Availability
Need to install a tachometer in your late model distributorless vehicle? AutoMeter has the solution. These tach adapters are designed for vehicles with coil pack or coil-over-plug ignition systems where no tachometer output or signal wire is available. They allow most late model distributorless vehicles to have a tachometer and/or shift light installed.
( 27 )
$110.99
If you've ever tried getting your tach to function after an LS swap, you know it's not always a simple procedure. Save time and frustration without making a single cut in your factory wiring—using one of these AutoMeter Plug-and-Play LS tachometer harnesses. They let you quickly and easily install the AutoMeter 9117 tach adapter onto your LS-derived engine. OEM spec connectors and wiring assure a hassle-free installation that takes minutes rather than hours. No splicing, cutting, or risks of voiding your vehicle's warranty! (Harnesses are available with or without the 9117 adapter.)
( 22 )
$103.99
—
$189.99
AutoMeter OBD-II Signal Splitters provide remote mount connections for additional devices. These units are low-profile splitter/pass-throughs, and are ideal for AutoMeter products like AirDrive, DashLink, DashControl and SmartConnect instrumentation. They also provide additional, easy-to-access connection points for other onboard devices requiring access to the OBD-II data stream. Other features of AutoMeter OBD-II Signal Splitters are: * Connects to existing vehicle OBD-II port, providing two remote mount connections * 10 in. straight through leads with strain reliefs between 16-pin male and female connectors compatible with J1962 OBD-II Standards * Please note: device and vehicle compatibility may vary. Signal splitter designed to maintain OBD-II data signal integrity across two remote connection points, but does not correct for data bus termination, traffic conflicts, or compatibility of attached devices.
( 11 )
$41.99
Installing an accurate aftermarket tachometer on diesel applications has been problematic, until now. AutoMeter diesel tach adapters are ideal for all vehicles equipped with an alternator needing an accurate tach signal. A small pick-up probe is strapped to the outside of the vehicle's alternator and inductively leads its rotation, thus requiring no drilling or modifications for installation. They're compatible with all standard-ignition AutoMeter tachometers and are warranty-friendly. With simple one-touch calibration and widespread uses, AutoMeter diesel tach adapters are just what you need. Additional features: * Generates a standard 12 V square wave tach signal for RPM devices * Discreet status light indicates operation
( 3 )
$144.99
AutoMeter CAN Bridge data modules are the ideal solution to streamline adding gauges or an InVision LCD dash to OBDII based engine and vehicle platforms (2008+). The intuitive CAN Bridge simply plugs into the diagnostic port and captures the existing sensor data and outputs up to six signals to drive a tachometer, speedometer, temperature, pressure, fuel level (0-90 ohm only), and volts on your vehicle. Quickly and easily setup your system to output the available parameters of your choice by utilizing the CAN Bridge data module's menu navigation buttons and OLED display. With this advanced CAN Bridge system from AutoMeter, you can now simplify your next instrumentation installation on your ride! Additional features: * Works with most OBD-II applications which is standardized across all OEMs starting in 2008 * Module includes OLED display and five push buttons to effortlessly navigate menus and program system for operation * Plug-and-play from OBDII to traditional round AutoMeter short sweep electric gauges, tachometers, electronic speedometers, and InVision LCD dashes * Six total channels available: tachometer, speedometer, fuel level (0-90 ohm only), temp, pressure, and volts * Simplifies instrumentation wiring and installation; no sensors to hookup, which means less wires to connect * Sensor data must be present on the data stream to function, otherwise a discrete sensor must be used
Not Yet Reviewed
$363.99
AutoMeter fuel bridges are designed with cutting-edge technology to gather and distribute sending unit data regarding fuel levels and related sensor functions. The fuel bridges interface with any AutoMeter fuel level gauge and with any stock or aftermarket sending unit. These electrical switch panels are designed with three push buttons and an LED display that allows for easy setup. They're compact in size at 3 1/8 in. wide x 2 1/2 in. tall x 3/4 in. thick. AutoMeter fuel bridges include a low fuel level warning capability and can also turn on an LED or relay.
( 8 )
$76.99
The new technology in these AutoMeter Level 1 digital Pro Shift controllers makes it possible to do away with traditional plug-in chips, while providing a combination of features only previously available on the larger Shift-Lite and Playback tachometers. These Level 1 controllers feature a single programmable shift point and a digital rpm display and are compatible with 4-12 cylinder engines.
( 3 )
$162.99
These AutoMeter LED lighted gauge dimmers allow you to dim your LED gauges separately from other factory dashboard gauges. These dimmers are compatible with all other LED-lit instruments, and are capable of adjusting up to seven gauges together.
( 13 )
$50.99
If your tachometer is functioning erratically, one cause may be a defective filter. AutoMeter tachometer filters will improve the unpredictable operation by removing interference and correcting weak or spiky pulse signals caused by points or noisy ignitions. Fix your tachometer's signal surges with replacement filters from AutoMeter.
( 8 )
$32.99
AutoMeter gauge wire connectors allow you to construct your own custom gauge harnesses. They're designed for use with AutoMeter short-sweep electrical gauges—and include terminal connectors and the necessary crimp terminals for use on short-sweep electric air-core gauges. Order the plug type that best suits your application.
( 15 )
$19.99
These AutoMeter wideband oxygen sensor kits are designed to acquire additional information that can be used in your AutoMeter DataPro software. They include an 8 ft. cable to complete the installation.
Not Yet Reviewed
$179.99
AutoMeter replacement senders are used with electrical gauges. The sending units are offered for more than a dozen gauge functions, including fuel, oil, water, boost, brake, oxygen, and nitrous data. They're available in different thread sizes, and some include adapter fittings.
( 249 )
$225.99
These AutoMeter Ultimate DL pressure transducer kits have everything you need to send back the right information to your DataPro software. They are available in your choice of 15 or 100 psi, so you can choose what's best for your setup. The kits include an 8 ft. preassembled cable and wiring for a smoother installation.
Not Yet Reviewed
$188.99
Autometer direct-fit switch panels have pre-molded cutouts that allow up to six rocker switches to be installed in your Wrangler JK. These custom-molded overhead pods mount on the interior top center of the windshield frame providing easy access to the switch panel. This convenient mounting location not only saves you legroom but also allows for quick access to your switches while navigating the terrain ahead of you. The overhead switch panels are made from durable ABS molded plastic, and will fit seamlessly, while hiding wires, to maintain an OEM look to the inside of your Jeep.
( 1 )
$111.99
AutoMeter offers InVision gauge wiring harnesses as replacements for damaged ones. They are available for the V1 and V2 digital dashes. Select the harness designed for your InVision digital dash.
Not Yet Reviewed
$176.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
