when forming at maximum capacity * Rigid steel stand is built to withstand years of hard use while shaping mild steel and aluminum sheet metal * Tooling rack on the side gives you a handy place to put your rolls
Not Yet Reviewed
$1,807.99
Baileigh Industrial SN-F16-HN manual corner notchers are high-quality cast iron units perfect for any garage or sheet metal shop. The cutting angle is fixed at 90 degrees and can notch up to 6 in. x 6 in. in one manual stroke. For your safety Baileigh Industrial includes a blade guard to save your fingers. The finished notches are extremely clean and have burr-free edges and adjustable guides on the oversized table allow for accurate repeatable notches. The SN-F16-HN sheet metal notchers include a sturdy floor stand, freeing up valuable worktop space, or you can take it off the stand and have a machine that is very compact and can be easily moved from jobsite to jobsite.
Not Yet Reviewed
$1,654.99
Baileigh Industrial HBR-4820 straight hand brakes can bend 4 ft. lengths up to 120 degrees. The manual sheet metal brakes accommodate up to 20 gauge mild steel capacity.
Not Yet Reviewed
$1,701.99
Baileigh Industrial built this manual sheet metal punch to withstand years of use in a garage or fabrication shop. The HP-160 press will make a perfect hole every time—faster and more efficiently than methods like drilling. Product features: * Manually operated with a long lever to multiply your strength * Rugged capacity of up to .137 in. mild steel * Comes standard with 9 sets of punches and dies, ranging from 1/8 in. to 5/8 in. round * 6.25 in. throat depth allows you to punch practically any part of a given piece of material * Includes industrial material stop to make repeatability easier for production runs * Made from heavy-duty 1.5 in. steel plate and weighs an impressive 176 lbs. This sturdy construction adds strength to the metal punch press and ensures accurate results
Not Yet Reviewed
$1,690.99
Make burr-free cuts every time with Baileigh Industrial CS-225M cold saws. They have cast iron bases and flood coolant systems, normally found only on more expensive models, plus many other features to deliver accurate, pristine cuts every time. Affordable and durable, Baileigh CS-225M cold cut saws are perfect benchtop models for the hobbyist or small fabrication shop. Features and specifications: * Accepts a 9 in. blade (included) * Manual operation * Miters up to 45 degrees to the left, 30 degrees to the right * Spins at 50 rpm, optimal for cutting many different kinds of materials * Cuts tubing, pipe, angle iron, solids, and much more. * 1 hp motor runs on 110 V * Self-centering American-style vise keeps the material in the right position with respect to the blade * Vise grips the material on both sides of the blade for extra support * Direct drive gearbox (encased in a fully machined cast iron housing) ensures proper alignment and a long lifetime of use * Stop rod helps with repeatability for small production runs * Heavy-duty cast iron base stabilizes the machine, so that it can deliver accurate cuts for many years * Flood coolant system maintains high cut quality and helps both the saw and its blades last longer * 2.5 in. round tube, 2.25 in. x 2.25 in. square tube, 1.75 in. round solid tube maximum capacity at 90 degrees * 2.125 in. round tube, 2 in. x 2 in. square tube, 1.5 in. round solid tube maximum capacity at 45 degrees
Not Yet Reviewed
$1,986.99
Baileigh Industrial SBR-3020 3-in-1 combination machines are space-saving combos featuring a slip roll on top, a press brake in the middle, and a shear on the bottom. They are a great choice for small shops with low production runs and one-off projects. Features include; * 30 in. working width for manual shear, press brake, and roll * Maximum capacity of 20-gauge mild steel and 16-gauge aluminum for all functions * Slip roll portion has three wire grooves * Forms rolls down to 1.54 in. diameter * Vertical press brake portion bends up to 90 degrees, so you can make perfect corners * Adjust the camber of the tooling to keep pressure in the middle for a consistent bend across the full width * Press brake portion includes a "V" die set with corresponding punch die on top to make a 90-degree bend * Movable fingers on the top beam, ranging from 1 in. to 10 1/8 in., can make many box sizes * On the shear portion, a spring-loaded hold-down helps reduce burr on the cut and prevent waste * Hardened and reversible blades stay sharp for longer * Turn the handles 360 degrees to get one full cycle from the slip roll, press brake, or shear * Large handles with grips on both sides allow two operators to combine their force and make the machine easier to use * Manual back gauge lets you make repeatable parts without difficulty * Thick steel construction, weighing 340 lbs., gives the machine structural strength and maintains accuracy
Not Yet Reviewed
$1,713.99
Racing on a budget means doing repairs on a budget, and Baileigh Industrial can help you out with their RDB-10 rotary draw benders. These simple and precise manual tubing benders will save you time and money from the first time you use them. RDB-10 benders are perfect for bending hydraulic air lines, brake lines, fuel lines, and more. The easy-to-use workhorse machines come standard with 10 different size combinations (five dies in 3X and 5X diameters), and can bend tubing by up to 180 degrees. The heavy pedestal and tooling rack make these rotary draw benders a worthy addition to your garage. Precision, performance, and perfection—at the right price!
Not Yet Reviewed
$1,535.99
Baileigh Industrial BS-128M portable band saws are perfect for the home shop or hobbyist. They can be run as either a standard horizontal pivot style, or as a vertical style by lifting the head 90 degrees and locking it into position. This becomes extremely important when trying to do intricate designs. They feature a hydraulic-controlled descent, 60 degree mitering head, bearing blade guides, and an easily portable working stand. These band saws are no slouch in the capacity department, either. They can cut up to 5 in. diameter round stock, at 90 degrees, and a 6 in. rectangle, plus a number of other profiles and shapes. The saws also allow for the choice of three blade speeds via a step pulley, a feature not seen on other saws in this price range. Additional features: * Manual return * Swivel head miter adjustment * Miter angle: 0 to 45 degrees * .75 hp motor * Blade speed (FPM): 78, 154, 200 * Belt drive * 110 V power
( 4 )
$2,009.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
