Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
aFe Momentum Pro 5R Air Intake Systems
Momentum Pro 5R air intake systems from aFe are designed around a large pre-oiled 7.5 in. tall, oval, cotton media filter with five layers of progressively finer mesh to maximize performance. These incredible filters fit into equally impressive one-piece housings with auxiliary air scoops and large clear sight windows. When combined with the housings, these aFe air intake systems outflow the factory unit by 31 percent—yielding average gains of 11 hp and 13 lbs.-ft. of torque. They also include a urethane plug to block the scoop if not used. Give your engine more go power with aFe Momentum Pro 5R air intake systems.
( 12 )
$451.00
—
$479.00
aFe Magnum Force Stage 2 Pro 5R Air Intake Systems
aFe Magnum Force Stage 2 Pro 5R air intake systems are designed to outflow and outperform your factory intake. Using durable, one-piece, 16-gauge powdercoated heat shields, the Stage 2 intakes feature aFe's Pro 5R air filters that improve airflow for increased horsepower and torque. These Magnum Force systems also utilize precision-designed, heat-insulating, roto-molded intake tubes that increase airflow with improved volumetric efficiency for maximum performance. With five layers of progressively finer mesh cotton gauze media between a 100 percent polyurethane top and base, Pro 5R high-flow, oiled, conical filters are washable and reusable for multiple cleanings. Their tall, open, evenly spaced pleats provide excellent dust-holding capacity for longer service cycles between cleanings. In addition, a pliable polyurethane flange with integrated bumps assures a tight, no-leak seal over the life of the filter.
( 67 )
$362.95
—
$581.00
aFe Magnum Force Stage 2 Pro Dry S Air Intake Systems
aFe Magnum Force Stage 2 Pro Dry S air intake systems are designed to outflow and outperform your factory intake. Using durable, one-piece, 16-gauge powdercoated heat shields, these Stage 2 intakes feature aFe's Pro Dry S air filters that improve airflow for increased horsepower and torque. Magnum Force systems also utilize precision-designed, heat-insulating, roto-molded intake tubes that increase airflow with improved volumetric efficiency for maximum performance. With three layers of progressively finer mesh synthetic media between a 100 percent polyurethane top and base, Pro Dry S high-flow, oil-free, conical filters provide maximum convenience and easy maintenance with excellent airflow and 99.2 percent filter efficiency. Washable and reusable, their tall, open, evenly spaced pleats provide excellent dust-holding capacity for longer service cycles between cleanings. A pliable polyurethane flange with integrated bumps assures a tight, no-leak seal over the life of the filter. These air intake systems are also easy to install and maintain.
( 26 )
$354.00
—
$462.00
aFe Control Sway Bars
aFe Control Series sway bar kits are designed for automotive enthusiasts looking for superior cornering. These perfectly balanced, lightweight CNC-machined tubular sway bars will improve your handling and inspire driving confidence. They provide TIG-welded bar ends for a precise fit and added strength, along with polyurethane bushings and mounting hardware for a complete install.
( 3 )
$365.00
—
$719.00
aFe Control Arm Bushing Kits
aFe Control arm bushing kits are designed to eliminate OE bushing deflection to reduce camber change and can greatly improve steering response. These control arm bushing kits are available in your choice of either polyurethane which is suitable for both track and street use, or with solid spherical bearings, which is recommended for dedicated track use. aFe Control arm bushing kits feature: * Improved handling with a comfortable ride * 6061 hard-anodized T-6 aluminum sleeves, combined with a micro-porous surface for excellent grease retention * Specially grooved, graphite-impregnated polyurethane bushings for superior grease retention and quiet operation * Snap ring and plate system adds strength and stiffness, eliminates bushing failure aFe solid spherical kit features include: * Mono-ball, spherical joints to eliminate friction and deflection * 6061 T-6 aluminum bearing housings with Mil-Spec, corrosion-resistant anodizing * CNC-machined, heat-treated 17-4 PH stainless steel shafts * CNC-machined 6061 T-6 articulation spacers * High-articulation spherical bearings * Easy installation into OE control arms—no machining or welding required * Replaceable, PTFE-lined FK bearings for minimum friction and zero maintenance * Not recommended for the casual streetcar use
( 1 )
$660.00
—
$1,532.00
aFe Control PFADT Series Heavy-Duty Sway Bar End Links
Improve your factory end links with aFe Control PFADT Series heavy-duty sway bar end links. These 1/2 in. PTFE-lined rod ends give you quiet operation, and the sets include spacers and Grade 8 hardware. They are direct-fit replacements and are an excellent upgrade for cars with upgraded sway bars. aFe knows the correlation between good looks and great function is the best approach to high performance driving. Make an upgrade to your ride with aFe Control PFADT Series heavy-duty sway bar end links.
( 5 )
$274.00
aFe Momentum Pro Dry S Air Intake Systems
The aFe Momentum Pro Dry S air intake systems boost horsepower and torque, improve throttle response, and sound, offering excellent filtration with oil-free synthetic media for easy maintenance. That makes them ideal for daily drivers and light off-roading due to their convenient, reusable filter and sealed housing that ensures cooler, cleaner air intake for performance. Featuring a high-quality construction, the aFe Momentum Pro Dry S air intake systems have durable, custom-designed tubing and a sealed housing for a perfect fit and protection. The Pro Dry S filter uses three layers of synthetic media, providing great filtration efficiency without needing oil, which is perfect for dusty conditions. Being oil-free, the filter is hassle-free to clean and service, reducing upkeep compared to oiled filters. A little cold forced air goes a long way. Give your engine more power with one of these Momentum Pro Dry S air intake systems from aFe. Order the model for your application needs.
( 3 )
$462.00
—
$500.00
aFe Momentum GT Pro 5R Air Intake Systems
The next generation of air intakes is here! aFe Momentum GT Pro 5R air intake systems use the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. Their one-piece sealed housing with an auxiliary air scoop is designed to eliminate the use of multiple housings and ensure the coolest air intake charge available. A urethane plug is also included for those cold-weather applications where you want to block off the auxiliary air scoop. These systems feature premium stainless steel T-bolt clamps and a 2-ply, reinforced silicone coupler at the throttle body for increased strength and durability. They also include a 5-layer washable and reusable Pro 5R air filter. Experience maximum horsepower gains, huge low-end towing power, increased torque, and a throaty, mean growl for your performance machine with the Momentum GT Pro 5R air intake systems from aFe.
( 100 )
$374.32
—
$420.00
aFe Johnny O'Connell Sway Bars
These sway bars were tuned by Corvette racer Johnny O'Connell himself for aFe Suspension, combining his professional driving skills and the engineering expertise of aFe. These kits include a CNC-bent, 4130 chromoly 35MM front bar and a 3-way adjustable rear bar in Johnny O's signature yellow. Also included are polyurethane bushings, heavy-duty 1/2 in. rod end links, and articulation spacers. To improve your car, you don't have to be a race car driver. Optimize your Vette's handling with added control and smoother, faster cornering. Sway bars from aFe will have you running just as masterfully at the track as they will around town.
( 8 )
$938.00
aFe Control Leveling Kits
aFe Control leveling kits are made from 6061 billet aluminum and provide a lift in the front for better off-road performance while also eliminating the "nose-down rake" notorious on stock trucks. Choose the set to fit your specific application. Features: * High-quality hardware for strength and durability * Red anodized finish for great looks * Increases front ground clearance * Easy bolt-on installation, requires no modifications, can be done at home with the proper tools and safety precautions * Installing these spacers does not require disassembly of the strut/spring
( 7 )
$116.00
aFe Momentum GT Pro Dry S Air Intake Systems
The next generation of air intakes is here! aFe Momentum GT Pro Dry S air intake systems use the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. Features and benefits of aFe Momentum GT Pro Dry S air intake systems include: * Custom, CAD-designed, roto-molded housing made from heat soak-resistant material--eliminates multiple components and ensures the coolest air intake charge possible * A large, clear sight window allows for filter inspection without removal of the air box * High-quality plastic, dyno-tuned intake tube for maximum power gains * Designed around the largest filter possible to allow optimum performance and filtration * Pro Dry S performance air filter features 3-layer, progressively finer porosity synthetic media--with a 100 percent polyurethane frame for long life and multiple cleaning cycles
( 65 )
$410.00
—
$462.00
aFe Control PFADT Series Sway Bars
Even if you spend more time on the streets than on the track, aFe Control PFADT Series sway bars will give your suspension the corner-taking confidence of its race-bred brothers. Enjoying a little spirited driving can be a game-changer with the direct-fit installation of these CNC-bent, lightweight tubular alloy steel sway bars. The kits include CNC-machined aluminum brackets, durable welded bar ends, and polyurethane bushings to keep everything in place. You will have increased stiffness, as well as traction control and balance.
( 2 )
$897.00
aFe Control Suspension Logic ESD Kits
aFe Control suspension logic ESD kits contain simple plug-and-play modules that eliminate the suspension control check engine light. This allows installation of aftermarket shocks or coilovers on vehicles previously equipped with electronic shock absorbers. ESD (electronic shock delete) kits are sold in sets of four, one for each shock, and feature anodized extruded aluminum heat sinks, abrasion-resistant braided wiring shields, and GM-style Metri-Pack connectors.
( 1 )
$370.00
—
$435.00
aFe Scorcher High-Performance Ignition Coils
aFe Power offers Scorcher high performance ignition coils for a wide range of cars, trucks, and vans—including models by Chrysler, Dodge, Jeep, Ram, BMW, Cadillac, Chevrolet, GMC, Ford, Lincoln, Lexus, Scion, Toyota, Audi and Volkswagen from 2000 and up. These premium coils are a direct replacement upgrade over your stock originals. They feature a lower primary resistance than factory coils, resulting in a high energy spark that ensures complete combustion from idle to redline. Scorcher ignition coils keep pace with the demands of higher RPM ranges and at wide-open throttle, always delivering the peak performance you expect. Order the model recommended for your vehicle. Additional details: * Up to 20 percent more spark energy * Increase horsepower and torque * Improved drivability and smoother idle * Easier cold starts * Longer coil life * Available individually or in a set of 4, 6, or 8
( 3 )
$74.00
—
$533.00
aFe Apollo GT Muffler Delete Pipes
Apollo GT Series muffler delete pipes are constructed of mandrel-bent 409 stainless steel tubing for maximum strength and durability. Utilizing state-of-the-art computer-aided design technology, these muffler deletes are designed for custom, high-tolerance factory fitment. The free-flowing tubing replaces the stock muffler producing a deeper, more powerful sound.
( 45 )
$144.00
—
$155.00
aFe BladeRunner Exhaust Manifolds
BladeRunner exhaust manifolds from aFe are made from 304 stainless steel and feature a one-piece design with reinforced ribs between each exhaust port. This increases strength and eliminates the cracking found in most stock and aftermarket units. These manifolds feature two EGT probe ports, a thick wall design for increased strength, matched ports, and a merged runner design to maximize exhaust flow. Once you've installed a BladeRunner on your ride, you'll be able to feel improved turbo spool-up times, throttle response, and decreased EGTs. For top performance, choose an exhaust manifold from aFe.
( 5 )
$689.00
aFe Track Series Carbon Fiber Pro 5R Air Intake Systems
aFe Track Series carbon fiber Pro 5R air intake systems are open-element designs displaying massive air filters and carbon fiber intake tubes. Laid out to fit each specific make and model available, the systems outflow factory intakes, deliver a more aggressive sound, and add plenty of style for under your hood. aFe Track Series carbon fiber systems may feature: * Lightweight high-gloss, clearcoated 100 percent twill weave carbon fiber tubes * Large pre-oiled Pro 5R 5-layer washable/reusable high performance air filter * Stainless steel clamps, silicone couplers, and hardware * Housings made from XLPE (cross-linked polyethylene) polymer minimize warm engine air for maximum performance * Aluminum heat shields are one-piece, lightweight, and powdercoated black—block performance-robbing engine heat * Unique (patent-pending) filter-to-housing interface using fewer parts than traditional systems for a hassle-free installation
( 4 )
$773.00
—
$796.00
aFe Control PFADT Series Engine Mount Sets
Upgrade your Corvette today with aFe Control PFADT Series engine mount sets—and see how much performance you've been missing! These engine mount sets are designed to replace the OE mounts with aFe upgraded polyurethane bushings, thus, improving vehicle launches, traction, and overall improvement in drivetrain feel. The engine mount sets consist of the following components, such as CNC-machined 6061 anodized mounts mated to nickel plated engine brackets via replaceable, quality polyurethane bushings, stainless steel positioning pins, and quality-grade hardware to help you to facilitate your upgrade—from start to finish!
( 2 )
$435.00
aFe Momentum HD Pro Dry S Air Intake Systems
The aFe Momentum HD Pro Dry S air intake systems are designed to give your Cummins, Power Stroke, or Duramax the air it demands. All Momentum HD systems are application-specific, dyno-tested, and tuned to provide maximum horsepower and torque. These Momentum HDs are designed around massive Pro Dry S performance 360-degree, radial-flow air filter with 3-layers of progressive synthetic media providing 99.2 percent cumulative efficiency. Their unique, patent pending, air filter-to-housing interface allows for maximum filter size to increase the available air volume while simplifying the installation process. The air filter is wrapped in reinforced metal providing maximum strength to prevent filter collapse. For those seeking easy performance upgrades for daily driving and occasional spirited runs, aFe HD Pro Dry S air intake systems are a perfect blend of power and performance, without compromising style. Features and benefits include: * Larger filter—more capacity * One-piece sealed housing uses factory mounting points for hassle-free installation * Large, clear sight window for hassle-free filter inspection and aggressive style * High-quality, CAD-designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit * Premium clamps and a silicone elbow coupling for flexibility and secure installation * Most systems are available with an auxiliary air scoop (sold separately) * Urethane plug included to block off the auxiliary air inlet and completely seal the air box * Ideal for extreme performance without compromising style
( 2 )
$435.00
aFe Pro 5R Air Filter Elements
With a polyurethane top and bottom construction, these high flow aFe Pro 5R air filter elements outperform stock paper filters. The multiple layers of progressively finer mesh cotton gauze in many of the aFe Pro 5R air filter elements give a whole new meaning to incredible airflow, providing incredible dust-holding capacity. They are also washable and reusable, making them a cost-efficient choice vs. stock paper filters. The aFe Pro 5R air filter elements are available in a variety of sizes and styles, which makes them a great choice for daily drivers who want to improve performance without sacrificing filtration. These air filter elements are also suitable for both street and track use where maximizing performance is a main priority.
( 80 )
$56.00
—
$107.00
aFe Silver Bullet Throttle Body Spacers
Designed to deliver more horsepower and torque, aFe Silver Bullet throttle body spacers make an excellent addition to your vehicle. They're precision-machined from T-6061 billet aluminum to exacting specifications to provide optimal performance. The combination serrated/helix design creates turbulence so that the air/fuel charge is thoroughly mixed for a complete burn. Their specially-designed serrated edge will reduce the whistling sound normally associated with throttle body spacers. The aFe Silver Bullet throttle body spacers increase the volume between the throttle and cylinder, improving volumetric efficiency.
( 90 )
$139.00
—
$160.00
aFe BladeRunner Intercooler Pipes
The aFe BladeRunner intercooler pipes are engineered to improve turbocharged engine performance by replacing restrictive factory pipes with larger, mandrel-bent aluminum or stainless steel tubes to withstand higher boost pressures and temps better than factory rubber/plastic, preventing leaks. Key benefits include enhanced durability with high-quality construction, leak-free connections using O-rings and T-bolt clamps, and potential for extra features like NPT ports for sensors or water/methanol injection. BladeRunner pipes are available for these positions: turbocharger-to-intercooler, intercooler-to-intake, and the complete system and comes with the necessary hardware needed for installation. Powdercoated finish protects pipes from the elements. Don't let your factory plumbing rob your diesel of power—upgrade with aFe BladeRunner intercooler pipes! Choose the model for your application.
( 19 )
$268.00
—
$689.00
aFe Magnum FLOW Pro DRY S Air Filters
aFe Magnum FLOW Pro DRY S air filters are available for a wide range of vehicles. They feature three layers of oil-free synthetic media, making them a very easy-to-maintain performance air filter. With a progressive bump seal design and polyurethane frame, they're also extremely durable and simple to install. * Washable and reusable for multiple cleaning cycles: Pro DRY S filter media features three layers of progressive synthetic (Dry) media for maximum convenience. Deep, open pleats allow for increased surface area, flow, and dust holding capacity. * Pro DRY S filter media: This media is best suited for street use. Pro DRY S filters are easily recharged with aFe's Power Cleaner. * Rounded deep open pleats: aFe Power performance air filters use a rounded, evenly spaced pleat design which allows for more usable filter surface area, providing increased flow and greater dust holding capacity. * Progressive bump seal: This pliable sealing surface conforms to even the most uneven filter housing, making for a perfect filter fit and sealing surface every time. This design eliminates the use of gaskets or sealants and always goes back to its original form. * Full polyurethane frame: All aFe Power flat panel performance air filters are constructed with a full 360-degree polyurethane frame. Unlike other materials that degrade after repeated heat cycles in an engine bay, polyurethane maintains its original molded shape.
( 2 )
$97.00
aFe Pro GUARD D2 Fuel Filters
Pro GUARD D2 fuel filters from aFe are designed to keep dirt, rust, and other contaminants from getting into your diesel engine. The direct fit filters and elements provide excellent filtration performance, compatibility, and durability to maintain clean fuel flow to your engine. Pro GUARD D2s are the best diesel-grade filters available, thoroughly tested to meet your expectations for flow management and function. Ensure absolute engine protection with aFe!
( 21 )
$26.00
—
$52.00
