Availability
aFe Power offers Scorcher high performance ignition coils for a wide range of cars, trucks, and vans—including models by Chrysler, Dodge, Jeep, Ram, BMW, Cadillac, Chevrolet, GMC, Ford, Lincoln, Lexus, Scion, Toyota, Audi and Volkswagen from 2000 and up. These premium coils are a direct replacement upgrade over your stock originals. They feature a lower primary resistance than factory coils, resulting in a high energy spark that ensures complete combustion from idle to redline. Scorcher ignition coils keep pace with the demands of higher RPM ranges and at wide-open throttle, always delivering the peak performance you expect. Order the model recommended for your vehicle. Additional details: * Up to 20 percent more spark energy * Increase horsepower and torque * Improved drivability and smoother idle * Easier cold starts * Longer coil life * Available individually or in a set of 4, 6, or 8
( 3 )
$86.10
aFe Power carbon cabin air filters clean the air entering through the ventilation system of your vehicle by reducing impurities such as dust, soot, and pollen. They contain activated carbon granules to help remove odors and fumes for cleaner, fresher cabin air for you and your passengers. Available in styles to fit a large range of different vehicles, aFe Power carbon cabin air filters are easy to install and will help keep the A/C evaporator clean and microbe-free. Choose the filter designed for your vehicle.
( 4 )
$24.00
aFe Torque Booster air intake tubes provide smooth and direct airflow for minimal pressure loss and maximum cfm gains. The aFe air intake tubes improve throttle response and acceleration. The black textured molded tubes help reduce heat transfer to the air intake. For better performance, upgrade your stock intake with an aFe Torque Booster air intake tube.
( 3 )
$82.00
—
$88.00
If your vehicle spends most of its time on the street, and you desire to maximize airflow, then aFe Pro Dry S air filter elements are an excellent choice. These synthetic oil-less filters feature three layers of progressive media for optimum filtration and flow even when dirty. The filters bump seals eliminate the need for sealants or gaskets since they conform to the filter housings, and always return to their original form. Full 360 degree urethane frames allow proper OE fitment and strength. The elements are available in a wide variety of styles and sizes for fitment on countless applications. For more flow and less mess, order an aFe Pro Dry S air filter element.
( 121 )
$60.00
—
$76.00
With 100 percent polyurethane top and bottom construction, these oiled, high-flow aFe Pro 5R air filter elements outperform stock paper filters—while improving horsepower and torque. The five layers of progressively finer mesh cotton gauze give a whole new meaning to incredible airflow. These filter elements are washable and reusable and are available in a variety of sizes and styles, providing incredible dust-holding capacity. Order the aFe Pro 5R air filter element model that is best suited for your application needs.
( 78 )
$54.00
—
$70.00
aFe Takeda exhaust systems are constructed of superior quality mandrel-bent 304 stainless steel and are designed to produce significant horsepower gains. They utilize single and dual, high-flow transverse mufflers. Some models include an X-pipe balance tube, which equalizes and evenly distributes exhaust pulses for increased flow and performance across the power band, while maintaining great sound. The finishing touches on these exhaust systems are their laser-etched, slash-cut polished 304 stainless steel tips. Many options are available, such as cat-back and rear axle-back styles; exit quantity and location; and tailpipe diameters. Order the kit designed for your vehicle application.
( 17 )
$601.65
—
$1,242.15
aFe Sprint Boosters offer your ride an adrenaline kick! Designed for ETC systems, or drive-by-wire, these simple-to-install power modules plug into the OE connector located behind the accelerator pedal--no wires to cut. aFe Sprint Boosters deliver improved acceleration and reduce throttle response time. They will not affect your vehicle's electronic system and offer three settings for better drivability: factory (off), sport (green), and race (red). Raise the performance level of your ride with aFe Sprint Boosters.
( 20 )
$311.85
aFe Control Series sway bar kits are designed for automotive enthusiasts looking for superior cornering. These perfectly balanced, lightweight CNC-machined tubular sway bars will improve your handling and inspire driving confidence. They provide TIG-welded bar ends for a precise fit and added strength, along with polyurethane bushings and mounting hardware for a complete install.
( 3 )
$350.00
—
$535.00
aFe Takeda Momentum Pro Dry S cold air intake systems provide extreme performance without compromising style. Outflow your factory intake, and allow your car's engine to breathe and perform to its greatest potential with aFe Takeda Momentum systems. Features include: * High-quality, one-piece, roto-molded sealed housing with auxiliary air inlet * Housing is heat soak-resistant cross-linked polyethylene * CAD-designed, dyno-tuned, roto-molded intake tube * Built-in sight window provides easy inspection of filter without disassembly (not on all styles) * Pro Dry S 3-layer oil-free progressively finer synthetic media for efficient filtration * Unique filter-to-housing interface for easy installation * No cutting or drilling on factory parts * Premium clamps and hardware are included * Stainless steel clamps and a silicone coupling for strength and durability (not on all styles) * Takeda Momentum intakes are designed with fewer parts for a quick and simple installation
( 3 )
$384.00
aFe Pro GUARD HD oil filters deliver the increased flow and efficiency demanded in today's vehicles--gas or diesel. These direct OE replacements utilize a high performance synthetic media for maximum filtration with minimal flow restriction, and are offered in cartridge and canister styles to fit a variety of applications.
Not Yet Reviewed
$15.75
—
$53.90
aFe ProGuard D2 oil filters are designed to keep dirt, rust, and other contaminants from getting into your engine. They're made from a synthetic composite material that provides excellent filtration and performance. Additionally, each aFe ProGuard D2 oil filter is thoroughly tested to meet your expectations for form, fit, and function.
( 14 )
$10.50
—
$53.90
aFe Twisted Steel headers are constructed of 409 stainless steel tubing with thick, CNC-machined flanges to ensure a leak-free seal. They incorporate a merge collector design, reducing the turbulence that occurs when using the traditional form collector-style designs. The performance gains are obvious when coupled with a high-flow Y-pipe. The aFe headers feature a tuned length primary that is out-flowing the stock manifolds by as much as 46 percent. Order the style and configuration tailored to your vehicle and engine application.
( 20 )
$1,146.00
Designed to deliver more horsepower and torque, aFe Silver Bullet throttle body spacers make an excellent addition to your vehicle. They're precision-machined from T-6061 billet aluminum to exacting specifications to provide optimal performance. The combination serrated/helix design creates turbulence so that the air/fuel charge is thoroughly mixed for a complete burn. Their specially-designed serrated edge will reduce the whistling sound normally associated with throttle body spacers. The aFe Silver Bullet throttle body spacers increase the volume between the throttle and cylinder, improving volumetric efficiency.
( 90 )
$137.00
aFe Takeda Momentum Pro 5R cold air intake systems provide extreme performance without compromising style. Outflow your factory intake, and allow your car's engine to breathe and perform to its greatest potential with aFe Takeda Momentum systems. Features include: * High-quality, one-piece, roto-molded sealed housing with auxiliary air inlet * Housing is heat soak-resistant cross-linked polyethylene * CAD-designed, dyno-tuned, roto-molded intake tube * Built-in sight window provides easy inspection of filter without disassembly * Pro 5R pre-oiled 5-layer progressively finer mesh cotton media for maximum airflow * Unique (patent pending) filter-to-housing interface for easy installation * No cutting or drilling on factory parts * Premium clamps and hardware are included * Takeda Momentum intakes are designed with fewer parts for a quick and simple installation
( 9 )
$372.00
The aFe Takeda Attack Stage 2 Pro Dry S cold air intake systems' in-house dyno testing resulted in max gains of +21 hp and +24 lbs.-ft. of torque, outflowing factory intakes by 56 percent. Their CAD-designed roto-molded red intake scoop captures coolest air available; while a high-quality ABS plastic heat shield blocks unwanted engine heat. The intakes are offered in 2.75 in. polyethylene or mandrel-bent aluminum tubes to improve volumetric efficiency for better performance. The Pro DRY S air filter features three layers of oil-free progressive synthetic media for maximum convenience. No cutting or drilling on factory parts is required for installation; all clamps, coupling, and hardware are included for a direct bolt-on. Order the model recommended for your vehicle and engine application.
Not Yet Reviewed
$361.00
aFe Takeda Stage 2 Pro Dry S short ram air intake systems are designed to look as good as they perform. The short ram intake is perfect for areas with inclement weather, by moving the filter up you are less likely to collect debris or suck water into the filter. The Pro Dry S filter provides 360-degree radial flow to maximize air flow and is easy to clean with simple soap and water, no need for oil. Best of all each aFe Takeda Stage 2 Pro Dry S short ram air intake is a direct fit, utilizing factory mounting points for and easy, clean installation.
( 5 )
$350.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
