Availability
You can now custom build your project like you want using Artec Industries steel D.O.M. tubing. This convenient steel tubing is Drawn Over Mandrel and has tighter wall thickness tolerances. D.O.M. tubing is available in precut lengths. Choose the diameter and thickness you need to start your build.
( 8 )
$109.99
—
$149.99
Artec Industries universal link bushings are the perfect multi-functional product for your fabrication needs. Whether you are using these link bushings for suspension joints, motor mounts, or any number of other uses, the Artec Industries universal link bushings are built with strength in mind.
( 1 )
$26.49
Mount your lower control arms using heavy-duty replacement brackets from Artec Industries. They're made from 1/4 in. in. thick steel plate for strength and have grease fitting access on top to allow easy maintenance of your joint. The brackets have a 2.625 in. mounting width with 9/16 in. bolt hole for common sized style cartridge joints. The skid plate on the bottom of each bracket wraps around the joint, protecting it from direct impact and decreasing premature wear; this skid plate design does not restrict movement of the joint. Tapered sides allow the Artec lower control arm brackets to be mounted at an angle on the frame without excess material hanging off the side. Choose the style needed to mount front or rear control arms on your specific vehicle.
( 13 )
$76.99
—
$168.29
Artec Industries inner C gussets are designed to take serious abuse while reinforcing your front inner C's. They're precision-machined from 1/4 in. thick steel and pre-formed to fit. The heavy-duty design of these gussets provides valuable stability to areas prone to flex during high abuse conditions. Order the brackets recommended for your specific application.
( 6 )
$93.49
—
$102.29
Artec Industries upper truss link mounts are designed to mount on a flat surface. They're precision CNC-cut and bent from 1/4 in. thick mild steel. The bend strengthens each bracket so that no additional reinforcement is needed. Artec upper truss link mounts are available in different widths to accommodate the most common joints. Hole size comes standard at 9/16 in., but can be drilled out to up 1 in., if necessary.
( 1 )
$46.99
Artec Industries adjustable panhard mounts allow for different levels of drop to fine-tune your suspension. These steel mounts are for use with any 3 or 4-link suspensions and may require trimming to fit. Most will need to be welded securely into place. For a well-aligned suspension, use Artec Industries adjustable panhard mounts.
( 4 )
$43.99
—
$69.99
Mount your lower link arm to the frame using these strong replacement brackets from Artec Industries. They're made from 1/4 in. in. thick steel plate for durability and include grease fitting access on top to allow easy maintenance of your joint. The brackets have a 2.625 in. mounting width with 9/16 in. bolt hole for common sized style cartridge joints. The skid plate on the bottom of each bracket wraps around the joint, protecting it from direct impact and decreasing premature wear; this skid plate design does not restrict movement of the joint. Tapered sides allow the Artec lower link frame brackets to be mounted at an angle without excess material hanging off the side. Not only do these brackets look better and more natural to the frame, but they also ensure less bracket sliding on the rocks and getting in the way.
( 4 )
$49.99
Artec Industries' new JK heavy-duty crossmembers are designed to give your Jeep Wrangler JK better protection beneath the vehicle than the stock unit. Designed using CAD files directly from the manufacturer, these heavy-duty reinforcements ensure that you have a great fit with factory components. Made from CNC-cut and formed 1/4 in. thick steel, the JK heavy-duty crossmembers will hold up to plenty of off-road abuse. They enable you to mount longer arms for greater stability and flex. All nuts are pressed into the brackets for easy removal and installation; the crossmembers use 2.625 in. wide joints or bushings with 9/16 in. holes; they're shipped bare so you can custom finish it however you want. Order the model recommended for your Jeep application.
Not Yet Reviewed
$516.99
—
$571.99
Make your axles more robust; swap a 1-ton front or rear axle into your Jeep with Artec Industries axle swap kits. They provide a heavy-duty truss and bracket system designed to take serious abuse and reinforce your entire axles. The components are precision CNC-cut and bent, all the necessary brackets are included, and the overall low-profile design means your axles are stronger, sleeker, easier to install, and less likely to interfere with vehicle components.
Not Yet Reviewed
$604.99
—
$637.99
Artec Industries large 4-link crossmember brackets allow for triangulated lower links that meet at a 1.75 in. O.D. round tube or 2.00 in. square tube crossmember between frame rails (depending on model). They're made for use with large joints that have a 2.625 in. mounting width. The hole size is 9/16 in., but can be drilled for larger sizes. Angles are set at 22 degrees each (44 degrees total) to allow use with Artec's angled lower link axle brackets. These large 4-link crossmember brackets are made from 1/4 in. thick steel and come in six unwelded pieces that jig together for easy assembly.
( 1 )
$114.99
Get your rod ends attached to the chassis the right way. These Artec Industries chassis tube adapters feature full-length threading for a positive thread engagement—and wrench flats keep a smooth appearance while providing simple adjustments. Their beveled edge makes them easier to weld with no grinding, and the outer diameter matches the thick wall tubing for an ultra-sleek look.
Not Yet Reviewed
$25.29
Artec Industries adjustable link tower brackets are designed for use with large joints that have a 2.625 in. mounting width. The holes are set at 7, 8, and 9 in. from the axle centerline to allow you to fine-tune your suspension. They're manufactured from 1/4 in. thick steel and come in four unwelded pieces that jig together for easy assembly. These Artec brackets are especially useful if your tire size changes and the suspension needs to be adjusted. Rather than cutting off the old brackets and installing a taller one, you can simply move your link to the next higher mounting hole!
Not Yet Reviewed
$89.99
Make secure automotive mounts using these convenient Artec Industries general purpose tabs. They're precision-cut from 1/4 in. thick steel and feature a bolt hole for secure attachment and a variety of uses. The welding tabs are available in different heights, shapes, and hole sizes to accommodate your specific project.
Not Yet Reviewed
$13.74
—
$19.24
Mount up your links using a set of Artec Industries adjustable dual 4-link brackets. They're made from 1/4 in. thick steel plate and come unwelded. These chassis brackets feature a height-adjustable top plate, 25 degree angle on the upper holes, 10 degree angled out lower holes, adjustable-width lower holes, and a skid plate to protect the joint location. Artec adjustable dual 4-link brackets use an L-shaped inner tap for higher strength, and are cut out for pass-through plumbing and electrical connections.
Not Yet Reviewed
$249.99
Mount your lower link arm to the axle using these strong replacement brackets from Artec Industries. They're made from 1/4 in. in. thick steel plate for durability and have grease fitting access on top to allow easy maintenance of your joint. The brackets have a 2.625 in. mounting width with 9/16 in. bolt hole for common sized style cartridge joints. The skid plate on the bottom of each bracket wraps around the joint, protecting it from direct impact and decreasing premature wear; this skid plate design does not restrict movement of the joint. Tapered sides allow the Artec lower link axle brackets to be mounted at an angle on the frame without excess material hanging off the side. Choose the degree of offset needed for best fitment on your specific vehicle.
( 1 )
$59.99
—
$64.99
Artec Industries JK/JL/JT 1-ton APEX front Super Duty swap kits are stronger in design, lighter in weight, and easier to install. The patent-pending APEX trusses take these features to a whole new level along with precision fitment, and complete axle protection. Available with three different styles of upper control arm brackets, the kits contain upper and lower control arm mounts, shock mounts, anti-sway bar mounts, track bar mount, bump stop pads, and coil spring mounts. Features: * CNC precision laser-cut in-house from 1/4 in. and 3/16 in. mild steel * CNC precision bent in-house for a great fitment--literally drop the truss in place on the axle and it's ready to weld * Designed used 3D models directly from Ford and Jeep for not only an amazing fit but clearances with surrounding components * 70 percent less welding needed than previous truss designs mean less warping, faster turnaround, and lower costs * All long seams are bent so you don't need to spend time welding them together * Dimpled holes provide not only weight reduction but rigidity and strength * Contours both the cast steel differential and can be welded with normal MIG welder and moderate pre-heating and post-heating * OEM location upper control arms mount to an ultra-high clearance differential bridge that hugs the shape of the casting (bushing or Johnny Joint option) * Truss extends under coil buckets all the way to inner C for end-to-end rigidity * Multi-piece truss design means smaller packaging with easy installation * Using a 1-ton axle will support larger tires and less chance of breakage in extreme conditions * Coil brackets and bump stop pads are combined to form an axle tube truss and allows for easy installment of other brackets * Heavy-duty track bar bracket can slide to multiple positions for steering geometry fine tuning * Shock brackets have been moved up and out (compared to JK OEM position) for a slightly higher clearance lower control arm bracket
Not Yet Reviewed
$571.52
Artec Industries JK 1-ton APEX rear 14-bolt truss swap kits feature patent-pending trusses that go to a whole new level of strength, weight savings, simplicity of installation, precision fitment, and complete axle protection. Artec Industries JK 1-ton APEX rear 14-bolt truss swap kits are advanced truss and bracket systems which can be used for AAM 14-bolt 10.5 in. ring gear. The kits provide the factory link, track bar, spring, anti-sway bar, bump stop pads, and shock locations all encompassed in an axle tube reinforcing truss system. Features: * CNC precision laser-cut in-house from 1/4 in. and 3/16 in. mild steel * Lightweight yet strong ... only 42 lbs. total * CNC precision bent in-house for a great fitment--literally drop the truss in place on the axle and it's ready to weld * Designed used 3D models directly from Ford and Jeep for not only an amazing fit but clearances with surrounding components * 70 percent less welding needed than previous truss designs means less warping, faster turnaround, and lower costs * All long seams are bent so you don't need to spend time welding them together * Dimpled holes provide not only weight reduction but rigidity and strength * Contours both the cast steel differential and can be welded with normal MIG welder and moderate pre-heating and post-heating * 2-piece truss design means smaller packaging with easy installation * Using a 1 ton axle will support larger tires and less chance of breakage in extreme conditions * Coil brackets and bump stop pads are combined to form an axle tube truss and allows for easy installment of other brackets * Save hours of installation time with the built-in axle tube truss which is quicker to weld than individual brackets * Track bar mount includes four locations for those who have aftermarket lifts. Stock height hole is not included though * Coil spring locator is machined from solid steel making welding to bracket quicker than previous tube and cap-style locators * Shock brackets have been moved up for a slightly higher clearance lower control arm bracket * Easily upgradeable for future link geometry changes. Just trim off factory location upper control mounts and weld on a center link mount
Not Yet Reviewed
$604.99
Artec Industries' modular truss ends are designed to complement their modular and short trusses—enabling them to "grow up" and be full-width trusses. Simply trim the end of this product to match the contours of ANY short-style truss, and you have a full-width truss at hand. The design is borrowed from Artec's new low-profile front trusses, and gives you a more compact truss that doesn't get in the way of other vehicle components. The 3/8 in. thick truss top and 1/4 in thick gussets incorporate a unique design to strengthen the axle and provide a link mounting surface or bump stop pad. Use a long modular truss end with a 14-bolt truss and make a 14-bolt front axle. Or use two modular truss ends on a rear axle with a modular or short truss, and you'll have a low-profile rear truss which has more clearance for frame rails than a normal rear truss and gives you a flat surface for bump stops to hit. Additional product details: * 3/8 in. thick mild steel truss top and 1/4 in. mild steel gussets. Precision CNC-cut and bent for great fitment * Works great with Artec modular and short trusses AND virtually any short-style truss, even from other manufacturers * 3.5 in. axle tube diameter * Allows customization of your truss system to fit your needs * Provides a lower profile than a standard rear truss—perfect for clearing rear frame rails and providing a bump stop pad * Truss is reinforced using interlocked 1/4 in. thick gussets for maximum strength and easy assembly * Overall low-profile design means your axle is stronger, sleeker, easier to fit into any vehicle, and less likely to interfere with vehicle components NOTE: The truss end is flat on the end and not contoured to any truss. This requires trimming to fit. This kit requires general welding and fabrication skills. Welding should only be done by a competent welder. Some grinding and fitment may be required when installing this item. Every axle varies slightly and some fabrication may be required.
Not Yet Reviewed
$179.99
Artec Industries tube flanges are precision CNC laser-cut from 1/4 in. thick steel for high-strength. They're available for a variety of tube diameters to suit your project needs. Their inner hole is slightly oversized for easy install and maximum weld penetration, and they feature 3/8 in. bolt holes.
Not Yet Reviewed
$11.99
Artec Industries JL/JT to TJ APEX front swap bracket kits upgrade your Jeep with heavy-duty coil buckets and a robust truss. Engineered to precisely fit JL/JT axles, each kit boasts 3-D-accurate fitment, American-made steel for unrivaled strength, and a seamless weld-on installation that maintains proper clearance. Take on challenging trails with confidence, knowing your rig is fully equipped for the journey with Artec coil bucket brackets. Features and benefits: * Crafted from premium-grade steel, these coil buckets deliver exceptional strength and durability for unmatched performance, even under the harshest off-road conditions * A precision fit engineered to weld seamlessly onto Jeep JL or JT front axles, ensuring precise suspension alignment and a secure, long-lasting fit * Developed using advanced 3-D data from Dana Corp/SPICER and OEM vehicle specifications, guaranteeing the perfect fit and optimal clearance for your suspension setup
Not Yet Reviewed
$199.00
Artec Industries JL/JT to TJ APEX M210 front swap kits upgrade your Jeep with heavy-duty coil buckets. Engineered to precisely fit JL/JT M210 axles, each kit boasts 3-D fitment, ensuring every angle aligns perfectly for optimal ride quality, top-tier performance and reliability. Whether you're navigating rocky trails or cruising highways, these coil buckets deliver the stability and performance upgrade your build demands. Ditch the guesswork and outfit your TJ with a tailored, professional-grade solution from Artec Industries. Features and benefits: * Crafted from premium steel for robust strength and lasting durability, ensuring reliable performance even in the most challenging off-road environments * Designed to weld seamlessly onto Jeep JL or JT front M210 axles, delivering an exact fit that guarantees proper suspension alignment and stability * Developed using advanced 3-D data from Dana Corp/SPICER and OEM vehicle specifications, ensuring precise fitment and optimal clearance for your build
Not Yet Reviewed
$299.00
Artec Industries tube link mounts are designed to mount your control arms to lower links or any other tubing. They're perfect for making your own radius arms or other smaller size links. The durable brackets are constructed from 1/4 in. thick boxed steel for high strength, and their tapered design provides a smooth transition from the mounts to the tubing. These mounts are available in universal and application-specific models.
Not Yet Reviewed
$54.99
Artec Industries TJ/YJ back half frame kits allow many Jeep owners to eliminate the clunky back half of their stock frame and allow clearance for coilovers and/or larger heavy-duty axles. By narrowing the frame, you're able to run coilovers without notching and weakening your factory frame. Plus, since the shocks don't hang as low as the factory frame in the back, you can do a stretch with that one-ton axle and have better up-travel. Artec Industries TJ/YJ back half frame kits feature: * CNC laser-cut and bent from 1/4 in. thick steel * CAD-designed with models directly from Chrysler to fit perfectly * Interlocking jig and key holes for quick, one-way-only assembly * Maximum welding surface area with weld holes and fish mouth ends * Stylish curved design complements factory-style and increases strength at transitions * Wide enough to fit Artec fuel cell mounts for JAZ and RCI fuel cells
( 4 )
$406.99
Strengthen your chassis by welding on some Artec Industries gusseted tabs. These corner reinforcements are precision laser-cut from durable steel, and are available in different thicknesses to best suit your project. The chassis tabs are also offered in a variety of angles and decorative configurations for stylish support.
Not Yet Reviewed
$7.69
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
