Availability
ATK High Performance GM 350 Vortec 290 hp Stage 3 long block crate engines are perfect replacements for your worn out SBC. They are designed with matched components for reliable performance with extra "go power", and they require an electric fuel pump. ATK Stage 3 or complete dressed engines are engineered for those wanting to drop the engine into their project and fire it up. They have outfitted the engines as completely as possible to save you time and headaches. Typically ATK GM 350 Vortec 290 hp complete long blocks consist of: * OE block bored to 4.060 in. diameter with 2-bolt mains and a one-piece rear main seal * OE reground crankshaft with a 3.480 in. stroke * OE powder metal 5.7 in. length connecting rods * Hypereutectic 9.4:1 compression ratio pistons * Moly piston rings * Hydraulic roller camshaft (191/194 duration at 50, .414/.428 in. lift, 111 LSA) * Cast iron Vortec cylinder heads with 64cc combustion chambers, 165cc intake runners, and come with 1.94 in./1.5 in. valves. * Stamped steel 1.5 ratio rocker arms * Single roller timing set * 5 qt. oil pan ( will not fit Chevelle with steering behind crossmember, some Corvettes, and 1962-67 Chevy II) * Melling standard volume oil pump * Valve covers * Flexplate * ATK HP dual plane intake manifold * Distributor HEI * Cast iron long water pump * Front Powerbond balancer (internally balanced) * Pioneer externally balanced 168 tooth flexplate * Quick Fuel Brawler 670cfm carburetor * Autolite spark plugs (605) with 8mm wires
( 8 )
$3,625.99
Give your car or truck a little more punch with one of these ATK High Performance GM 350 Vortec 350 hp Stage 2 long block crate engines. These engines are built from the ground up to replace your old, tired mill with a more modern, efficient engine. ATK hand-builds and balances each one these engines to ensure they are great-running, reliable engines that will get you back on the road. Engine specifications: * HP: 350 * TQ: 400 * Block: OE roller block 4-bolt main 1-pc seal 1996-2000 * Bore/Stroke: 4.040 in. x 3.480 in. * Displacement: 350CI * Crankshaft: OE reground external balance rear of crank/internal balance front of the crank * Rods: OE powder metal 5.7 in. * Pistons: Hypereutectic 9.5:1 compression * Rings: Moly * Camshaft: Hyd. Roller * Cam Specs: 220/224 @50 .495in/.502ex 110LSA * Timing Chain: Double roller * Cylinder Heads: Vortec cast iron 67cc 1.94/1.50 *Rocker Arms: Stamped steel 1.5 ratio * Oil Pan: Rear sump 5qt (not for Chevelles with steering behind crossmember, some Corvettes and 62-67 Chevy II's) * Oil Pump: Melling STD volume * Balancer: Internally balanced – PowerBond #PB1046-N * Flexplate: Externally balanced – Pioneer #FRA-159 * Intake Manifold: ATK HP dual plane * Distributor: HEI (Iron Gear) * Water Pump: OE long pump Recommended components: * Carburetor: Quick Fuel 680CFM vacuum secondary's electric choke #HR-680 * Fuel Pump: Holley mechanical 110GPH #12-327-11 * Spark Plugs: Autolite #605 * Spark Plug Wires: 8mm Engine Info: * Oil: Conventional/Non-Synthetic 10W30 * Oil Filter: Wix or K&N * Timing: 34-36 Degrees * Spark Plug Gap: .035 in. * Firing Order: 18436572 * Octane: 91+ * Stall Converter: Stock * Exhaust: 1 5/8 Headers
( 8 )
$3,688.99
Give your car or truck a little more punch with ATK High Performance GM 350 Vortec 350 hp Stage 3 long block crate engines. These engines are built from the ground up to replace your old, tired mill with a more modern, efficient engine. ATK hand-builds and balances each one these engines to ensure that they are great-running, reliable engines that will get you back on the road. Engine Specifications: * HP: 350 * TQ: 400 * Block: OE roller block 4-bolt main 1-pc seal 1996-2000 * Bore/Stroke: 4.040 in. x 3.480 in. * Displacement: 350CI * Crankshaft: OE reground external balance rear of crank/internal balance front of the crank * Rods: OE powder metal 5.7 in. * Pistons: Hypereutectic 9.5:1 compression * Rings: Moly * Camshaft: Hyd. Roller * Cam Specs: 220/224 @50 .495in/.502ex 110LSA * Timing Chain: Double roller * Cylinder Heads: Vortec cast iron 67cc 1.94/1.50 * Rocker Arms: Stamped steel 1.5 ratio * Oil Pan: Rear sump 5qt (not for Chevelles with steering behind crossmember, some Corvettes and 62-67 Chevy II's) * Oil Pump: Melling STD volume * Balancer: Internally balanced – PowerBond #PB1046-N * Flexplate: Externally balanced – Pioneer #FRA-159 * Intake Manifold: ATK HP dual plane * Distributor: HEI (Iron Gear) * Water Pump: OE long pump * Carburetor: Quick Fuel 680CFM vacuum secondary's electric choke #HR-680 * Fuel Pump: Holley mechanical 110GPH #12-327-11 *Spark Plugs: Autolite #605 * Spark Plug Wires: 8mm Engine Info: * Oil: Conventional/Non-Synthetic 10W30 * Oil Filter: Wix or K&N * Timing: 34-36 Degrees * Spark Plug Gap: .035 in. * Firing Order: 18436572 * Octane: 91+ * Stall Converter: Stock * Exhaust: 1 5/8 Headers
( 1 )
$4,624.99
Bring your ride to life with ATK High Performance Ford 302 375 hp Stage 2 long block crate engines. These engines are based on the tried and true Ford 302 and are built to perform. ATK hand-assembles and balances each engine using top-quality parts to help them produce awesome power. Whether you are replacing an older, tired engine or just looking for a little more performance, ATK has you covered. Details and specs: * 375 hp/380 lbs.-ft. * Compression Ratio: 9.5:1 * ATK Aluminum heads * Hydraulic roller cam * Cast steel crankshaft 50oz external balance * Hypereutectic pistons * Seasoned OE roller block 1987-1995 * 4.040 in. bore x 3.000 in. stroke * One-piece rear main seal * Mechanical fuel pump provision * Dual sump oil pan HP08C, Front sump oil pan HP78C * Melling high volume oil pump * Double roller timing set * Left Hand inlet reverse rotation water pump (HP08C) * Right Hand inlet standard rotation water pump (HP78C) * 50oz external balancer * TCI 529610 157 tooth flexplate with 50oz balance * Edelbrock Performer RPM dual plane intake 7121 * Pro Billet distributor with melonite gear Cylinder Heads: * ATK aluminum cylinder heads * 58cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 185cc intake runners * 1.6 aluminum roller rockers Roller Cam specs: * .512 intake/.512 exhaust * 220 intake/224 exhaust duration @ .050 - 112-degree lobe separation Recommended: * 34-36 degrees total timing * 13726548 firing order * Autolite 3923 spark plugs 0.035 gap * 8mm Spark plug wires * 680 cfm carburetor * Mechanical 80 GPH Fuel pump * 2,400-2,800 Stall converter * 91 plus octane fuel
( 2 )
$5,866.99
Bring your old car or truck back to life with ATK High Performance Ford 351W 300 hp Stage 1 long block crate engines. These engines are built by hand by true craftsmen to ensure a strong-running, reliable engine for your daily driver or hot rod. These engines come ready for you to install your choice of finishing touches, so you can get back out on the road. More product features, items, and specifications include: * Seasoned OE-style roller block (1987-95; 300 hp, 377 torque; 4.060 in. bore x 3.500 in. stroke) * OEM E7TE cast iron cylinder heads (1.77 in. intake/1.46 in. exhaust) * OE-style connecting rods and crankshaft (one-piece rear main seal; 28 oz. balance) * Hypereutectic pistons (9.1:1 compression ratio) * Hydraulic roller camshaft Camshaft ---220/224 Intake/Exhaust Duration at 0.050 in. Lift ---0.512 in. /0.512 in. Intake/Exhaust Valve Lift with Factory Rocker Arm Ratio ---112 degrees LSA (Lobe Separation Angle) * Moly-style piston rings * Timing cover * Oil pan (rear sump truck) and oil pump (Melling standard volume) * Stamped steel 1.6 ratio rocker arms
( 5 )
$3,841.99
Bring your ride to life with ATK High Performance Ford 302 375 hp Stage 1 long block crate engines. These engines are based on the tried and true Ford 302 and are built to perform. ATK hand-assembles and balances each engine using top-quality parts to help them produce awesome power. Whether you are replacing an older, tired engine or just looking for a little more performance, ATK has you covered. Details and specs: * 375 hp/380 lbs.-ft. * Compression Ratio: 9.5:1 * ATK Aluminum heads * Hydraulic roller cam * Cast steel crankshaft 50oz external balance * Hypereutectic pistons * Seasoned OE roller block 1987-1995 * 4.040 in. bore x 3.000 in. stroke * One-piece rear main seal * Mechanical fuel pump provision * Dual sump oil pan HP08, Front sump oil pan HP78 * Melling high volume oil pump * Double roller timing set Cylinder Heads: * ATK aluminum cylinder heads * 58cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 185cc intake runners * 1.6 aluminum roller rockers Roller Cam specs: * .512 intake/.512 exhaust * 220 intake/224 exhaust duration @ .050 - 112-degree lobe separation Recommended: * 34-36 degrees total timing * 13726548 firing order * Left Hand inlet reverse rotation water pump (HP08) * Right Hand inlet standard rotation water pump (HP78) * Autolite 3923 spark plugs 0.035 gap * 8mm Spark plug wires * 2,400-2,800 Stall converter * 1,500-6,500 dual plane intake * 80 GPH Fuel pump * 91 plus octane fuel * 680 cfm carburetor
Not Yet Reviewed
$4,765.99
—
$4,790.99
ATK High Performance Chrysler 360 Magnum 350 HP complete long block crate engines incorporate Engine Quests upgraded casting with the following benefits: * Thicker deck for greater strength * Improved design resists cracking * Superior port finish for increased flow * Water flow redesigned for greater thermal conductivity * Hardened exhaust seats * CNC-machined guides and seats Engine specifications: * HP: 350 * TQ: 430 * Block: OE Magnum roller block 1993-2001 * Bore/stroke: 4.040 in. x 3.580 in. * Displacement: 360 cu. in. * Crankshaft: OE cast * Rods: OE 6.123 in. * Pistons: Hypereutectic 9.3:1 compression * Rings: Chromoly * Camshaft: Hydraulic roller * Cam specs: 207/217 at 50 .496/.496 112 LSA * Timing chain: Double roller * Cylinder heads: New upgraded Engine Quest cast iron 62cc/172cc 1.78/1.50 * Rocker arms: Steel 1.6 pedestal rockers * Oil pan: 5 qt. OE front sump * Oil pump: Melling STD volume * Balancer: Externally balanced * Intake manifold: Edelbrock performer RPM air gap dual plane * Distributor: Pro billet RTR (Iron Gear) * Water pump: OE early pump * Carburetor: Quick Fuel 680 cfm vacuum secondary's electric choke * Fuel pump: Holley mechanical 110 gph * Spark plugs: Autolite * Spark plug wires: 8mm
Not Yet Reviewed
$6,898.99
ATK High Performance Chrysler 360 Magnum 350 HP base long block crate engines incorporate Engine Quests upgraded casting with the following benefits: * Thicker deck for greater strength * Improved design resists cracking * Superior port finish for increased flow * Water flow redesigned for greater thermal conductivity * Hardened exhaust seats * CNC-machined guides and seats Engine specifications: * HP: 350 * TQ: 430 * Block: OE Magnum roller block 1993-2001 * Bore/stroke: 4.040 in. x 3.580 in. * Displacement: 360 cu. in. * Crankshaft: OE cast * Rods: OE 6.123 in. * Pistons: Hypereutectic 9.3:1 compression * Rings: Chromoly * Camshaft: Hydraulic roller * Cam specs: 207/217 at 50 .496/.496 112 LSA * Timing chain: Double roller * Cylinder heads: New upgraded Engine Quest cast iron 62cc/172cc 1.78/1.50 * Rocker arms: Steel 1.6 pedestal rockers * Oil pan: 5 qt. OE front sump * Oil pump: Melling STD volume (does not come with an oil pump driveshaft)
Not Yet Reviewed
$4,098.99
Bring your ride to life with ATK High Performance Ford 302 370 hp Stage 3 long block crate engines. These engines are based on the tried and true Ford 302 and are built to perform. ATK hand-assembles and balances each engine using top-quality parts to help them produce awesome power. Whether you are replacing an older, tired engine or just looking for a little more performance, ATK has you covered. Details and specs: * 375 hp/380 lbs.-ft. * Compression Ratio: 9.5:1 * ATK Aluminum heads * Hydraulic roller cam * Cast steel crankshaft 50oz external balance * Hypereutectic pistons * Seasoned OE roller block 1987-1995 * 4.040 in. bore x 3.000 in. stroke * One-piece rear main seal * Mechanical fuel pump provision * Dual sump oil pan HP08C, Front sump oil pan HP78C * Melling high volume oil pump * Double roller timing set * Left Hand inlet reverse rotation water pump (HP08C) * Right Hand inlet standard rotation water pump (HP78C) * 50oz external balancer * TCI 529610 157 tooth flexplate with 50oz balance * Edelbrock Performer RPM dual plane intake 7121 * Pro Billet distributor with melonite gear * Autolite 3923 spark plugs 0.035 gap * 8mm Spark plug wires * Quick Fuel 680 cfm carburetor with vacuum secondary's and electric choke * Mechanical 80 GPH Fuel pump Cylinder Heads: * ATK aluminum cylinder heads * 58cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 185cc intake runners * 1.6 aluminum roller rockers Roller Cam specs: * .512 intake/.512 exhaust * 220 intake/224 exhaust duration @ .050 - 112-degree lobe separation Recommended: * 2,400-2,800 Stall converter * 34-36 degrees total timing * 13726548 firing order * 91 plus octane fuel
Not Yet Reviewed
$6,674.99
ATK specializes in muscle. With the highest quality internal parts and dyno-proven combinations of every engine built, ATK is able to add the most bang for your buck and back it up with an industry leading warranty. This ATK High Performance GM LM7 5.3L 500 hp base long block crate engine is fitted with AFR heads. Engine specifications: * Horsepower: 500 * Torque: 440 * Block: OE LM7/5.3L iron * Bore/stroke: up to 3.903 in. x 3.622 in. * Displacement (cu.in): up to 347c.i.d. * Crankshaft: OE GM 24 tooth reluctor wheel * Rods: OE powder metal * Pistons: Hypereutectic 10.1 compression * Rings: Moly * Camshaft: Hydraulic roller * Cam specs: Custom performance grind * Timing chain: OE single roller * Cylinder heads: -- AFR CNC ported aluminum -- 59cc/200cc -- 2.000 in. intake/1.570 in. exhaust * Rocker arms: OE 1.7 ratio with trunnion upgrade * Oil pump: Melling M295
Not Yet Reviewed
$5,199.99
—
$5,556.99
ATK High Performance GM 350 Vortec 350 hp Stage 3 long block crate engines with EFI are designed for better drivability and trouble-free cold starts with no tuning required, regardless of elevation, driving habits, or part swap! Based around FiTech Self-Learning EFI systems, these engines come complete from throttle body down to the oil pan. The only thing you'll need is to supply is the fuel system--inline, in-tank, or the FiTech Fuel Command Center. They're dyno-tested with your EFI system and ready to go! Engine specifications: * HP: 350 * TQ: 400 * Block: OE roller block 4-bolt main 1-pc. seal 1996-2000 * Bore/Stroke: 4.040 in. x 3.480 in. * Displacement: 350CI * Crankshaft: OE reground external balance rear of crank/internal balance front of the crank * Rods: OE powder metal 5.7 in. * Pistons: Hypereutectic 9.5:1 compression * Rings: Moly * Camshaft: Hyd. Roller * Cam Specs: 220/224 @ 50 .495in/.502ex 110LSA * Timing Chain: Double roller * Cylinder Heads: Vortec cast iron 67cc 1.94/1.50 * Rocker Arms: Stamped steel 1.5 ratio * Oil Pan: Rear sump 5qt (not for Chevelles with steering behind crossmember, some Corvettes and 62-67 Chevy II's) * Oil Pump: Melling STD volume * Balancer: Internally balanced – PowerBond #PB1046-N * Flexplate: Externally balanced – Pioneer #FRA-159 * Intake Manifold: ATK HP dual plane * Distributor: HEI (Iron Gear) * Water Pump: OE long pump * EFI System: Fitech Go Street EFI 400HP (throttle body, wire harness and hand held unit included) * Fuel Pump: Not Provided - must run electric pump or mechanical fuel pump with Fitech fuel command center * Spark Plugs: Autolite #605 * Spark Plug Wires: 8mm Engine info: * Oil: Conventional/Non Synthetic 10W30 * Oil Filter: Wix or K&N * Timing: 34-36 degrees * Spark Plug Gap: .035 in. * Firing Order: 18436572 * Octane: 91+ * Stall Converter: Stock * Exhaust: 1 5/8 headers
( 2 )
$5,198.99
ATK High Performance Ford 302 375 hp Stage 3 long block crate engines with EFI are designed to have great street manners and will work with most stock components. Teamed up with FiTech Self-Learning EFI systems, these ATK engines come complete from throttle body down to the oil pan. The only thing you will need is to supply is the fuel system--in line, in tank, or the FiTech Fuel Command Center. Plus, they are dyno-tested with your EFI system and ready to go! Details and specs: * 375 hp/380 lbs.-ft. * Compression Ratio: 9.5:1 * FiTech Go Street EFI (wire harness and handheld unit included) * ATK Aluminum heads * Hydraulic roller cam * Cast steel crankshaft 50oz external balance * Hypereutectic pistons * Seasoned OE roller block 1987-1995 * 4.040 in. bore x 3.000 in. stroke * One-piece rear main seal * Front sump oil pan * Melling high volume oil pump * Double roller timing set * Right Hand inlet standard rotation water pump * 50oz external balancer * TCI 529610 157 tooth flexplate with 50oz balance * Edelbrock Performer RPM dual plane intake 7121 * Pro Billet distributor with melonite gear (MSD ignition box required for tach signal) * Autolite 3923 spark plugs 0.035 gap * 8mm Spark plug wires Cylinder Heads: * ATK aluminum cylinder heads * 58cc chamber * 2.02 in. intake/1.60 in. exhaust valves * 185cc intake runners * 1.6 aluminum roller rockers Roller Cam specs: * .512 intake/.512 exhaust * 220 intake/224 exhaust duration @ .050 - 112-degree lobe separation Recommended: * 2,400-2,800 Stall converter * 34-36 degrees total timing * 13726548 firing order * 91 plus octane fuel
Not Yet Reviewed
$7,284.99
ATK High Performance Pro Street 632 c.i.d. 800 hp completely dressed crate engines are sure to turn heads! Hand built; they are stuffed with name brand quality components you can trust to ensure performance. Engine specifications: * Block: Dart Big M 10.2 deck, 4-bolt main, 2-piece seal * Bore/stroke: 4.600 in. x 4.750 in. * Displacement: 632 * Crankshaft: Scat 4340 forged internal balance * Rods: Scat 4340 forged H-beam with ARP 8740 bolts * Pistons: Forged 10.3:1 compression * Rings: Moly * Camshaft: Hydraulic roller * Cam specs: 267/277 at 50 .680 intake/.680 exhaust 110LSA * Timing chain: Double roller * Cylinder heads: Dart Pro 1 aluminum 121cc/345cc 2.300/1.880 * Rocker arms: Howards billet aluminum 1.7 roller rockers * Oil pan: Moroso 7 qt. street/strip pan with windage tray * Oil pump: Melling high volume * Balancer: Power Bond SFI 7.950 in. * Intake manifold: Edelbrock Super Victor * Distributor: Pro billet (iron gear) * Carburetor: Quick Fuel 1150 cfm mechanical secondary * Spark plugs: Autolite #3934 * Spark plug wires: 8mm
Not Yet Reviewed
$16,499.99
ATK specializes in muscle. With the highest quality internal parts and dyno-proven combinations of every engine built, ATK is able to add the most bang for your buck and back it up with an industry leading warranty. This ATK High Performance GM LM7 5.3L 500 hp long block crate engine is fitted with AFR heads and FiTech EFI. Engine specifications: * Horsepower: 500 * Torque: 440 * Block: OE LM7/5.3L iron * Bore/stroke: up to 3.903 in. x 3.622 in. * Displacement (cu.in): up to 347c.i.d. * Crankshaft: OE GM 24 tooth reluctor wheel * Rods: OE powder metal * Pistons: Hypereutectic 10.1 compression * Rings: Moly * Camshaft: Hydraulic roller * Cam specs: Custom performance grind * Timing chain: OE single roller * Cylinder heads: -- AFR CNC ported aluminum -- 59cc/200cc -- 2.000 in. intake/1.570 in. exhaust * Rocker arms: OE 1.7 ratio * Oil pump: Melling M295 * EFI System: -- FiTech Ultra port injection LS1 750 hp with transmission control -- Wiring harness and ECM/TCM included * Fuel injectors: FiTech 55 lb. * Spark plugs: Autolite #104 * Spark plug wires: 8mm * Balancer: Stock internally balanced
Not Yet Reviewed
$8,899.99
Pack Vortec power and stroker torque in your ride with ATK High Performance GM 383 Vortec 390 hp Stage 3 long block crate engines. These engines are hand-built and balanced to ensure a strong-running, reliable engine for your daily driver or hot rod. The 460 ft.-lbs. of twist make these extremely versatile mills that are at home in a towing rig, muscle car, or street rod. Get back out on the road with the ground-pounding power that only a stroker can give you. Engine specifications: * HP: 390 * TQ: 460 * Block: OE roller block 4-bolt main 1-pc seal 1996-2000 * Bore/Stroke: 4.040 in. x 3.750 in. * Displacement: 383CI * Crankshaft: Scat nodular iron external balance rear of crank/internal balance front of the crank * Rods: Scat I Beam 5.7 in. rods with ARP 8740 bolts * Pistons: Hypereutectic 9.5:1 compression * Rings: Moly * Camshaft: Hyd. Roller * Cam Specs: 220/224 @50 .495in/.502ex 110LSA * Timing Chain: Double roller * Cylinder Heads: Dart vortec cast iron 67cc/165cc 2.02/1.60 * Rocker Arms: Stamped steel 1.5 ratio * Oil Pan: Rear sump 5qt (not for Chevelles with steering behind crossmember, some Corvettes and 62-67 Chevy II's) * Oil Pump: Melling STD volume * Balancer: Internally balanced – PowerBond #PB1046-N * Flexplate: Externally balanced – Pioneer #FRA-159 (with scat kit) * Intake Manifold: ATK HP dual plane * Distributor: HEI (Iron Gear) * Water Pump: OE long pump * Carburetor: Quick Fuel 680CFM vacuum secondary's electric choke #HR-680 * Fuel Pump: Holley mechanical 110GPH #12-327-11 * Spark Plugs: Autolite #605 * Spark Plug Wires: 8mm Engine info: * Oil: Conventional/Non-Synthetic 10W30 * Oil Filter: Wix or K&N * Timing: 34-36 Degrees * Spark Plug Gap: .035 in. * Firing Order: 18436572 * Octane: 91+ * Stall Converter: Stock * Exhaust: 1 5/8 Headers
Not Yet Reviewed
$5,998.99
ATK High Performance Chevy LQ4 6.7L 500 HP long block crate engines are designed to be used with a Turbo or Supercharger up to 15 psi. ATK engineered these engines to be affordable yet strong enough to handle a good amount of boost! Engine Specifications: * HP: 550 * TQ: 535 * Block: GM 6.0L iron LQ4 with ARP main studs * Bore/Stroke: 4.030 in. x 4.000 in. * Displacement (cu.in): 408 * Crankshaft: Manley 4.000 in. stroke internally balanced 24-tooth reluctor wheel * Rods: Manley 4340 Forged 6.125 in. H-beam with ARP 2000 bolts * Pistons: Forged * Compression ratio: 10.2:1 * Rings: Total Seal CS/AP with steel top ring * Camshaft: Hydraulic roller * Cam specs: 226/230 at 50 .600/.575 113LSA * Cylinder heads: ATK LS3 aluminum 68cc 2.165 in. / 1.590 in. valves * Rocker arms: OE powdered metal 1.7 ratio with trunnion upgrade * Oil pump: Melling 10296 high volume Recommended Components: • Oil: 10W30 • Oil filter: Wix • Fuel system – OE EFI system or aftermarket • Intake – Stock fuel injected or aftermarket • Balancer -- Stock internally balanced • Flex plate/Flywheel -- Stock internally balanced • Timing -- Set to factory specifications via PCM module (tune required) • Spark plug: NGK BR7 • Tuning: Chassis dyno tune required • Firing order -- Stock • Fuel – 91+ Octane • Recommended stall converter -- 2800+ based on application • Headers -- 1 7/8 in.+ depending on application
Not Yet Reviewed
$7,899.99
ATK High Performance GM 383 Stroker 525 hp Stage 1 long block crate engines are power transplants for your high performance projects. ATK Stage 1 or base engines are designed for builders that have their own component parts already, and who are interested in completing out the build themselves. GM base engines typically consist of the following: short block, camshaft, timing set, cylinder heads, valve covers, timing cover, oil pan, oil pump, and pick up tube. Engine specifications: * Horsepower: 525 * Torque: 515 * Block: OE roller block 4-bolt main one-piece seal 1996-2000 * Bore/stroke: 4.040 x 3.750 in. * Displacement: 383 * Crankshaft: Scat 4340 forged external balance rear of crank/internal balance front of the crank * Rods: Scat 4340 forged H-beam with ARP 8740 bolts * Pistons: Forged 10.2:1 compression * Rings: Moly * Camshaft: Hydraulic roller * Cam specs: 246/250 at 50 .603intake/.609exhaust 110LSA * Timing chain: Double roller * Cylinder heads: ATK American-made aluminum 70cc/210cc 2.02/1.60 * Rocker arms: Billet aluminum 1.6 roller rockers * Oil pan: Moroso 7qt. with windage tray * Oil pump: Melling * Flexplate/flywheel: Pioneer external balance 168 tooth (with Scat kit)
Not Yet Reviewed
$7,198.99
ATK high performance GM marine 383 stroker Mercruiser MPI base 380 HP long block crate engines are remanufactured version of the Mercruiser 377CI MPFI engine with a 4.030 in. bore (383ci). It has the upgraded 4340 forged crankshaft and forged pistons along with the Mercruiser camshaft installed. It is to be used with the Mercruiser MPI system, aftermarket EFI or a carburetor conversion. This engine will make 405HP at the crankshaft and 380HP at the prop which is how Mercruiser rated their power ratings. Features: • OE roller block 4 bolt main with 1pc seal • 3.750 in. stroke • Scat 4340 forged external balance rear of crank/internal balance front of the crank • Scat 4340 forged I beam with ARP 8740 bolts • Forged 9.1:1` compression pistons • Hydraulic roller camshaft • Cam Specs: 215/220 @50 .457in/.474ex 112LSA • Single roller timing chain • Dart Vortec cast iron 67cc/165cc 2.02/1.60 • Stamped steel 1.5 rockers • Rear sump 5 qt. oil pan • Melling oil pump • Pioneer external balance 168 tooth (with Scat kit)
Not Yet Reviewed
$6,198.99
ATK High Performance GM 383 Stroker 525 hp Stage 3 long block crate engines are power transplants for your high performance projects. ATK Stage 3 or complete engines are designed for those that want to drop the engines into their projects and fire them up. ATK tries to outfit the engines as completely as possible to save you time and headaches. GM complete dress engines typically consist of the Stage 2 build plus carburetion, spark plug wires, and spark plugs. Engine specifications: * Horsepower: 525 * Torque: 515 * Block: OE roller block 4-bolt main one-piece seal 1996-2000 * Bore/stroke: 4.040 x 3.750 in. * Displacement: 383 * Crankshaft: Scat 4340 forged external balance rear of crank/internal balance front of the crank * Rods: Scat 4340 forged H-beam with ARP 8740 bolts * Pistons: Forged 10.2:1 compression * Rings: Moly * Camshaft: Hydraulic roller * Cam specs: 246/250 at 50 .603intake/.609exhaust 110LSA * Timing chain: Double roller * Cylinder heads: ATK American-made aluminum 70cc/210cc 2.02/1.60 * Rocker arms: Billet aluminum 1.6 roller rockers * Oil pan: Moroso 7qt. with windage tray * Oil pump: Melling * Flexplate/flywheel: Pioneer external balance 168 tooth (with Scat kit) * Balancer: PowerBond SFI internal balance 8 in. * Intake manifold: Holley strip dominator single plane * Distributor: Pro billet (iron gear) * Water pump: Weiand action plus long pump * Carburetor: Quick Fuel 750 cfm mechanical secondary no choke * Fuel pump: Holley mechanical 110 gph * Spark plugs: Autolite * Spark plug wires: 8mm
Not Yet Reviewed
$8,698.99
ATK High Performance GM 383 Stroker 525 hp Stage 2 long block crate engines are power transplants for your high performance projects. ATK Stage 2 or mid-dress engines are designed for builders that have their own component parts already, and who also are interested in completing the finishing touches of the build themselves. GM mid-dress engines typically consist of the Stage 1 build plus intake manifold, distributor, water pump, front damper, and flexplate. Engine specifications: * Horsepower: 525 * Torque: 515 * Block: OE roller block 4-bolt main one-piece seal 1996-2000 * Bore/stroke: 4.040 x 3.750 in. * Displacement: 383 * Crankshaft: Scat 4340 forged external balance rear of crank/internal balance front of the crank * Rods: Scat 4340 forged H-beam with ARP 8740 bolts * Pistons: Forged 10.2:1 compression * Rings: Moly * Camshaft: Hydraulic roller * Cam specs: 246/250 at 50 .603intake/.609exhaust 110LSA * Timing chain: Double roller * Cylinder heads: ATK American-made aluminum 70cc/210cc 2.02/1.60 * Rocker arms: Billet aluminum 1.6 roller rockers * Oil pan: Moroso 7qt. with windage tray * Oil pump: Melling * Flexplate/flywheel: Pioneer external balance 168 tooth (with Scat kit) * Balancer: PowerBond SFI internal balance 8 in. * Intake manifold: Holley strip dominator single plane * Distributor: Pro billet (iron gear) * Water pump: Weiand action plus long pump
Not Yet Reviewed
$7,698.99
ATK High Performance Ford 502 545 HP Stage 3 EFI long block crate engines are based on dyno-proven combinations built with name brand parts. Here are product details: Engine Specifications: * HP: 545 * TQ: 595 * Block: Seasoned OE block 1987-92 * Bore/Stroke: 4.400 x 4.150 * Displacement: 502 * Crankshaft: Scat nodular iron internal balance * Rods: Scat 4340 forged I-beam with ARP 8740 bolts * Pistons: Hypereutectic 9.5.1 compression * Rings: Moly * Camshaft: Hydraulic flat tappet * Cam specs: 253/253 at 50 .585in/.585ex 110LSA * Timing chain: Double roller * Cylinder heads: Edelbrock performer RPM aluminum 75cc/292cc 2.190/1.760 * Rocker arms: Stainless steel 1.73 ratio * Oil pan: Front sump * Oil pump: Melling high volume * Balancer: PowerBond internal balance PB1210-N * Flexplate/Flywheel: Pioneer internal balance FRA-207 * Intake manifold: Edelbrock performer RPM dual plane 7166 * Distributor: Pro billet RTR (Iron Gear) * Water pump: OE cast iron * Carburetor: Quick Fuel 780 cfm vacuum secondary's electric choke HR-780 * Fuel pump: Holley mechanical 110 gph 12-460-11 * Spark plugs: AutoLite 3923 * Spark plug wires: 8mm Additional engine Info: * Oil: Conventional / Non-Synthetic 10W30 with Comp Cam zinc additive 159 for first 3,000 miles * Oil filter: Wix or K&N per application * Timing: 34-36 degrees * Spark plug gap: .035 in. * Firing order: 15426378 * Octane: 91+ * Stall converter: 2200-2500 * Exhaust: 1 3/4 – 2 in. headers
Not Yet Reviewed
$11,132.99
ATK High Performance GM LM7/LS1 515 hp+ Stage 1 long block crate engines offer streetable horsepower producing big mid- to upper-end power with a noticeable idle. ATK Stage 1 or base engines are designed for those of you that may have component parts already and want to complete the build yourself. Typically, ATK GM LM7/LS1 515 hp+ base engines consist of: * LM7 5.3L Gen III iron block * K1 4340 forged crankshaft * Forged I-beam connecting rods * Forged pistons * Piston rings * Hydraulic roller camshaft * CNC-ported cathedral port cylinder heads * OE rocker arms with trunnion upgrade * Oil galley plugs are installed and sealed All LS long blocks will include: * LS2 lifter trays * LS7 high-rev lifters * Melling high-pressure oil pump * SA Gear billet timing chain with 9 keyway adjustment
Not Yet Reviewed
$7,898.99
ATK High Performance GM LM7/LS1 347CI Stage 1 engine 500 hp long block crate engines offer streetable horsepower—producing big mid- to upper-end power with a noticeable idle. The ATK LM7/LS1 engines are designed for individuals that may have their own component parts already, and who may also have an interest in completing out the engine build themselves. Typically ATK GM LM7/LS1 347CI 500 hp base engines consist of: * LM7 5.3L Gen 3 block * OE GM reground crankshaft * Forged I-beam connecting rods * Forged pistons * Piston rings * Hydraulic roller camshaft * CNC-ported cathedral port cylinder heads * OE rocker arms with trunnion upgrade * Oil galley plugs installed and sealed All LS long blocks will include: * LS2 lifter trays * LS7 high-rev lifters * Melling high-pressure oil pump * SA Gear billet timing chain with 9 keyway adjustment
Not Yet Reviewed
$7,498.99
ATK specializes in muscle. With the highest quality internal parts and dyno-proven combinations of every engine built, ATK is able to add the most bang for your buck and back it up with an industry leading warranty. This ATK High Performance GM LQ4 6.0L 535 hp base long block crate engine is fitted with LS3 heads. Engine specifications: * Horsepower: 535 * Torque: 485 * Block: OE LQ4/LQ9 6.0L iron * Bore/stroke: up to 4.030 in. x 3.622 in. * Displacement (cu.in): up to 371c.i.d. * Crankshaft: OE GM 24 tooth reluctor wheel * Rods: OE powder metal * Pistons: Hypereutectic 10.1 compression * Rings: Moly * Camshaft: Hydraulic roller * Cam specs: Custom performance grind * Timing chain: OE single roller * Cylinder heads: -- ATK LS3 rectangular port aluminum -- 69cc/255cc -- 2.160 in. intake/1.600 in. exhaust * Rocker arms: OE 1.7 ratio with trunnion upgrade * Oil pump: Melling M295
Not Yet Reviewed
$5,199.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
