Availability
Aeromotive A2000 drag race fuel pumps deliver 350 gph of fuel at free flow—enough for engines between 500 and 2,000 hp. They use a diaphragm-controlled regulator for even, reliable flow without sudden pressure spikes. The results are more consistent ETs and better overall performance. Compatible with gasoline and alcohol, the pumps feature a diaphragm bypass, -10 AN inlet and outlet ports, a -8 AN return port, a 1/8 in. NPT gauge port, and a proprietary shaft seal design.
( 10 )
$544.99
Aeromotive Phantom 340 Stealth fuel systems include all the main components (including the highly sought, baffled Phantom 340 fuel pump) required to create a proper carbureted return-style or EFI fuel system for vehicles with OEM-style fuel tanks. They add a whisper-quiet internal pump to your stock tank that can deliver enough liquid energy to feed your high-performance street rod or muscle car, even in tanks as shallow as six inches! These systems provide a universal high-flow pre-pump filter and modular design that allows fitment to almost any fuel tank. Make the stealthy switch to Aeromotive Phantom 340 Stealth fuel systems and take advantage of modern technology in your classic ride! More product features, items, and specifications include: * Supports up to 700 horsepower on forced induction EFI setups and up to 850 horsepower on naturally aspirated EFI setups * Supports up to 860 horsepower on forced induction carbureted setups and up to 1,000 horsepower on naturally aspirated carbureted setups * Requires AN-06 fuel hose and hose ends for proper installation of fuel return/supply lines (all sold separately) * Black anodized hanger assembly and fuel-resistant baffle/basket (with foam and bladder) * Phantom 340 fuel pump (18688) * Fuel pump strainer * Retainer C-ring with studs * Gasket (1/2 in. thick) * Installation ring * Drill bit (No.2; 0.221 in. diameter) * Ring terminals and caps (2 each) * Hose clamp (1 each) and pump clamps (2 each) * Nylon-locking stainless steel No.10-24 nuts (10 each) * Locking No.10 nylon washers (10 each) * Machine screws - No.10-24 x 2 1/2 in. (2 each) * Foam spacer (1.0 in. wide x 1/2 in. thick) * Must be used with a return style fuel system * Designed for in-tank use only * Recommended tools include a 3 1/4 in. hole saw drill for metal, flathead screwdriver, 3/8 in. socket and ratchet, tape measure, and bread knife or hacksaw blade
( 41 )
$714.55
Aeromotive continuous duty Eliminator fuel pumps support big horsepower and maintain the driveability necessary for a true high performance street car. Designed for high horsepower street/strip applications, EFI, or carbureted, they feature Aeromotive's "dual chamber" pumping mechanism. The pumps are available in external or in-tank models. Additional features include: * -12 AN O-ring boss inlet port and -10 AN O-ring boss outlet port * Fully submersible for custom in-tank pump placement * 25 percent more flow at pressure than Aeromotive A1000 fuel pump * Supports naturally aspirated EFI engines up to 1,900 hp * Supports forced air induction EFI engines up to 1,400 hp * Supports naturally aspirated carbureted engines up to 2,300 hp * Supports forced air induction carbureted engines up to 1,700 hp
( 2 )
$687.99
No. 1 on land and now on water--Aeromotive A1000 marine fuel pumps. They are built to offer your watercraft rugged reliability to keep you skimming across the water. The A1000 fuel pumps can flow big volumes--carbureted or EFI--with the durability to run for over 2,000 hours continuously. They are certified to ISO 8846, SAE J1171, and United States Coast Guard requirements for ignition protection and fire resistance. Add one of the toughest, most versatile, and powerful fuel pumps offered to the marine industry--Aeromotive A1000s. Other features: * Compatible with all pump and racing gasoline and high grade diesel fuels * Up to 1500 hp--carbureted engine naturally aspirated * Up to 1200 hp--carbureted engine forced air induction * Up to 1300 hp--fuel injected engine naturally aspirated * Up to 1000 hp--fuel injected engine forced air induction
( 2 )
$615.87
Aeromotive VaporWorx BoostWorx returnless PWM kits for ZL1 fuel pump modules have everything needed to provide a standalone, OE-type returnless fuel system with constant or manifold referenced fuel pressure. When used with the popular and affordable GM Gen5 ZL1 Camaro, C7 Corvette, Aeromotive Super ZL1, and many other GM-compatible fuel pump modules, these systems will provide constant pressure or any base pressure with a 1:1 manifold referenced (supplied MAP sensor based) fuel pressure—operating like a mechanical fuel pressure regulator would with the ECM calibrated in the same manner. The simplicity of these kits comes with connecting the supplied standalone MAP sensor to the pressurized side of the intake manifold, just like connecting a boost gauge or manifold referenced fuel pressure regulator. For constant fuel pressure simply leave the MAP sensor portion of the kit disconnected. BoostWorx ZL1 controllers feature: * Everything needed electrically to drive the fuel pump module--no relays, external regulators, or return lines are required * Unmatched low fuel level capability * Up to a 2/3 reduction in power to the fuel module during idle and cruise vs. traditional systems * 40-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset * Short circuit protection that will operate indefinitely without damage * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies * All cross-linked polyethylene wiring * UL94 rated components used throughout * Integrates into the OE ECM to allow all safety systems to remain functional * 10 to 22 V operating capacity -- Can be used with voltage boosters -- Lower than 10 V applied to the turn on circuit will cause controller shutdown to protect from an AFR lean condition * Billet aluminum VaporWorx MAP sensor bracket and 3bar pressure sensor
( 1 )
$525.15
—
$577.15
Aeromotive Phantom 200 Stealth fuel systems include all the main components (including the highly sought, baffled Phantom 200 fuel pump) required to create a proper carbureted return-style or EFI fuel system for vehicles with OEM-style fuel tanks. They add a whisper-quiet internal pump to your stock tank that can deliver enough liquid energy to feed your high-performance street rod or muscle car, even in tanks as shallow as six inches! These systems provide a universal high-flow pre-pump filter and modular design that allows fitment to almost any fuel tank. Make the stealthy switch to Aeromotive Phantom 200 Stealth fuel systems and take advantage of modern technology in your classic ride! More product features, items, and specifications include: * Supports up to 450 horsepower on forced induction EFI setups and up to 600 horsepower on naturally aspirated EFI setups * Supports up to 600 horsepower on forced induction carbureted setups and up to 750 horsepower on naturally aspirated carbureted setups * Requires AN-06 fuel hose and hose ends for proper installation of fuel return/supply lines (all sold separately) * Black anodized hanger assembly and fuel-resistant baffle/basket (with foam and bladder) * Phantom 200 fuel pump (18689) * Fuel pump strainer * Retainer C-ring with studs * Gasket (1/2 in. thick) * Installation ring * Drill bit (No.2; 0.221 in. diameter) * Ring terminals and caps (2 each) * Hose clamp (1 each) and pump clamps (2 each) * Nylon-locking stainless steel No.10-24 nuts (10 each) * Locking No.10 nylon washers (10 each) * Machine screws - No.10-24 x 2 1/2 in. (2 each) * Foam spacer (1.0 in. wide x 1/2 in. thick) * Must be used with a return style fuel system * Designed for in-tank use only * Recommended tools include a 3 1/4 in. hole saw drill for metal, flathead screwdriver, 3/8 in. socket and ratchet, tape measure, and bread knife or hacksaw blade
( 27 )
$514.90
Using all OEM components, Aeromotive VaporWorx Super fuel modules are drop-in units (for specific applications) that excel above 65 psi and perform well at elevated voltage levels. Super fuel modules are compatible with GM FSCM/returnless systems, as well as the VaporWorx standalone PWM returnless controller—no modifications should be needed. Aeromotive VaporWorx Super fuel modules include a new fuel level sensor—40 ohms full/250 ohms empty.
Not Yet Reviewed
$770.25
Aeromotive Gen II Stealth fuel tanks utilize patented and award-winning Phantom technology. This enables a quiet, high-flow EFI pump and baffle to maintain ample fuel supply around the inlet of the pump—which, in turn, ensures consistent fuel delivery and drivability even in low fuel conditions. The tanks feature outlet and return ports, along with electrical terminals positioned in the OEM location. This design enables flush installation to the vehicle floor and will not require strap modification or spacers. All Gen II Stealth tanks come out of the box completely assembled. The fuel pump, fuel level sending unit, and fuel/electrical bulkhead are pre-installed. As a true plug-and-play assembly, an Aeromotive Gen II Stealth tank will get you out of the garage and on the road in no time. Order the model recommended for fitment on your vehicle.
( 68 )
$669.45
—
$799.95
Aeromotive A1000 brushless in-line fuel pumps let you upgrade to a premium unit for faster, more dependable and uninterrupted fuel delivery--with less power consumption and potential for wear or failure. Utilizing the latest brushless motor technology, these pumps are built for sustained pressure (up to 90 psi with Signature models), featuring a bedrock-solid roller vane design that primes easily, reduces friction, and improves efficiency. Producing more torque per watt and a higher torque-to-weight ratio, brushless motors deliver less noise, lighter weight, and more reliability. With a higher level of efficiency (down to fractions of a second in design speed control) Aeromotive A1000 brushless fuel pumps provide precise control of fuel pump RPM as pressure rises—better maintaining operation and flow, while producing a flatter flow curve. These tight tolerances result in less current draw, less heat, and extended life. More product features, items, and specifications include: * Extended service life in ethanol and methanol * Integral, external brushless controller for clean installation, cooler fuel, and enhanced reliability * Inlet and outlet ORB-10 ports * Requires straight 12 VDC to 16 VDC power supply (16 V charge systems require voltage regulator or step-down to 12 V) * Not compatible with pulse modulated systems or fuel pump speed controllers * Includes two stainless steel T-bolt clamps (12703) for mounting * Rated flow of 700 lbs./hr. at 45 psi, 13.5 volts for EFI engines * Rated flow of 900 lbs./hr. at 9 psi, 13.5 volts for carbureted engines * Fuel Injected gas engines rated up to 1,300 HP (naturally aspirated) and up to 1,000 HP (forced air induction) * Carbureted gas engines rated up to 1,500 HP (naturally aspirated) and up to 1,200 HP (forced air induction) * Fuel Injected E85 engines rated up to 910 HP (naturally aspirated) and up to 700 HP (forced air induction) * Carbureted E85 engines rated up to 1,050 HP (naturally aspirated) and up to 840 HP (forced air induction) * Ideal for blow-through carbureted engines up to 1,200 HP
( 1 )
$714.99
Aeromotive 1988-97 Chevy Truck Dual 340 in-tank fuel pump modules are direct drop-in units for the specified years of GM 1500/2500 V8 trucks. Featuring dual 340 lph pumps, they can support up to 1,400 FWHP on gas/fuel injection/forced induction and up to 980 FWHP on E-85/fuel injection/forced induction. 100 micron pump pre-filters are included. Additional features: * No drilling required for installation * Individual wiring terminals for each pump to accommodate a staged system * Single -08 ORB outlet port for easy plumbing * Outlet, return, and vent ports include -08 90-degree swivel fittings * Vent port adapter fitting * 0-90 Ohm fuel level sender
Not Yet Reviewed
$725.70
Aeromotive VaporWorx ReturnX return-type PWM controllers have everything needed to provide a standalone fuel pump speed control system. Available for single or dual pump, naturally aspirated or supercharged applications, no switches, relays, or Hobb's switches are needed when using these ReturnX systems. Controllers have primary and secondary output with the primary providing sufficient pump speed to maintain fuel pressure during idle/cruise while the secondary pump follows at a lower duty cycle. This leader/follower arrangement delivers a smooth ramp-up in pump speed until both pumps are at full output. For carbureted and EFI applications, simply attach the supplied standalone MAP sensor hose to a manifold vacuum source (naturally aspirated) or past the supercharger/turbocharger and make at-idle controller adjustments--the VaporWorx controller will do the rest. Select the single or dual naturally aspirated or supercharged version needed for your setup. Key features: * Works with all brushed-type fuel pumps * Typical power reduction to the pump(s) of 45 to 75 percent * Standalone MAP-based fuel pump speed control * Carburetor and EFI capability Benefits: * Everything needed electrically to drive the fuel pump(s) * A significant reduction in the average fuel pump power requirement resulting in lower fuel temperatures and longer pump life * 40 to 80-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset will operate indefinitely without damage * Short circuit output protection will operate indefinitely without damage * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies * All cross-linked polyethylene wiring * UL94 rated components used throughout * Integrates into the OE ECM to allow all safety systems to remain functional * 10 to 22 V operating range -- Can be used with voltage boosters -- Lower than 10 V applied to the turn-on circuit will cause controller shutdown to protect from an AFR lean condition
( 1 )
$502.90
—
$630.20
Aeromotive EFI Returnless Phantom in-tank fuel pumps feature the same simple, fabrication-free installation of the return-style Phantom kits—but you just run one -06 AN supply line through the high-flow filter to the engine, connect a proper power supply to the pump and bang, you're done! EFI returnless Phantom in-tank fuel pumps support up to 600 fwhp naturally aspirated and up to 450 fwhp forced induction on gasoline. Reduce fwhp limit by 30 percent for E85 fuel. These pumps utilize a turbine pumping mechanism that can be pulse modulated, as well as ORB-06 outlet/vent ports.
Not Yet Reviewed
$615.41
Aeromotive VaporWorx BoostWorx returnless PWM controllers for dual fuel pump applications have everything needed to provide a standalone, OE-type returnless fuel system. They provide a 1:1 manifold referenced fuel pressure using the VaporWorx supplied standalone MAP sensor and mounting bracket, acting just like a mechanical fuel pressure regulator would with the ECM tuned in the same manner. BoostWorx PWM dual-pump controllers feature: * Everything needed electrically to drive the fuel pump module--no relays or Hobb's switches are required * Up to a 2/3 reduction in power to the fuel module during idle and cruise vs. traditional systems * 80-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset * Short circuit protection with automatic reset * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies, where appropriate * All cross-linked polyethylene wiring * UL94 rated components used throughout * Integrates into the OE ECM to allow all safety systems to remain functional * 10 to 22 V operating capacity -- Can be used with voltage boosters -- Lower than 10 V applied to the turn on circuit will cause controller shutdown to protect from an AFR lean condition * Billet aluminum VaporWorx MAP sensor bracket and 3bar pressure sensor * Second pump turn-on set to 4 psi * The PWM controller supports Aeromotive's line of 340 lph in-tank pump
Not Yet Reviewed
$683.25
Aeromotive Phantom direct-fit fuel pumps are drop-in systems engineered for your late model truck. They're available in five pump sizes, from single 340 lph to triple 450 lph. Designed to work with plastic fuel tanks, Phantom Series pumps cover a range of GM truck models spanning decades. The 1999-2004 models used a smaller factory fuel sending unit than the later 2005-17 models. The smaller size unit limits the pump configurations that this tank will accommodate. Aeromotive Phantom direct-fit fuel pump systems are also compatible with different tank depths.
( 2 )
$610.45
—
$755.49
Aeromotive dual-action adjustable fuel logs incorporate new features previously unavailable. Each carburetor inlet uses a ball and socket assembly that swivels 20 degrees, allowing additional clearance for throttle stops, throttle linkage, and other accessories. They offer a healthy inlet that can feed high-horsepower engines and feature manufacturing from quality materials and a strong finish, providing durability and great looks. They also provide dual NPT ports (machined in) that allow you to install fuel pressure gauges or pressure transducers. Set a new standard for your ride with the Aeromotive dual-action adjustable fuel logs quality-engineered to fit!
( 4 )
$780.18
Aeromotive Phantom Flex fuel systems go green for high octane performance! Okay, you want to switch to EFI or drop in that late model motor. Question: What do you do for a tank? Answer: Phantom from Aeromotive. Problem: You want to run E85. Solution: Phantom Flex fuel systems. Now you can make the switch without welding in sump pumps, without losing your trunk space, and without the common fuel handling issues. They allow you to put a fuel pump inside your factory tank capable of supporting big horsepower EFI or carbureted. And it's whisper quiet! Plus, the Flex lets you choose renewable energy (even with its problems--corrosive nature and stoichiometric ratio) E85 is no match for the sealed electrical connections and powerful 450 pump. The quiet, powerful, feel-good-choice for your swap--Aeromotive Phantom Flex fuel systems. Features include: * 450 Stealth fuel pump * Gas-Supports 800 horsepower EFI forced induction, 1,100 horsepower EFI naturally aspirated * Gas-Supports 950 horsepower carbureted forced induction, 1,300 horsepower carbureted naturally aspirated * E85-Supports 550 horsepower EFI forced induction, 750 horsepower EFI naturally aspirated * E85-Supports 700 horsepower carbureted forced induction, 900 horsepower carbureted naturally aspirated * Black anodized top hat * 3-ORB-06 ports--supply, return, vent * Large capacity fuel-resistant baffle/basket * Foam and bladder * Universal high flow pre-pump filter * Modular design allows fitment to almost any fuel tank * Turbine pump mechanism increases durability * In tank use only
( 3 )
$693.59
Aeromotive electric in-tank fuel pumps are replacement elements for your 6.5, 15, and 20 gallon fuel cell kits. These quality pumps are direct replacements for the original pieces in your Aeromotive fuel system. They're available with or without a filter. Goin' in-tank is great! Aeromotive replacement electric in-tank fuel pumps keep the fuel pumpin'.
Not Yet Reviewed
$624.90
—
$702.90
Aeromotive A1000 Stealth fuel pump assemblies provide multiple mounting options in almost any fuel cell or tank. Designed for the custom tank builder or fabricator, these assemblies use O-ring clamps to positively seal the provided tube to both the filter pickup and the pump inlet, allowing for perfect placement of the pickup to ensure superior performance! Aeromotive A1000 Stealth fuel pump assemblies are constructed for cool and quiet operation. They feature a 100 micron stainless steel fuel filter, pickup, gaskets, a mounting ring, bolts, and washers for an easy installation.
( 2 )
$714.55
Aeromotive's all-new returnless EFI Phantom 200 is a cost-effective way to fuel a late model EFI engine swapped into an early, carbureted muscle car or truck. For those who want an in-tank, baffled fuel pump—but they don't want to run an external regulator with a return line—the Phantom EFI returnless in-tank pump is your solution. These systems featuring the same simple, fabrication-free installation of the return-style Phantom kits; but you simply run one AN -06 supply line through an Aeromotive high-flow filter to the engine, connect a proper power supply to the pump … and you're done! These fuel systems support up to 600 fwhp naturally aspirated and up to 450 fwhp forced induction EFI on gasoline. They are not E85 compatible. NOTE: This product is not legal for sale or use on emission-controlled vehicles, except when used as a direct replacement part matching OEM specifications. System details: * Billet top hat with ORB-06 ports * 55-60 psi internal bypass valve for return-less installations * Foam baffle and bladder sump * Proprietary sealing gasket * Installation ring * High-flow pre-pump filter * Billet C-ring mount * Height adjustable 6-11 in. * ORB-06 port plug
Not Yet Reviewed
$658.30
Aeromotive VaporWorx Ally PWM fuel pump controller kits allow a second pump to be added to an OEM fuel system control module without causing overloading of the stock FSCM. They are compatible for use with positive trigger OEM fuel system control modules when using an aftermarket standalone fuel pump. For clarity, there are many names for the modern OEM fuel pump driver/fuel computer, but all basically do the same thing; communicate with the ECM to drive the fuel pumps at the speed needed to provide the requested fuel pressure. Most aftermarket ECMs do not have this capability and unfortunately, many OEM fuel system control modules (FSCM) can handle one high-power pump, but not two or more. So, in the search for more power, and to keep the FSCM working, it needs help. That's where VaporWorx Ally PWM fuel pump controller kits come in. These Ally kits allow positive pulse FSCMs to control the primary pump, while the VaporWorx Ally Auto-On controller "piggybacks" and takes care of the other pump(s). The controllers do not turn on the other pumps until approximately 3 to 4psi of boost by using the engine MAP sensor or a VaporWorx standalone MAP sensor as the turn-on trigger. The Ally solution provides sufficient power for all fuel pumps while maintaining the FSCM full CAN feedback and diagnostics, and all pumps will effectively be under the control of the FSCM. Kits are available for naturally aspirated and supercharged applications. Select the kit best suited to your setup. Features: * Everything needed electrically to drive additional fuel pumps -- No hard-to-get connectors, multiple fuses, Hobb's switches, etc. * A 2/3 reduction in power to the fuel pump during idle and cruise vs. traditional systems means long OEM pump life expectancy * 50-amp minimum continuous power rating in a compact controller package * Progressive 2/3 pump ramping strategy lowers the load on the FSCM to reduce MIL codes * Soft-start feature to reduce initial pump-on pressure spikes * Can use either the engine MAP sensor or a VaporWorx standalone MAP sensor * Over-temperature shutdown with automatic reset * Short circuit protection that will operate indefinitely without damage * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies, where appropriate * Cross-linked polyethylene wiring * UL94 rated components used throughout * Allows all the OEM ECM priming and safety systems to remain functional * Can be used with one or two extra/auxiliary pumps * 10 to 22 V operating capacity
Not Yet Reviewed
$577.15
Aeromotive VaporWorx Ally DualX PWM controller kits are compatible with any OEM fuel system control module when using OEM fuel modules with either an OEM Fuel System Control Module (FSCM) or aftermarket ECM pulse driver. They allow the OEM FSCM to control the primary pump while the Ally DualX controller "piggybacks" and takes care of the second. The controller takes its operating commands from the FSCM pulsed wire--no user programming, system changes, or adjustments are needed. In this way, there is sufficient power for all fuel pump modules while maintaining full FSCM CAN feedback and diagnostics. Ally DualX kits perform the following basic functions: * Whenever the primary pump is running, the Ally DualX controller will also be running. This is typically used with OEM fuel pump modules. It is important to have the second fuel pump module running all the time or else it may run dry under some conditions. * Whenever the ECM is providing either a positive or negative pulse, the Ally DualX controller will also be running the primary fuel pump(s). This is typically used with aftermarket ECMs + naked pumps in a mechanically pressure regulated fuel system. Aeromotive VaporWorx Ally DualX PWM controller kits feature: * Everything needed electrically to drive the fuel pump module * Unmatched low fuel level capability when using an OEM fuel module as the second pump * A 1/2 to 2/3 reduction in power to the fuel pump during idle/cruise vs. traditional systems * 40-amp minimum continuous power rating in a compact controller package * Total size 4 in. L x 2.1 in. W x 1 5/8 in. H * Over-temperature shutdown with automatic reset that will operate indefinitely without damage * Short circuit protection with automatic reset that will operate indefinitely without damage * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies where appropriate * All cross-linked polyethylene wiring * UL94 rated components used throughout * 10 to 22 V operating capacity * Can be used with voltage boosters
Not Yet Reviewed
$502.90
Aeromotive VaporWorx BoostWorx PWM controllers for CTS-V LSA applications have everything needed to provide a standalone, OE-type returnless fuel system that meets the GM LSA crate engine fuel pressure requirements. Please note, these kits are intended to be used with the GM LSA ECM and a wiring kit for the LSA engine only. When used with the CTS-V fuel module, these controllers provide the needed manifold referenced (MAP sensor based) fuel pressure that cannot be met with traditional return-type pressure regulators. BoostWorx PWM CTS-V LSA fuel module controllers feature: * Everything needed electrically to drive the fuel pump module -- No relays, external regulators, or return lines needed -- 750 hp capable * Unmatched low fuel level capability when used with an OEM-style fuel module * Calibrated specifically for the LSA crate engine controller * A 50 percent reduction in power to the fuel module during idle and cruise vs. traditional systems * 40-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset * Short circuit protection * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies, where appropriate * All cross-linked polyethylene wiring * Single 20 ft. wiring harness from the controller to the fuel module * UL94 rated components used throughout * Integrates into the OE ECM to allow all safety systems to remain functional * 10 to 22 V operating capacity -- Can be used with voltage boosters -- Lower than 10 V applied to the turn on circuit will cause controller shutdown to protect from an AFR lean condition
Not Yet Reviewed
$502.90
Aeromotive fuel pump and regulator kits support up to 750 hp! You get a continuous-duty street/strip electric inline fuel pump that flows a massive 140 gph at 13.5 V and 14 psi, combined with a performance-matched, adjustable (5 to12 psi) street/strip fuel pressure regulator. To keep tabs on your fuel pressure, you also get a stainless steel 0 to 15 psi fuel pressure gauge. The kits come with your choice of 3/8 in. NPT or -6 AN O-ring boss inlet/outlet ports.
( 5 )
$536.30
Aeromotive offers Stealth 450 in-tank electric fuel pumps for a variety of applications, including Subaru models from the early 2000s and up. Order the pump recommended for your vehicle.
Not Yet Reviewed
$818.55
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
