Availability
On Sale
Aeromotive Stealth electric fuel pumps provide your ride with the fuel it needs to own the road or the track. They feature a compact, lightweight design that will bolt into most existing hanger assemblies, making them an easy upgrade to your fuel system. These versatile components utilize a turbine pumping mechanism that increases durability and allows use in most pulse-modulated applications. Don't settle for lesser fuel pumps; feed your engine with the Aeromotive's Stealth fuel pumps best suited for your application!
( 187 )
$157.00
$141.30
On Sale
Aeromotive Gen II Stealth fuel tanks utilize patented and award-winning Phantom technology. This enables a quiet, high-flow EFI pump and baffle to maintain ample fuel supply around the inlet of the pump—which, in turn, ensures consistent fuel delivery and drivability even in low fuel conditions. The tanks feature outlet and return ports, along with electrical terminals positioned in the OEM location. This design enables flush installation to the vehicle floor and will not require strap modification or spacers. All Gen II Stealth tanks come out of the box completely assembled. The fuel pump, fuel level sending unit, and fuel/electrical bulkhead are pre-installed. As a true plug-and-play assembly, an Aeromotive Gen II Stealth tank will get you out of the garage and on the road in no time. Order the model recommended for fitment on your vehicle.
( 68 )
$669.45
—
$1,280.95
$602.50
—
$1,152.86
On Sale
Stealth 340 pumps are high-output, in-tank, electric fuel pumps for fuel injected and carbureted applications. At a volume rate of 340 liters per hour. These universal pumps bolt into many existing hanger assemblies, and are a direct fit upgrade for many OE applications. These pump will support up to: * 1000 HP (carbureted/naturally aspirated) * 850HP (carbureted/forced induction) * 850HP (EFI/naturally aspirated) * 700HP (EFI/forced induction) * 700HP on E85 (carbureted/naturally aspirated) * 595HP on E85 (carbureted/forced induction) * 595HP on E85 (EFI/naturally aspirated) * 490HP on E85 (EFI/forced induction)
( 17 )
$446.10
—
$502.35
$401.49
—
$452.12
On Sale
Aeromotive VaporWorx KPM1500 fuel pump/returnless PWM control systems include a KPM1500 fuel pump modified with a high-pressure regulator, returnless pulse width modulation control system, and other modifications to make them work properly for most US-based vehicles. The KPM1500 features twin OEM Bosch PWM compatible pumps, fully re-engineered pump support system, robust venturi pump systems, integral safety overpressure valves, and a built-in anti-reversion/check valve, making each fuel pump very much like an OEM part. The outlet nipple has been strengthened to reduce the chances of breakage, and their operation is smooth, quiet, and easy to control. VaporWorx PWM (pulse width modulation) kit contains everything needed to drive the KPM1500 electrically in either constant/static or manifold referenced pressure modes. These kits are intended to be used as standalone control systems. No additional relays, Hobb's switches, etc. are needed. Features: * VaporWorx modified KPM1500 fuel pump module make the OEM chassis wiring plug-and-play * Approximately 71 percent+ reduction in power to the fuel pump during idle/cruise vs. running both pumps full speed all the time. Practically eliminates vapor lock/cavitation caused by overheated fuel * Fully returnless (external inline filter required) * 60-amp minimum continuous power rating in a compact controller package * Total size 4 in. L x 2.1 in. W x 1 5/8 in. H * Over-temperature shutdown with automatic reset operates indefinitely without damage * Short circuit protection that will operate indefinitely without damage * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies (where appropriate)
Not Yet Reviewed
$2,917.70
$2,625.93
On Sale
Aeromotive 1988-97 Chevy Truck Dual 340 in-tank fuel pump modules are direct drop-in units for the specified years of GM 1500/2500 V8 trucks. Featuring dual 340 lph pumps, they can support up to 1,400 FWHP on gas/fuel injection/forced induction and up to 980 FWHP on E-85/fuel injection/forced induction. 100 micron pump pre-filters are included. Additional features: * No drilling required for installation * Individual wiring terminals for each pump to accommodate a staged system * Single -08 ORB outlet port for easy plumbing * Outlet, return, and vent ports include -08 90-degree swivel fittings * Vent port adapter fitting * 0-90 Ohm fuel level sender
( 1 )
$725.70
$653.13
On Sale
Stealth 200 pumps are high-output, in-tank, electric fuel pumps for fuel injected and carbureted applications. At a volume rate of 200 liters per hour. These universal pumps bolt into many existing hanger assemblies, and are a direct fit upgrade for many OE applications. These pump will support up to: Fuel Injected Engines * Gasoline up to 600hp – Naturally Aspirated * Gasoline up to 450hp – Forced Induction Carbureted Engines * Gasoline up to 750hp – Naturally Aspirated * Gasoline up to 600hp – Forced Induction
( 2 )
$390.95
—
$446.10
$351.86
—
$401.49
On Sale
Using all OEM components, Aeromotive VaporWorx Super fuel modules are drop-in units (for specific applications) that excel above 65 psi and perform well at elevated voltage levels. Super fuel modules are compatible with GM FSCM/returnless systems, as well as the VaporWorx standalone PWM returnless controller—no modifications should be needed. Aeromotive VaporWorx Super fuel modules include a new fuel level sensor—40 ohms full/250 ohms empty.
Not Yet Reviewed
$770.25
$693.22
On Sale
Aeromotive Phantom direct-fit fuel pumps are drop-in systems engineered for your late model truck. They're available in five pump sizes, from single 340 lph to triple 450 lph. Designed to work with plastic fuel tanks, Phantom Series pumps cover a range of GM truck models spanning decades. The 1999-2004 models used a smaller factory fuel sending unit than the later 2005-17 models. The smaller size unit limits the pump configurations that this tank will accommodate. Aeromotive Phantom direct-fit fuel pump systems are also compatible with different tank depths.
( 2 )
$518.80
—
$1,439.20
$466.92
—
$1,295.28
On Sale
Aeromotive 340 Stealth fuel tanks conceal impressive power components. Hiding inside the tank is the high-output electric fuel pump mounted to a quality material hanger assembly and boasting an impressive 340 lph flow! They also feature an innovative baffling/tray system to control fuel slosh and keep the fuel pump submerged. Their design provides superior EFI street performance with OEM fitment while also supporting daily driving down to very low levels of fuel in the tank. Order the Aeromotive 340 Stealth fuel tank best suited to match your vehicle's specifications for enhanced fuel storage and delivery!
( 43 )
$1,093.85
—
$1,227.00
$984.46
—
$1,104.30
On Sale
Ensure peak performance from your muscle or sports car with an Aeromotive vacuum/boost reference fuel pressure regulator, designed for use with GM LT1 engines. Developed with LT1 specs in mind, these are true billet, fully adjustable regulators—featuring CNC-machined aluminum seats, ports, and stainless steel springs, custom-designed for precise fuel control. Order the model recommended for your vehicle.
( 13 )
$279.55
$251.60
On Sale
Aeromotive billet fuel rails are built for maximum fuel flow and ease of installation. They deliver optimal injector supply with minimal hydraulic fluctuation and will feed up to 3,000 hungry horses. The fuel rails feature ORB-08 ports with compact connections and positive leak-free sealing. Full-size ports at the end of the rails insure proper fuel flow. Additional inlet and outlet ports are provided where required for plumbing convenience. Steel mounting brackets are custom engineered for each application, combining a solid durable mounting platform that ensures a correct fit. Aeromotive fuel rails are CNC-machined and include a great looking anodized finish. Order the kit recommended for your vehicle.
( 14 )
$380.35
—
$1,573.45
$342.32
—
$1,416.10
On Sale
Aeromotive A1000 Camaro Stealth fuel systems assign your modern muscle to a covert operation of high performance! The complete single fuel pump assemblies are capable of supporting big horsepower, and they drop right in to your factory tank. Featuring an A1000 fuel pump, these systems include an integral 100-micron stainless steel pre-pump filter, an ORB-08 return line port, installation hardware, and in-depth instructions. No guesswork or modifying is necessary—and with a simple regulator change, these systems can go from low-horsepower carbureted to supercharged/turbocharged applications. An Aeromotive A1000 Stealth fuel system is the last pump you'll ever need for your Camaro. Go undercover with a bolt-on, high performance solution that saves you time and money—Aeromotive A1000 Camaro Stealth fuel systems.
( 1 )
$1,082.70
$974.43
On Sale
Looking for remote mounting brackets for modern 3-wire Bosch sensors used in GM LS engines? Aeromotive VaporWorx MAP sensor mounting bracket/blocks can be your solution. Compact and rugged, these kits come with everything needed to remote mount your sensor, including the electrical plug and components. They are ideal for mounting the Bosch-style 3-wire MAP sensor and for dynamometer operators looking for a simple to use and adapt system. Features and contents: * 6061 Type III hard coat anodized aluminum * 3-pin plug, terminals, and seals * Brass barb fitting for 1/8 in. hose x 1/8 in. NPT thread * Sufficient clearance to use larger hoses or AN fittings for vacuum line * MAP sensor hold-down screw * Stainless steel mounting screws * Four feet of vacuum hose
( 1 )
$64.70
$58.23
On Sale
Aeromotive VaporWorx BoostWorx PWM controllers for CTS-V LSA applications have everything needed to provide a standalone, OE-type returnless fuel system that meets the GM LSA crate engine fuel pressure requirements. Please note, these kits are intended to be used with the GM LSA ECM and a wiring kit for the LSA engine only. When used with the CTS-V fuel module, these controllers provide the needed manifold referenced (MAP sensor based) fuel pressure that cannot be met with traditional return-type pressure regulators. BoostWorx PWM CTS-V LSA fuel module controllers feature: * Everything needed electrically to drive the fuel pump module -- No relays, external regulators, or return lines needed -- 750 hp capable * Unmatched low fuel level capability when used with an OEM-style fuel module * Calibrated specifically for the LSA crate engine controller * A 50 percent reduction in power to the fuel module during idle and cruise vs. traditional systems * 40-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset * Short circuit protection * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies, where appropriate * All cross-linked polyethylene wiring * Single 20 ft. wiring harness from the controller to the fuel module * UL94 rated components used throughout * Integrates into the OE ECM to allow all safety systems to remain functional * 10 to 22 V operating capacity -- Can be used with voltage boosters -- Lower than 10 V applied to the turn on circuit will cause controller shutdown to protect from an AFR lean condition
Not Yet Reviewed
$502.90
$452.61
On Sale
Aeromotive fuel pressure sensor adapters allow the installation of Aeromotive high-flow fuel rails on stock engines when keeping the stock returnless fuel system. They're manufactured from billet aluminum and are black anodized for protection. Aeromotive fuel pressure sensor adapters provide the proper sealing port, bolt pattern, and mounting hardware to accept the stock Ford fuel pressure sensor, or couple it directly to the Aeromotive high-flow fuel rail. Order the model recommended for your vehicle.
( 4 )
$12.70
—
$72.65
$11.43
—
$65.38
On Sale
Adding a Phantom direct drop-in fuel pump will require an Aeromotive fuel level sender bracket. Made from stainless steel, they are available in several styles to cover a specific range of GM truck applications. Coordinate your bracket choice with the make and year range of your vehicle.
Not Yet Reviewed
$79.00
—
$140.00
$71.10
—
$126.00
On Sale
Aeromotive VaporWorx Gen 5/6 Camaro fuel pressure regulators are mechanical units designed specifically for use with Gen5/6 Camaro fuel modules. Available in different psi options, they provide the correct fit, meaning no adapter is needed. Select the psi preferred for your fuel module.
( 2 )
$31.80
—
$42.40
$28.62
—
$38.16
On Sale
Capable of supporting 350 to 2,500 hp, Aeromotive fuel pumps are made just for serious racers. They flow 2,700 lbs./hr. of fuel, deliver 2 to 200 psi worth of fuel pressure, and work with any type of fuel. That's enough fuel flow and pressure to support a 6-second drag car—fuel injected, blown, turbocharged, or otherwise! Their belt-driven design means there's no current draw, and the pumps require no priming. They have a billet aluminum housing and bracket, a -10 AN O-ring port, and an anodized finish. The pumps are available in universal and application-specific models.
( 2 )
$1,640.30
$1,476.27
On Sale
Aeromotive A1000 Corvette Stealth kits provide fueling for standard or high-horsepower applications. No matter what add-ons you've given your late C5 or C6, the quiet, cool operation of these fuel systems have you covered! Corvette Stealth kits feature a single A1000 fuel pump capable of supporting big horsepower; it slides into your factory tank and utilizes the factory jet siphon system—1000 hp on forced induction and 1300 hp on naturally aspirated. No more drilling, no more multiple pumps to risk failure, no more surge tanks, no more mess. Aeromotive "in tank" systems offer a serious reduction in installation time and investment, too. Simply hook up your two wires, feed the line, and you're done! How many fuel pumps does your Corvette need? Just one! Whether carbureted or EFI, supercharged or turbocharged, Aeromotive A1000 Corvette Stealth kits are a truly clever fit.
( 1 )
$1,037.10
$933.39
On Sale
Aeromotive VaporWorx Ally KPM1500 returnless PWM (pulse width modulation) system kits include a KPM1500 fuel pump modified with a high-pressure regulator, returnless Ally PWM control system, and other modifications to make them work properly for FSCM-equipped vehicles and aftermarket ECM/FSCM (fuel system control module) systems. The KPM1500 features twin Bosch PWM compatible OEM pumps, fully re-engineered pump support system, robust venturi pump systems, integral safety overpressure valves, and a built-in anti-reversion/check valve, making each fuel pump very much like an OEM part. The outlet nipple has been strengthened to reduce the chances of breakage, and their operation is smooth, quiet, and easy to control. The weakness of the OEM FSCM is power capability. They can drive one high-power pump, but not two. That's where the VaporWorx Ally PWM (pulse width modulation) kit comes in. It contains everything needed to drive the second KPM1500 electrically while the OEM fuel system control module handles the primary, keeping the power separated, but control of both pumps is handled by the FSCM, and all feedback, diagnostics, fuel pressure, etc. remains functional. These kits are intended to be used as an Ally, or piggyback, system to help the OEM FSCM. No additional relays, Hobb's switches, etc. are needed. Features: * VaporWorx modified KPM1500 fuel pump module make the OEM chassis wiring plug-and-play * Using PWM to slow down the pumps is very effective in keeping fuel temperatures down and relieving the electrical system of excessive load * Ally PWM controller is a unique control strategy that helps reduce the amount of power that the FSCM produces at higher fuel demand * At higher duty cycles the Ally PWM controller will start to out-run the FSCM and take more of the pumping power load, "helping out" the fuel system control module * Approximately 71 percent+ reduction in power to the fuel pump during idle/cruise vs. running both pumps full speed all the time. Practically eliminates vapor lock/cavitation caused by overheated fuel * Fully returnless (external inline filter required) * 60-amp minimum continuous power rating in a compact controller package * Total size 4 in. L x 2.1 in. W x 1 5/8 in. H * Over-temperature shutdown with automatic reset operates indefinitely without damage * Short circuit protection that will operate indefinitely without damage * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies (where appropriate) * All cross-linked polyethylene wiring * UL94 rated components used throughout
Not Yet Reviewed
$2,917.70
$2,625.93
On Sale
Are you finding that the GM LT Series installation kit lacks some critical small parts to install the fuel system? VaporWorx is here to help. Aeromotive VaporWorx LT engine installation full kits provide exactly what you need to get the job done. Included: * Adapter fitting to convert the GM fuel module outlet to 6 AN * A 45-degree F-F swivel to start the turn to the side of the car * A 6 AN M-M union with an 1/8 in. NPT female thread on the side * Brass VaporWorx fuel pressure sensor adapter to attach the GM fuel pressure sensor. (M10 x 1mm O-ring thread to 1/8 in.-NPT male thread) * Genuine Delphi fuel module electrical plug kit
Not Yet Reviewed
$65.75
$59.18
On Sale
Aeromotive VaporWorx BoostWorx PWM controllers for ZL1 LSA applications have everything needed to provide a standalone, OE-type returnless fuel system that meets the GM LSA crate engine fuel pressure requirements. Please note, these kits are intended to be used with the GM LSA ECM and a wiring kit for the LSA engine only. When used with the Gen5/6 Camaro ZL1 fuel module, these controllers provide the needed manifold referenced (MAP sensor based) fuel pressure that cannot be met with traditional return-type pressure regulators. BoostWorx PWM ZL1 LSA fuel module controllers feature: * Everything needed electrically to drive the fuel pump module -- No relays, external regulators, or return lines needed -- 650 hp capable * Unmatched low fuel level capability when used with an OEM-style fuel module * Calibrated specifically for the LSA crate engine controller * A 50 percent reduction in power to the fuel module during idle and cruise vs. traditional systems * 40-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset * Short circuit protection * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies, where appropriate * All cross-linked polyethylene wiring * Single 20 ft. wiring harness from the controller to the fuel module * UL94 rated components used throughout * Integrates into the OE ECM to allow all safety systems to remain functional * 10 to 22 V operating capacity -- Can be used with voltage boosters -- Lower than 10 V applied to the turn on circuit will cause controller shutdown to protect from an AFR lean condition
Not Yet Reviewed
$502.90
$452.61
On Sale
Aeromotive offers fuel pressure regulator adapters for a variety of applications, including Gen 4 Camaro 4 Bar/58 psi pressure regulators ONLY on Gen5/6 Camaro SS fuel modules. They also fit Gen 6 Camaro and CTS-V3 (2015+) fuel modules. These aluminum adapters include a black anodized finish—and are machined in accordance with factory specifications to ensure proper fitment and long-lasting performance.
Not Yet Reviewed
$15.95
$14.36
On Sale
Are you finding that the GM LT Series installation kit lacks some critical small parts to install the fuel system? VaporWorx is here to help. Aeromotive VaporWorx LT engine installation partial kits provide the sensor adapter and electrical plug kit needed to get the job done. Included: * Brass VaporWorx fuel pressure sensor adapter to attach the GM fuel pressure sensor. (M10 x 1mm O-ring thread to 1/8 in.-NPT male thread) * Genuine Delphi/Aptiv fuel module electrical plug kit
Not Yet Reviewed
$29.70
$26.73
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
