Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
Allstar Performance Cam Bearing Installation Tools
If you need to install cam bearings in a small block Chevy, then you definitely want Allstar Performance cam bearing installation tools. These tools are must-haves for installing or removing your cam bearings quickly and easily without damage. The tools are crafted with a steel shaft and an aluminum pilot and driver.
( 160 )
$43.99
Allstar Performance Flywheel Locking Tools
Allstar Performance flywheel locking tools stop the spinning motion while you work. Simply place the tool onto the rear block dowel pins to prevent the flywheel from turning while tightening or loosening balancer bolts, flywheel bolts, clutch/pressure plate bolts, or cam gear bolts. The locking tools work with 153- or 168-tooth flywheels and flexplates.
( 15 )
$35.99
Allstar Performance Spark Plug Indexing Tools
If you perform engine work, Allstar Performance spark plug indexing tools are extremely helpful in getting the job done right! It's no surprise that high-compression engines run better when the plugs have been indexed. These handy devices fit 14mm spark plugs, positioning the ground strap properly for the best piston dome clearance; they'll work fine with either flat gasket or tapered seats. In tandem, the index tool unshrouds the electrode for a more even burn and possible gains of 5 to 15 hp. Instructions are included for easy operation.
( 4 )
$20.99
Allstar Performance Valve Stem Puller Tools
It's easier than you think to install new valve stems in your wheels--well, that is, if you have the right tools. All star valve stem pullers thread onto the valve stem and properly pull the rubber valve stem into place. It's that quick and that easy! Plus, these tools feature a large rubber block to protect expensive wheels and also create leverage when pulling. And if you think these valve stem puller tools are nifty, be sure to check out the rest of Allstar's wheel accessories and tire tool lineup.
( 7 )
$24.99
Allstar Performance Deburring Tools
Allstar Performance deburring tools are a fast and easy way to remove burrs from the edges of machined or cut metal. They include a handle with built-in storage for the blades and a telescopic blade holder that is adjustable from 1-5 in. long.
( 12 )
$28.99
Allstar Performance Punch and Flaring Tool Replacement Components
Allstar Performance punch and flaring tool replacement components maintain the operation of your spring steel punches. Allstar provides replacement mandrels, mandrel bolts, and top plates to keep your hammer and impact-type punches performing like new.
Not Yet Reviewed
$46.99
Allstar Performance Body Radius Tools
Allstar Performance body radius tools can be used to flare the edges of your wheel openings when you're fabricating fenders and quarter-panels out of aluminum. The solid oak hand tools are designed with two different radii to help you create the correct flare for your project.
Not Yet Reviewed
$46.90
Allstar Performance Double Flare Tools
Allstar Performance double flare tool sets include five thread dies for forming flares on 3/16 in., 1/4 in., 5/16 in., 3/8 in., and 1/2 in. aluminum and steel tubing, and .040 in. copper tubing at 45 degrees. They are great tools to use for custom-length brake and fuel line assembly projects.
( 1 )
$29.99
Allstar Performance Koul Tool AN Hose Assembly Tool Kits
Eliminate the struggle of building stainless steel braided lines with Koul Tool AN hose assembly tool kits from Allstar Performance. Made from high-tech composite material, these Koul Tools will help you get the job done! Just insert the desired fitting into the specially designed holder, which helps guide the braided hose into fitting. It's that quick and easy! Each kit contains an assortment of tools, fitting adapters to fit most fittings, and detailed assembly instructions. Plus, all kit components come conveniently stored in a durable, portable plastic case.
( 9 )
$35.99
Clearance
Allstar Performance Ball Joint Spreader Tool Extensions
Allstar Performance ball joint spreader tool extensions are used with Allstar's ball joint spreader tool. They slide easily into the bottom of the ball joint spreader tool for use in tight quarters for separating a ball joint from a control arm or spindle.
Not Yet Reviewed
$34.99
Allstar Performance Pinion Centering Jigs
Allstar Performance pinion centering jigs will assist you when building or narrowing housings. They fasten to the rear end housing to locate the pinion centerline and the machined slots are designed to retain most tape measure ends for accurate measurements. When you need a pattern for performance, Allstar pinion centering jigs have the applications.
( 2 )
$45.99
Allstar Performance Tire Siper Heads
Allstar Performance tire siper heads are designed for use with Ideal IHK 125 grooving irons; or pistol grip and other heated sipers that accept a 0.400 in. round mandrel. These heads have spacers to convert grooving irons to a 4- to 8-blade siping tool.
( 1 )
$49.99
Allstar Performance Pilot Bearing Drivers
Allstar Performance pilot bearing drivers provide easier installation of pilot bushings and bearings. They are designed for use with motor mounts, adapters, or mid-plates where the distance between the engine and bellhousing is increased.
( 19 )
$26.99
Allstar Performance Tire Grinding Discs
Allstar Performance tire grinding discs are designed to grind off the hardened outer skin on dirt track tires. This creates round, aggressive sipes that increase traction. The grinding discs are offered in a choice of materials, sizes, and grits.
( 5 )
$42.99
—
$45.99
Allstar Performance Tire Siper Blades
Allstar Performance tire siper blades are designed for use in your Allstar Performance heated tire sipers and 8-blade siping heads. Allstar Performance tire siper blades are breakaway blades that are easily removed or separated using needle-nosed pliers.
Not Yet Reviewed
$20.99
Allstar Performance Connecting Rod Guide Tools
Allstar Performance connecting rod guide tools are a must for engine builders. These simple devices make the installation or removal of your piston and rod assembly much less of a hassle. They cover and protect exposed piston rod bolts while safely guiding the piston rods in and out of position. The durable plastic tools include two sets of adapters that quickly snap in and out of the prong ends. Plus, if your crankshaft angle is incorrect, the tool will not allow you to continue until corrections are made! Remove and install piston rods without damage to your crankshaft or piston cylinder walls with an Allstar connecting rod guide tool.
( 11 )
$29.99
Allstar Performance Tire Gauges
Test your tire pressure with an Allstar Performance tire gauge. They offer several styles with flexible hose, swivel chucks for easy placement on valve stems, and pressure release valves. Choose from Allstar's 2 1/4 in. or 4 in. glow-in-the-dark faces in different psi ranges or their 2 in. standard face in different psi ranges. All styles provide accurate readings for precise pressure adjustments.
( 15 )
$26.99
—
$49.99
Allstar Performance Valve Lash Adjusting Wrenches
Allstar Performance valve lash adjusting wrenches can save you valuable time and also help eliminate fumbling with two separate wrenches. Innovatively designed, these wrenches feature a box wrench and Allen wrench all-in-one tool! They are made of steel with insulated handles and are available for use with Jesel, T&D, and other polylock-style rocker assemblies.
( 9 )
$38.99
Allstar Performance Cleco Plier and Pin Kits
Allstar Performance Cleco plier and pin kits lend a hand with your fabrication project. The kits are available with either 1/8 in. or 3/16 in. reusable pins that work with thicknesses up to 1/4 in. and the unique tool to remove and install the fasteners. The Cleco pliers are also available individually without pins, if you need just the tool. Create a temporary connection between sheet metal pieces with Allstar Cleco pliers and kits.
( 11 )
$20.99
—
$21.99
Allstar Performance Quick-Change Gear Cases
Allstar Performance quick-change gear cases are sturdy composite storage boxes that will protect and hold up to eight sets of quick-change gears. The cases feature molded-in carrying handles and metal hinges.
( 5 )
$49.99
Allstar Performance Curved Tire Spoons
Allstar Performance curved tire spoons are designed to help you mount and dismount tires after the bead has been broken. They're available in various sizes to work with most tire and wheel combinations. The small tool fits inside the tire during removal, while rounded ends help prevent damage to both the tire and wheel. Allstar curved tire spoons are made of durable steel material to provide strength and leverage, and have a black oxide finish to resist corrosion. If you're not equipped with a tire machine, Allstar Performance curved tire spoons are a handy tool designed for fast and efficient tire changing.
( 3 )
$29.99
Allstar Performance Wheelie Bar Wheel Wrenches
Allstar Performance wheelie bar wheel wrenches are crafted from 3/8 in. thick billet aluminum and are the perfect tools for rapidly and easily adjusting wheelie bar height. Highly visible scales printed directly onto the wrenches help to quickly measure wheelie bar height from 2 in. to 7 in. in 1/8 in. increments. Overall wrench length is 9 in. and they are available for a variety of jam nut sizes.
Not Yet Reviewed
$46.99
Allstar Performance Pinion Yoke Wrenches
Secure the position of the yoke to set bearing preload with Allstar Performance pinion yoke wrenches. These forged steel tools will fasten to most popular pinion flanges and companion flanges. The wrenches are slotted and cut to work with 1/2 in. or 3/4 in. drive tools. They'll clear most sockets (center hole is 2 in.), and feature slotted bolt patterns for 1/4 in., 5/16 in., and 3/8 in. fasteners to fit most AMC, Dana, Ford, and GM yokes. Allstar Performance pinion yoke wrenches are great tools to assist you when setting preload and tightening retaining bolts and nuts.
( 24 )
$23.99
Allstar Performance Bead Breakers
Allstar Performance bead breakers are designed to make quick work of breaking down even the most stubborn tire beads. They feature durable steel construction and comfortable rubber hand grips. The tools are available with a standard jaw, standard with adjustable arm, or a special wide-jaw version that works exceptionally well with softer sidewall tires.
( 24 )
$49.99
