Availability
Allstar Performance torsion stop bolts are included with your torsion arm stops. They are also offered individually as replacements or upgrades. Allstar torsion stop weight adjuster bolts are made from titanium with 7/16 in.-20 thread and include nuts. Choose singles or set of four.
Not Yet Reviewed
$105.99
Titanium fasteners are prized for their strength, lighter weight, and corrosion resistance. Allstar Performance offers many fasteners and kits to secure your project. Allstar Performance offers different shock stud kits. Each will include titanium studs and nylon locking half nuts to mount shocks to chassis/front axle or rear torsion arms. Select the kit needed. * Shock stud kits for frame boss and spuds include four studs and nylon locking half nuts to mount shock to chassis or front axle. Studs have 1/2 in.-20 threads that fit directly into pre-threaded bungs. * Shock stud kits for rear torsion arm include two studs with large support cones and four nylon locking half nuts to mount shock to most rear torsion arms. Studs and nuts weigh less than 50 grams.
Not Yet Reviewed
$114.99
If you're in need of lug nuts specific to your application, look to Allstar Performance. They offer a wide selection of steel or aluminum lug nuts in SAE or metric threads.
( 53 )
$102.99
—
$209.99
Allstar Performance countersunk bolt kits consist of specially designed washers, either aluminum or plastic, which allow the socket head fasteners to install flush with the surface, creating a smooth, finished appearance. They have many uses, including mounting roofs, spoilers, side skirts, and replacing sharp-edged fasteners inside the cockpit. The kits contain washers, bolts, and nyloc nuts for fastening. Aluminum washers are available with a clear or black anodized finish. Plastic washers are available in a variety of colors. Select the washer material and color preferred for your Allstar countersunk bolt kit.
( 4 )
$104.99
Allstar Performance titanium front hub bolt kits include five smooth head fasteners with a built-in hex for securing into the hub, along with five shoulder nuts. If you prefer lightweight, extremely durable hardware, Allstar titanium bolt kits are sure to please.
Not Yet Reviewed
$116.99
Protect your race car's front-end with Allstar Performance bolt-on front bumpers. Designed to fit most tubular and stock stubs, they brace the nose and protect the front of the car. Allstar Performance bolt-on front bumpers feature 30 in. center-to-center frame mounting brackets and are available for most popular body styles.
( 1 )
$155.99
—
$209.99
Allstar Performance torque converters offer power and economy for your moderate drag racing, factory, or street stock machines. These Allstar converters are completely remanufactured with new pump drive hubs and thrust washers. Choose from several stall speeds for your GM, Chrysler, or Ford transmission. Exact stall speeds will vary, depending upon displacement, torque, and vehicle weight. Transfer your engine torque with value-priced Allstar Performance torque converters.
( 9 )
$239.99
Allstar Performance tire prep stands are a must when grooving, siping, grinding, or even cleaning tires. They bolt together easily and feature a pivoting head for quick tire mounting and a locking T-handle to secure the head assembly. Allstar tire prep stands can be used with 5 x 5 in. and most Wide 5 Circle Track type wheels.
( 5 )
$244.99
Allstar Performance aluminum rotor hats fit 8-bolt rotors with a 7 in. bolt circle mount. They're made of heavy-duty cast aluminum with a 3 in. offset—and are drilled for 4.50 in., 4.75 in., and 5.00 in. bolt circles and 1/2 in. wheel studs. These rotor hats have a 3.060 in. diameter centering hole and fit axle flanges with up to a 6.050 in. diameter.
Not Yet Reviewed
$114.99
Custom axles can be an expensive option for racers. Instead, consider Allstar Performance cut-to-fit flanged axles for your street, dragstrip, and Circle Track vehicles. Ideal for Ford 9 in. rear-ends, these carbon steel axle shafts have multiple wheel bolt patterns for 5 on 4 1/2 in., 4 3/4 in., and 5 in. bolt circles, and they're drilled for press-in style studs (sold separately). These axles are available in various lengths, with or without bearings. Select the bolt-in model designed for the best fitment on your application.
( 5 )
$199.99
—
$226.99
These Allstar Performance cast aluminum valve covers feature two 1 3/8 in. baffled breather tubes on one side and none on the other. They are manufactured from high-quality aluminum and have a polished finish. Their thicker design offers improved gasket sealing and a built-in spreader for secure mounting.
( 11 )
$132.99
—
$169.99
Need to gain a few pounds? Automotively-speaking, of course. Allstar Performance ballasts will help you pack on the pounds in the proper places. Their selection of shapes, materials, and weight choices will assist you in positioning the ballasts exactly where you need them for added speed on the track. More grip for your car and the ability to go faster around the turns is possible with Allstar Performance ballast weights.
( 2 )
$112.99
Allstar Performance fabricated aluminum valve covers feature lightweight construction with a thick rail for gasket support. They are TIG-welded and are manufactured to help eliminate distortion and ensure a perfect fit to help protect your valve covers and rocker arms. The covers come standard with tubes, or without tubes for use with any wet or dry sump race engine. Mounting hardware is included to provide a hassle-free installation.
( 5 )
$174.99
—
$199.99
Eliminate the need to manually uncap the exhaust. Allstar Performance electric exhaust cutouts bolt to a standard 3-bolt collector flange and uses a powerful geared motor to open and close a butterfly valve to direct exhaust. These 12 V electric cutouts are available in 2 1/2 in. and 3 in. collector patterns
Not Yet Reviewed
$129.99
Allstar Performance fill plug kits enable you to put a fill plug where you need it. They include an aluminum or steel bung for use as an inspection plug or filler plug, plus an easy-grip cap with an O-ring for a positive seal. The kits are available with a small 1 3/8 in. opening or a large 3 in. diameter opening. These weld-on or bolt-on fill cap kits are available in a variety of styles and finishes.
( 18 )
$104.99
Allstar Performance ring and pinion gear sets are engineered, manufactured, and tested for maximum performance. The high-quality differential components are suitable for race, street, and off-road use. Their superior quality is the result of years of development, outstanding design, and state-of-the-art machining methods. Allstar ring and pinion sets are available in many different ratios to fit a variety of differentials. Plus, they're perfectly matched to provide you with reliable and quiet operation.
( 52 )
$169.99
Run cool with Allstar Performance directional vane rotors. They have 36 directional cooling vanes, allowing your brakes to run much cooler than conventional rotor designs. Allstar directional vane rotors fit solid mounting brake hats or hubs.
Not Yet Reviewed
$108.99
In the unfortunate event of an engine failure, Allstar Performance has you covered with these high-quality engine diapers. They will contain engine oil and fragments, lessening the chance of control loss due to debris on the racing surface. These diapers wrap around your oil pan and attach to the header bolts. Allstar Performance engine diapers are available in NHRA/IHRA and SFI-approved versions.
( 7 )
$154.99
Prevent mandrel bolt breakage with Allstar Performance crank pulley mandrel kits. Designed specifically for Allstar crank pulleys, these kits provide you with all of the necessary components to connect the mandrel bolt to the mandrel—not the crankshaft—reducing engine harmonics to prevent loosening or breaking. The mandrel kits include all necessary spacers, pulley guides, and bolts to work with most 3, 4, and 5-stage dry sump pumps or belt-driven fuel pumps. (The crank pulley mandrel is also available separately, if desired.)
( 1 )
$169.99
Allstar Performance brake line hose kits are available to fit Big GM or metric applications. Kits include everything necessary to complete the connection between a 3/16 in. steel brake line and the brake caliper. Each of these kits includes: * Stainless steel braided hoses * Banjo bolts * Banjo fittings * Crush washers * Steel brake line adapters * Brake line tabs * Brake line clips
( 37 )
$109.99
—
$229.99
Allstar Performance ring and pinion installation kits contain all of the hard-to-find individual parts for a quick, trouble-free install. To ensure precise fitment, order the kit designed for your specific axle model. Kits include: * Pinion and side (carrier) bearings * Pinion seal * Pinion depth shims * Adjustable side (carrier) shims * Crush sleeve (spacer) * Pinion nut * 1 oz. tube of silicone or gasket * Gear marking compound * Ring gear bolts
( 3 )
$103.99
—
$167.99
Allstar Performance clamp-on trailing arm brackets are offered in steel and aluminum versions. The steels models are universal brackets to mount coilover eliminator and shock next to axle and mount trailing arm 4 1/2 in. below the axle centerline, either inside or outside of the bracket. They allow Limited Late Models and Modifieds to be changed from coilover to a coilover eliminator and shock. They include Grade 5 hardware and Nyloc nuts. The aluminum brackets clamp to a 3 in. diameter axle tube, has three 3/4 in.-10 mounting holes for trailing arm location, and a 1/2 in.-13 socket head bolt with two 1/4 in. spacers for mounting a coilover shock. An additional locking bolt installs into the axle tube to help prevent the bracket from turning. They can be used on the right- or left-hand side of housing.
Not Yet Reviewed
$112.99
Allstar Performance sway bar arms are made from 3/4 in. thick mild steel. They're offered straight, 15 degree, and 30 degree angles, with different hole size options. The replacement sway bar arms can be cut to length and bent to fit any width chassis. A pinch bolt is also included.
Not Yet Reviewed
$114.99
—
$119.99
Titanium fasteners are prized for their strength, lighter weight, and corrosion resistance. Allstar Performance offers a long list of bolts, studs, screws, and more to secure your project. Allstar Performance header stud kits include 14 studs with 3/8 in.-24 thread on one end and 3/8 in.-16 thread on the opposite end, and 12-point steel shoulder nuts to work with most style headers. The overall stud length is appx. 1 1/4 in. and each kit weighs a total of 185 grams.
Not Yet Reviewed
$158.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
