Availability
On Sale
APR carbon fiber intake systems let your engine breathe! The stunning carbon fiber design rejects power-robbing heat from your engine bay and efficiently delivers an unrestrictive path for cold, dense air fed from outside the engine bay. These systems use high-flow filters, providing excellent filtration without restrictions—prudently keeping the engine clean and optimizing power delivery. They dramatically outflow your stock intake, sharpening throttle response and lessening strain on the turbocharger. APR carbon fiber intake systems typically install in minutes, look fantastic, instantly deliver a sporty engine note, and are recommended for all stages of performance.
Not Yet Reviewed
$549.95
—
$1,399.95
$399.95
—
$1,049.95
On Sale
APR open carbon fiber intake systems feature a beautiful carbon fiber air dam that directs fresh air into a massively oversized 7 in. cotton filter with frontal inlet. They include thick T304 stainless steel heat shields and air buffer gaps on the back of the carbon fiber shell to reject heat from the engine bay. Doing away with the airbox completely solves the dramatically undersized, power-robbing inlet restriction that's glaringly apparent at higher horsepower levels on the factory system. The 4 in. inlet is compatible with the factory inlet or the upgraded APR Ultracharger System, and efficiently creates an uninterrupted airflow path into the supercharger for maximum results. APR open carbon fiber intake systems are the ultimate air intake solution for your 3.0 TFSI. Features, items, and specs: * Drop-in open system installs in minutes * Flow bench gains up to 268 cfm at 28 in. of water column over stock * Average of 17 AWHP at stage 2+ (93 octane) more than factory system * Extremely precise fitment * Massive airflow improvements * 502 total cfm at 28 in. of H2O stock * SAI breather filter * Billet aluminum mounting feet * Billet aluminum 4 in. flange adapter
( 1 )
$549.95
$399.95
On Sale
Replace your failure prone rubber hose, plastic pipe, and worm clamps with one of these APR charge pipe and hose kits. APR offers the charge pipe and hose kits as a comprehensive upgrade for the 2.0T EA888 Gen 4 engine that addresses each component between the turbocharger and intercooler, and from intercooler to throttle body. This system increases air flow through smooth an uninterrupted airflow paths, and provides increased performance, turbocharger sound, and reliability by upgrading each of the factory components. Kits do vary, and each kit is comprised of multiple components otherwise sold on their own, which in turn saves you time and money. Order the kit designed to fit your application needs. Charge hose features: * Direct replacement parts * Increases performance through smooth airflow paths and reduced boost leak points * Multi-Ply silicone hose construction resists swelling and tearing * Fluorosilicone interior hose surfaces for oil degradation resistance * Strong Clampco T-bolt clamps for a secure high-boost connection * EZ-Flow stepped interior lips for a smooth airflow path * Full 60mm setup * Black finish * Emissions friendly Charge pipe features: * Direct replacement parts * Increases performance through smooth airflow paths and reduced boost leak points * Strong aluminum pipes that resist cracking and melting like OEM components * Billet aluminum meth/sensor bung with NPT tap (TB inlet pipe) * Billet aluminum MAP sensor bungs (TB inlet pipe) * Removes the restrictive and failure prone throttle body inlet internals (TB inlet pipe) * No-slip bead rolled pipe ends * TIG-welded mounting brackets * Full 60mm setup * Satin black finish * Emissions friendly Turbo muffler pipe and hose features: * Direct replacement parts * Complete system replaces the factory turbo muffler and outlet hose * Increases outlet cross sectional area 66 percent by replacing both parts * Reduces outlet restriction * Increases performance through increased size, smooth airflow paths, and reduced boost leak points * Enhanced turbocharger sound * Faster turbocharger spool with better power delivery * CNC-machined billet aluminum muffler pipe * Integrated PCV vent path * Satin black finish on the turbo muffler pipe * Multi-ply silicone hose construction resists swelling and tearing * Fluorosilicone interior hose surfaces for oil degradation resistance * Strong Clampco T-bolt clamps for a secure high-boost connection * EZ-Flow stepped interior lips for a smooth airflow path * Full 60mm setup * Black finish on the hose * Emissions friendly
Not Yet Reviewed
$799.95
$324.95
On Sale
APR replacement air filters are designed for their intake systems, meaning when you need a new filter, APR replacements should be your first and only choice. They feature high-quality construction with lightly oiled pleated cotton gauze. They will provide the perfect fit, along with the filtering performance and unrestricted airflow to maintain optimal operation of your APR intake system.
Not Yet Reviewed
$54.95
—
$109.95
$30.22
—
$60.95
On Sale
APR offers air intake components for an easy and affordable way to replace your worn-out or missing parts. Each piece is designed with the original factory shape to ensure an authentic look to meet your needs. Order the APR air intake components best suited to provide the optimal fit, form, and function for your ride!
Not Yet Reviewed
$9.95
—
$24.95
$5.47
—
$13.72
On Sale
APR carbon fiber intercooler ducts for the Porsche 992 3.0T dramatically lower intake air temperature (IAT) by increasing airflow through the ambient air path of the intercooler cores. In doing so, the engine makes more power and sustains power levels for longer—as IAT is kept away from the knock threshold of the engine and IAT-based power reduction safety routines of the factory ECU. Multiple back-to-back wide-open-throttle acceleration tests proved APR intercooler ducts reduced IAT as much as 9.6 degrees C (17.3 degrees F) or 15 percent better than stock! The APR intercooler ducts are made from carbon fiber, allowing the cooling ducts to be formed to the exact shape necessary to fit into the tight engine bay within the 992's rear-end. The vents allow for maximum flow through the system, while continuing to connect the system to the rest of the factory ducting. Everything simply slides into place with no extra hardware required. A gorgeous matte finish with a gloss APR logo adorns the system, giving it a motorsport-inspired feel, which is unfortunately tucked out of view with the rear bumper installed. Testing: The 911 must be tested on the street, rather than a dyno, to capture real world cooling data. This is especially true because of the rear engine design. In real world driving, air is forced through the cooling ducts differently than it is on a stationary dyno, even with excellent cooling fans. During development, APR engineers fully instrumented the engine to find the limitations of the factory hardware. It was quickly determined the factory intercoolers struggled with airflow through the ambient cooling paths. By redesigning the cooling ducts, more high-pressure ambient air could be forced through the system to maximize effectiveness of the coolers. To illustrate their importance, wide open throttle acceleration tests were conducted for roughly 11 seconds, both with stock cooling ducts and APR cooling ducts. IAT was measured post-intercooler with high-quality thermocouples. Ten back-to-back tests were conducted with each setup, and the results were averaged together. With the stock ducts in place, IAT rose to 66.2 degrees C (151.2 degrees F). This is above the factory knock threshold of 60 degrees C (140 degrees F) and is approaching the ECU power reduction limiter at 70 degrees C (158 degrees F). Once this IAT threshold is crossed, the ECU will begin aggressively reducing engine power to protect the engine. By simply swapping to the APR intercooler ducts, IAT dropped 15 percent, or 9.6 degrees C (17.3 degrees F), leveling off at 56.6 degrees C (133.9 degrees F). This is below the knock threshold and safely away from the power reduction threshold! APR Intercooler ducts are a simple and cost effective upgraded to the 992 3.0T and should be considered by any customer, at any stage of performance, looking to maximize the performance of their 911! Product features: * Improved intake air temperature (IAT) by 15 percent over stock * Organic matte carbon fiber design with gloss APR logo * Lightweight material and design * No extra hardware required * Plug-and-play upgrade * Retains factory intercooler post-housing ducting * Excellent performance per dollar upgrade for the Porsche 911 * Emissions compliant
Not Yet Reviewed
$699.95
$384.95
On Sale
APR turbocharger inlet systems are designed to outflow the factory components. These inlet systems use a 4 in. carbon fiber inlet tube that connects directly to the factory air box. These kits also include a cast aluminum inlet, which is designed to retain the largest possible cross-sectional area within the pipe all the way to the inlet of the turbocharger's compressor cover. Making the cross-sectional area large is the key to the performance gains of these kits. Upgrade your ride with an APR turbocharger inlet system today!
Not Yet Reviewed
$324.95
$211.95
On Sale
APR throttle body inlet system is a comprehensive upgrade to the factory charge pipe system from the intercooler outlet to the throttle body. APR replaces all the components and provide a new, larger, free flowing system that flows roughly 34 percent more than stock. This was achieved by increasing the cross-sectional area of the system and by reducing the tight radius bend directly in front of the throttle body. This system does away with two potential boost leak points thanks to their single cast design. They have upgraded the intercooler outlet hose to a multiply wire-reinforced silicone design with T-bolt clamps that resist boost leak over the stock counterpart. APR's new billet throttle body to manifold adapter provides a convenient boost and vacuum reference point which can be used to for a gauge or anything else that suits your build. Lastly the system comes complete with new throttle body and intake manifold gaskets, which are common leak points many never know to address.
Not Yet Reviewed
$168.55
$74.95
On Sale
The APR throttle body coupler is a comprehensive, direct replacement upgrade to the factory rubber hose found in the charge piping system. The system includes a multitude of enhancements designed for maximum performance, longevity and insurance against power robbing boost leaks. This specific coupler is fully compatible with the OEM and upgraded APR Intercooler system, OEM throttle body and all OEM turbochargers.
Not Yet Reviewed
$54.95
$24.95
On Sale
APR intercooler hoses replace the factory rubber hoses and worm-gear clamps with high-quality multi-ply silicone hoses and strong Clampco T-bolt clamps. The interior of the hoses are smooth and lined with a Fluorosilicone material designed to resist oil degradation and extend component life. EZ-Flow stepped lips within the hoses allow for a smooth connection from hose to pipe for uninterrupted airflow. APR pays close attention to the airflow path and provide as few bends and tight radius turns as possible. Furthermore, the hose material adheres to its mating surface under high temperature to help create a stronger leak and slip free connection. This all results in a more reliable setup and increased performance through a smooth and strong uninterrupted airflow path. Features: * Direct replacement parts * Hoses are compatible with both OEM and upgraded APR charge pipes and intercoolers * Increases performance through smooth airflow paths and reduced boost leak points * Multi-ply silicone hose construction resists swelling and tearing * Fluorosilicone interior hose surfaces for oil degradation resistance * Strong Clampco T-bolt clamps for a secure high-boost connection * EZ-Flow stepped interior lips for a smooth airflow path * Full 60mm setup * Black finish * Emissions friendly
Not Yet Reviewed
$173.95
$49.95
On Sale
APR turbo outlet pipes replace the factory plastic pipe with a high-quality aluminum pipe that is a constant diameter within. APR pays close attention to the airflow paths and provide as few bends and tight radius turns as possible to maximize performance. Unlike the factory plastic pipes, APR's won't melt and crack under extreme conditions. This direct replacement piece additionally deletes the turbo muffler, which is integrated into the pipe on the Golf R/S3 and similar platform vehicles. The pipe features bead rolled connection points to resist hose slippage, and all mounting brackets are TIG-welded to the pipe for a strong connection. Finally, the pipe is finished in an attractive satin black finish. This all results in a more reliable setup and increased performance through a smooth and strong uninterrupted airflow path. Plus, these hoses are compatible with both OEM and upgraded APR charge hoses.
Not Yet Reviewed
$209.95
$99.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
