Availability
Finding the proper fasteners in your local hardware store can be a challenge—especially for automotive purposes. Instead, simply order Artec Industries high steer stud kits, the OE-style replacements needed for your Dana axle. Most of these steel studs have a black oxide finish, fine threads on both ends, and offer tensile strength up to 220,000 psi. (Some kits also include nuts and/or conical washers.) Remember, stock bolts are typically too short for high steer applications. Artec studs are sold individually or in multi-pack sets.
Not Yet Reviewed
$21.00
—
$108.00
Artec Industries offers Ultimate 60 high steering arm fasteners for a variety of Dana 60 axle applications. These knuckle bolt kits work well with Artec's Ultimate 60 high steer arms to increase overall knuckle and steering strength—as well as provide options for mounting your steering. Whether you just need to reinforce your knuckles, or want to run your tie rods in double shear, these kits are designed to fit multiple steering configurations. Two kits are required for a pair of high steer arms, and cutting the sleeves in half is necessary to run Heim joints in double shear. Tie rod end holes on the knuckle need to be drilled to 3/4 in. diameter. Order the model that's best suited for your application. Features include: * 3/4 in.-16, 10 in. long, Grade 8 bolt * 3/4 in.-16 all-steel mechanical locknut, the best type of locking nut for steering applications * Machined 1.25 in. O.D., 0.250 in. wall DOM sleeve * Sleeve ends machined for 3/4 in. Heim joints in double shear * Choose your tie rod mounting height * Available for OEM Ford, OEM Chevy, OEM Dodge, and all aftermarket knuckles Important safety notes: * Requires basic steel cutting tools for installation; use caution when cutting steel * Only experienced fabricators should attempt these modifications * All-steel mechanical locking nuts are designed NOT to be reused to ensure the nut does not loosen over time; always use a new nut if you remove it
Not Yet Reviewed
$58.29
Whether you're just starting out with crossover steering or going full hydro, these Artec Industries Ultimate 60 high steer arms are meant to handle it all—and provide you options as well! Rather than use the factory kingpin springs, the knuckle is held together with a springless design that uses a set screw to adjust the torque required to hold together. This eliminates some of the slop commonly found in axles after moderate off-road abuse. The hardware for a springless conversion is included, and consists of a 3/4 in. set screw, jam nut, grease zerk, 1/4 in. thick load washer, and upper kingpin bushing for each arm. The Artec Industries Ultimate 60 high steer arms are machined blank to allow custom tie rod and draglink locations. The knuckle bolt hole is not machined into the high steer arm because the factory hole location in every knuckle is different; thus, to fit your knuckle perfectly, the holes need to be drilled according to the knuckles they will attach to. Artec high steer arms are CNC-machined from 1 1/4 in. thick 1018 cold roll steel and then zinc plated for corrosion protection.
Not Yet Reviewed
$472.99
Artec Industries Ford Super Duty high steer arms are designed for use with the aftermarket Reid Racing Super Duty knuckles. They enable you to correct OEM steering geometry, allowing the drag link to mount above or beneath the arm, depending on lift height steering problems. These arms are CNC-machined from 1 in. thick cold roll steel and clear zinc plated for corrosion resistance. Order the model recommended for your application.
Not Yet Reviewed
$296.99
Upgrade your factory steering with heavy-duty Artec Industries JK aluminum steering kits. These 1-ton steering kits feature 7075 aluminum bars for the ultimate in strength and durability. Features: * 1.5 in. thick solid 7075 T-6 aerospace aluminum links * Machined wrench flats for easy tightening and a smooth look * Able to be flipped to above knuckle or under * Compatible with Right Hand Driver (RHD) vehicles * Heat-treated chromoly offset rod ends to clear differential cover and other vehicle components * Uses massive 3/4 in. Grade 8 bolts for fastening to knuckles * 3/4 in. stover locking nuts for worry and maintenance free fastening * 7/8 in. x 3/4 in. bore high-misalignment spacers * RH and LH 7/8 in. x 14 TPI jam nuts * JMX 7/8 in. x 7/8 in. bore rod end for drag link at the pitman arm * Offset JMX PRO 7/8 in. x 7/8 in. bore rod end for tie rod and drag link at the knuckle
Not Yet Reviewed
$725.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
